ZEBRONICS ZEB-BT7451RUCF 5.1 Multimedia Speaker with FM User Manual
- June 15, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-BT7451RUCF 5.1 Multimedia Speaker with FM
Thank you for purchasing the ZEB-BT7451 RUCF 5.1 Speaker. Please read this user manual carefully and keep for future reference.
Warning
-
To prevent fire or electric shock do not expose the unit to rain or moisture.
Note: This product is for indoor use only. -
Refer servicing to qualified personnel only.
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the manual accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions before using the product.
- Read all the warnings carefully.
- Follow all instructions carefully.
- Do not use this unit near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install by the manufacturer’s instructions.
- Do not install the speaker system near any heat sources such as radiators, heat registers, stoves, or other units (including amplifiers)that produce heat.
- Protect the power cord from being walked on or pinched particularly at plug points and the point where they exit from the unit.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the unit. When a cart is used, be cautious while moving the cart/unit combination to avoid injury from tip-over.
- Unplug this unit during lightning storms or when unused for a long period. Refer all servicing to qualified service personnel.
Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
Package contents
- Subwoofer: 1 U
- Satellite: 5 U
- Remote control: 1 U
- Input cable: 1 U
- Antenna cable: 1 U
- Wall mount: 1 U
- Screws: 1 U
- Stereo to RCA adapter: 1 U
- QR Code Guide: 1 U
How to use the BT:
- select the audio input to BT mode.
- search BT device with name “ZEB-BT7451 RUCF”.
- connect the BT.
- if your BT device below 5.0 version, input password “OOOO”when connecting.
Product Representation
Front Panel
Front panel top description
- STANDBY: Stand by function by pressing it 3 secs in AUX/ USB/SD/FM/BT mode.
- INPUT: lnputfunction key.
- 5.1/2.1: 5.1 /2.1 function key.
- /AUTO: Play/Pause in USB/SD mode. Automatic FM radio search by pressing 3 secs.
- CH-NOL- Previous track in USB/SD/BT mode; Previous saved channel in FM mode.
- CH+NOL + Next track in USB/SD/BT mode; Next saved channel in FM mode;
- SD/MMC CARD: SD CARD Slot.
- U Disk: USB Slot.
AC Power
Important Notes
- Make sure that the power supply is proper and never handle the power cord or its plug with wet hands when plugging into, or unplugging from a plug-point.
- Ensure that the main power switch is in the “OFF” position before connection the AC power cord to the power supply to avoid damage to the unit.
- A damaged power cord can easily cause an electric shock or fire; Never use a power cord after it has been damaged.
Battery Installation
Remote Control
- **** Power switch button (Standby) switch On or off
- SD SD Input
- USB USB Disk
- FM FM Radio
- AUX AUX Input
- DVD AC-3 input for 5.1 mode audio source.
- BT BT Input
- SAVE Save FM Channel
- 5.1/2.1 5.1 /2.1 mode
- TUNER-/+ Previous/Next Channel Keep Pressing to search the channel
- **** Play & pause
- AUTO Press and Hold for 2-3 sec to begin FM auto scan
- **** Previous track when USB/BT Input
- CH- Previous Channel When FM Input
- **** Next track when USB/BT Input
- CH+ Next Channel When FM Input
- VOL-/+ To Increase I Decrease master Volume
- SW-/+ To calibrate the woofer sound level
- FL-/+ To calibrate the front left speaker level
- FR -/+ To calibrate the front right speaker level
- CEN-/+ To calibrate the center level
- SL-/+ To calibrate the surround left level
- SR-/+ To calibrate the surround right level
- SLEEP-/+ Time choice 0/10/20/30/45/60/90/120
- REPEAT Repeat Mode
- RESET When the Volume is at The Maximum, Press “RESET” Button at The Status While Power On
- DIS-/+ Display level adjustment
- ECHO To Increase I Decrease MIC Echo
Note: Insert the plugs fully into the jacks. Loose connections may produce noise interference.
Woofer rear panel description
Output connectivity
Speaker Terminals
Connect front speakers, center speaker, surround speakers to 5.1 speaker
output terminals.
- The front speaker’s cords to the FRONT SPEAKERS terminals.
- The center speaker’s cords to the CENTER SPEAKERS terminals.
- The surround speaker’s cords to the SURROUND SPEAKER terminals.
Note: *Do not leave objects generating magnetism near the speakers.
Woofer rear panel description
- Input connectivity
Unit Operation
- First plug the cable of all the satellite into the output jack on the rear panel of the woofer, one end of the audio cord into the input jack on the rear panel, the other end into the output jack of the computer or any external audio source, the power cord into the power plug socket. Then switch on the unit, the LED will be blinking in the front panel, when the standby button is being pressed the unit lights up.
- Pressing the VOL + and VOL – button will enable the volume levels to be increased & decreased.
- When the 5.1/2.1 button is pressed, it plays back the track from stereo to 5.1 channel in all modes which is indicated through the blue led for the selected mode.
- When in FM mode, press and hold PLAY/PAUSE button in the front panel of the woofer or the AUTO button in the remote for 2-3 seconds the automatic scanning will be proceeded and once after scanning it will playback the first channel of the full scan done.
- When inserted a USB Drive, it will play from the device last inserted, the input mode will be changed to USB Drive on the display and starts playing from the beginning or auto resumed from the track of the last time playback.
- When USB Drive is working, press the PLAY/PAUSE button to pause the music, press the PLAY/PAUSE button again to resume music.
- When USB Drive is playing, press the MODE button to cycle through the LINE IN, USB, FM, BT mode.
- When USB Drive is working, press the PREVIOUS and NEXT button to choose the previous or the next audio track.
- After stop using the unit, Use the stand by button to turn off the unit, switch off the power switch, unplug the power cord.
Specification
- Output Power (RMS)
- Subwoofer: 30 Watts
- Satellite: 12 Watts x 5
- Total: 90 Watts
- Driver size
- Subwoofer: 10.16 cm
- Satellite: 7 cm x 5
- Impedance
- Subwoofer: 4 Ω
- Satellite: 4 Ω
- Frequency response: 40Hz-20kHz
- S/N Ratio: ≥ 75dB
- Separation: ≥ 50dB
- File format support (USB): Mp3, WMA, WAV, FLAC,APE
- Line input: 2ch RCA, 5.1
- Max. supported USB memory size: 128GB
- FM frequency scan range: 87.5MHz – 108MHz
- BT name: ZEB-BT7451 RUCF
- BT version: v5.0
- Product dimension (W x D x H)
- Subwoofer: 14 x 31.3 x 25.8 cm
- Satellite: 9 x 9.5 x 13 cm
- Net. weight
- Subwoofer: 2.96kg
- Satellite: 304g X 5
- Total: 4.5kg
Features
- 5.1 channel speaker
- BT v5.0 / USB /SDI FM /AUX/ AC-3
- LED display
- Stylish design
- Powerful! subwoofer
- Remote control
- Wall mountable
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>