GEARELEC GX10 V5.2 BT Motorcycle Bluetooth Headset User Manual

HELMET BLUETOOTH
INTERCOM SYSTEM
(Gx1o)

Description

Thank you for choosing the GEARELEC GX10 helmet Bluetooth multi person intercom headset, which is designed for motorcycle riders to meet the functional needs to achieve multi person communication, answering and making calls,  listening to music, listening to FM radio, and receiving GPS navigation voice during riding. It offers a clear, safe and comfortable riding experience.
GEARELEC GX10 has adopted new v5.2 Bluetooth which provides stable system operation, dual intelligence noise reduction, and low power consumption. With 40mm high-quality speakers and the smart microphone, it supports  connection to multiple devices, realizing multi person communication. It is also compatible with third-party Bluetooth products. It is a high-tech Bluetooth multi person intercom headset that is fashionable, compact, energy-saving and environment-friendly, and has a user-friendly design.

Parts

Feature

• Qualcomm Bluetooth voice chip version 5.2;
• Intelligent DSP audio processing, CVC 12th generation noise reduction processing, 16kbps voice bandwidth transmission rate;
• One click networking of multi person communication, 2-10 rider communication at 1000m (ideal environment);
• Instant connecting and pairing;
• Music sharing;
• FM radio;
• 2-language voice prompt;
• Phone, MP3, GPS voice Bluetooth transfer;
• Voice control;
• Automatic call answer and last called number redial;
• Intelligent microphone pickup;
• Support voice communication at the speed of 120 km/h;
• 40mm tuning speaker diaphragms, shock music experience;
• IP67 waterproof;
• 1500 mAh battery: 25 hours of continuous intercom/call mode, 40 hours of music listening, 100 hours of regular standby (up to 400 hours without data network connection);
• Supports pairing with third-party Bluetooth intercoms;

Target Users

Motorcycle and bicycle riders; Ski enthusiasts; Delivery riders; Electric bike riders; Construction and mining workers; Fire fighters, traffic police, etc.

Buttons and Operation

Power on/off
Power on: Press and hold the Multifunction button for 4 seconds and you will hear a ‘Welcome to Bluetooth Communication System’ voice prompt and the blue light will flow once.
Power off: Press and hold the Multifunction button for 4 seconds and you will hear a ‘Power off’ voice prompt and the red light will flow once.
Factory reset: In power-on state, press and hold the Multifunction button + Bluetooth Talk button+ M button for 5 seconds. When the red and blue lights are always-on for 2 seconds, the factory reset is completed.

Calling
Answer incoming calls: When there is an incoming call, press the Multifunction button to answer the call;
Auto call answer: In standby state, press and hold the Multifunction+ M buttons for 2 seconds to activate automatic call answering;

Reject a call: Press and hold the Multifunction button for 2 seconds as soon as you hear the ringtone to reject the call;
Hang up a call: During a call, press the Multifunction button to hang up the call;
Last number redial: In standby state, double click the Multifunction button to call the last number that you have called;
Disable auto call answer: Press and hold the Multifunction+ M buttons for 2 seconds to turn off automatic call answering.

Music control

1. Play/pause: When the intercom is in Bluetooth connected state, press the Multifunction button to play music;
   When the intercom is in music playback state, press the Multifunction button to pause the music;

2. Next song: Press and hold the Volume up button for 2 seconds to select the next song;

3. Previous song: Press and hold the Volume down button for 2 seconds to switch back to the previous song;

Volume adjustment

Press the Volume up button to increase the volume and the Volume down button to decrease the volume
FM radio

1. Turn on the radio: In standby state, press and hold the M and Volume down buttons for 2 seconds to turn on the radio;
2. After turning on FM radio, press and hold the Volume up/down for 2 seconds to select stations (Note: Pressing the Volume up/down button is to adjust volume. At this time, you can increase or decrease the volume);
3. Turn off the radio: Press and hold M and Volume down buttons for 2 seconds to turn off the radio;

Notice:

1. When listening to the radio indoors where the signal is weak, you can try to place it close to the window or in open space and then turn it on.
2. In radio mode, when there is an incoming call, the intercom will automatically disconnect the radio to answer the call. When the call is over, it will switch back to radio automatically.

Switching voice prompt languages

It has two voice prompt languages to  choose from. In power-on state, press and hold the Multifunction button, Bluetooth Tai button, and volume up buttons for 5 seconds to switch between the 2 languages.

Pairing Steps

Pairing with your phone via Bluetooth

1. Turn on Bluetooth: In power-on state, hold the M button for 5 seconds until the red and blue lights flash alternatively and there will be a ‘pairing’ voice prompt, waiting for connecting; if connected to other devices before, its blue  light will flash slowly, please reset the intercom and power it on again.
2. Search, pair, and connect: In the state of red and blue lights flashing alternatively, open Bluetooth setting on your phone and let it search nearby devices. Select the Bluetooth name GEARELEC GX10 to pair and input password  0000 to connect. After connection is successful, there will be a ‘Device Connected’ voice prompt meaning pairing and connecting are successful. (Enter ‘0000’ if password is required for pairing. If not, just connect.)
   

Notice
a) If the intercom has been connected to other devices before, the blue indicator light will flash slowly. Please reset the intercom and power it on again.
b) When searching Bluetooth devices, choose the name ‘GEARELEC GX10’ and input password ‘0000’. If pairing is successful, there will be a ‘Device Connected’ voice prompt; if re-connecting fails, forget this Bluetooth name and search and connect again.(Enter ‘0000’ if password is required for pairing. If not, just connect.)

