BRINLY 1020231-10 Push Aerator Installation Guide
- June 15, 2024
- BRINLY
Table of Contents
1020231-10 Push Aerator
Installation Guide
PARTS
Ref. | Part # | Description | Qty |
---|---|---|---|
1 | 1020370 | Side Plate; Left | 1 |
2 | 1020371 | Side Plate; Right | 1 |
3 | 1020231-10 | Tray | 1 |
4 | 1020236 | Axle | 1 |
5 | 1018833 | Aerator Tines | |
– Replacement Tine Pack, Qty: 5x (# 1020238) | 5 | ||
6 | 1020232-10 | Handle Tube; Lower | 2 |
7 | 1020233-10 | Handle Tube; Middle | 2 |
8 | 1020234-10 | Handle Tube; Upper | 2 |
9 | 1020235 | Handle Grip | 2 |
10 | 1020200 | Hardware Bag ** | 1 |
11 | 1020363 | Bearing Bag ** | 1 |
Installation Questions?
Missing Parts?
Replacement Parts?
DON’T GO BACK TO THE STORE!
Please call our Customer Service Department, Toll Free:
877-728-8224 or
customerservice@brinly.com
Illustrations on this page are to scale for faster identification of hardware
during assembly.
DO NOT RETURN PRODUCT IF YOU ARE MISSING PARTS.
Please Call: 1 877-728-8224
12| Bolt; Hex Head, M6 x 1.00 x 30 (x4)
M06H10030P05|
---|---|---
13| Bolt; Hex Head, M6 x 1.00 x 50 (x1)
M06H10050P05|
14| Bolt; Hex Head, M8 x 1.25 x 20 (x6)
M08H12520P05|
15| Bolt; Hex Head, M8 x 1.25 x 50 (x4)
M08H12550P05|
16| Bolt; Hex Head, M8 x 1.25 x 65 (x2)
M08H12565P05|
17| Bolt; Hex Head, M6 x 1.00 x 55 (x2)
M06H10055P05|
18| Locknut; Nylon,M6 x 1.00 (x7)
M06N100P05|
19| Locknut; Nylon, M8 x 1.25 (x12)
M08N125P05|
20| Washer; M8 (x8)
M08P16016FL|
21| Washer; Flat, M16 (x6)
M16P30030FW|
22| Cotter Pin 3.5mm, (x2)
M16P30030FW|
Ref.| Part #| Description| Qty
---|---|---|---
10| 1020200| Hardware Bag| 1
12| M06H10030P05| Bolt; Hex Head, M6 x 1.00 x 30| 4
13| M06H10050P05| Bolt; Hex Head, M6 x 1.00 x 50| 1
14| M08H12520P05| Bolt; Hex Head, M8 x 1.25 x 20| 6
15| M08H12550P05| Bolt; Hex Head, M8 x 1.25 x 50| 4
16| M08H12565P05| Bolt; Hex Head, M8 x 1.25 x 65| 2
17| M06N100P05| Locknut; Nylon, M6 x 1.00| 7
18| M08N125P05| Locknut; Nylon, M8 x 1.25| 12
19| M08P16016FL| Washer, M8| 8
20| M16P30030FW| Washer; Flat, M16| 6
21| 1020239| Cotter Pin, 3.5mm| 2
22| 1020237| Wheel| 2
24| M06H10055P05| Bolt; Hex Head, M6 x 1.00 x 55| 2
11| 1020363| Bearing Bag| 1
23| B-5425| Bearing| 10
EXTRA PARTS:
Four extra washers are provided, however, may not be needed after Step 2. (
20, Flat Washer; M16 – Qty. 4 Remaining )
1020202-C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>