Pairing with Other Intercoms

Pairing with a second GX10
Active/passive pairing steps:

1. Power on 2 GX10 units (A and B). Hold the M button of unit A for 4 seconds, the red and blue lights will flash alternatively and quickly, meaning passive paring mode is activated;
2. Hold the Bluetooth Talk button of unit B for 3 seconds, the red and blue lights will flash alternatively and slowly, meaning active pairing mode is activated. Start paring actively after hearing a ‘Searching’ prompt;
3. When the 2 units are connected successfully, there will be a voice prompt and their blue lights will flash slowly.
   

Notice
a) After pairing is successful, an incoming call will automatically disconnect communication when in intercom mode and it will switch back to intercom mode when the call is over;
b) You can press the Bluetooth Talk button to reconnect the disconnected devices due to range and environmental factors when in communication with each other.
c) In communication standby state, press the Bluetooth Talk button to communicate; then press the button to turn off intercom mode, press the Volume up/down button to increase/decrease the talk volume.

One-key-networking of Multiple GX10s

Automatic pairing steps (take 6 GX10 units for instance)

1. Power on all the 6 GX10 intercoms (123456), hold the M buttons to activate passive pairing mode and the red and blue lights will flash quickly and alternatively;
2. Press the Multifunction button of any unit (No.1 unit), the red and blue lights will flash slowly and alternatively and then No.1 unit will enter automatic pairing mode along with a ‘pairing’ voice prompt;
3. After pairing is successful, there will be a ‘Device Connected’ voice prompt.

Notice
Due to various use environment, large external interference, and many environmental interference factors, it is recommended to communicate with multiple riders within 1000 meters. Longer the range, more interference there will be,  affecting the riding experiences.

Music Sharing (between 2 GX10 Units)

How to turn on
With both GX10 in power on state, music can only be shared in one direction. For example, if you want to share music from GX10 A to GX10
B, then the instructions are as follows:

1. Connect A to your phone via Bluetooth (Open a music player and keep music in pause state);
2. Pair and connect A to B (Keep both in non-intercom mode);
3. After pairing is successful, press and hold the Bluetooth Talk and M buttons of A for 3 seconds to turn on music sharing, and there will be slow flashing blue lights and a ‘Start Music Sharing’ voice prompt, indicating music is shared  successfully.

How to turn off
In music sharing state, press and hold the Bluetooth Talk and M buttons of A for 3 seconds to turn off music sharing. There will be a ‘Stop Music Sharing’ voice prompt.

EQ Sound Settings
In music playback state, press the M button to enter EQ setting. Each time you press the M button, it will switch to the next sound effect along with a voice prompt of Middle Range Boost/Treble Boost/Bass Boost.
Voice Control
In standby state, press the M button to enter voice control mode. The blue light will flash slowly.
Last Number Redial
In standby state, press the Multifunction button twice to redial the last number that you called.
Factory Reset
In power on state, hold the Multifunction, Bluetooth Talk, and M buttons for 5 seconds. The red and blue lights will be always-on for 2 seconds.
Battery Level Prompt
In standby state, press the Bluetooth Talk and M buttons and there will be voice prompt of the current battery level. Also, there will be low battery level prompt.
Flowing Light Mode
In Bluetooth standby state, hold the M and Volume up buttons for 2 seconds.
The red flowing light flashes twice when turning on/off flowing light.
Colorful Light Mode
In Bluetooth standby and flowing light on state, press the M and Volume up buttons to turn on colorful light mode. The color of the light can be switched in order.
Notice
It will automatically shut down after 15 minutes of standby.

Installation (2 Methods)

Method 1: Install with the adhesive mount

Mounting Accessories

1. Install the intercom into the mount

2. Attach the double sided adhesive on the mount

3. Install the intercom with adhesive onto the helmet

Quick removal of the intercom on the helmet
Unplug the headset, hold the intercom with fingers, then push up the intercom, and you can remove the intercom from the helmet.

Method 2: Install with the clip mount

Mounting Accessories

Install the metal clip onto the mount

Quick removal of the intercom on the helmet
Unplug the headset, hold the intercom with fingers, then push up the intercom, and you can remove the intercom from the helmet.

GX10 Parts & Accessories

Charging instructions

1. Before using the Bluetooth intercom, please use the provided charging cable to charge it. Plug the USB Type-C connector into the USB C charging port of the Bluetooth intercom. Connect the USB A connector to a USB A port of the  following power supply:
   A. A USB A port on a PC
   B. A DC 5V USB output on a power bank
   C. A DC 5V USB output on a power adapter

2. The indicator is an always-on red light when charging and then goes out when fully charged. It takes about 1.5 hours from a low battery level to a full charge.

Parameter

25 hours talk time with lights always-on
Music time:| up to 40 hours
Charging time:| about 1.5 hours
Power adapter:| DC 5V/1A (NOT included)
Charging interface:| USB Type-C port
Operating temperature:| 41-104 °F (5-40 °C)

Precaution

1. If the intercom is not used for one month or more, to protect its lithium battery, please charge it every two months.

2. The applicable storage temperature of this product is – 20 C to 50 ° C.
   Do not store it in an environment where the temperature is too high or too low, otherwise the service life of the product will be affected.

3. Do not expose the product to open fire to avoid explosion.

4. Do not open the device by yourself to avoid short circuit of the main board or battery damage, which will affect normal use. Keep that in mind.

Wireless Connects You with Me and Brings Just What Lives Need!

Made in China

Documents / Resources

| GEARELEC GX10 V5.2 BT Motorcycle Bluetooth Headset [pdf] User Manual
GX10 V5.2 BT Motorcycle Bluetooth Headset, GX10, V5.2 BT Motorcycle Bluetooth Headset, Motorcycle Bluetooth Headset, Bluetooth Headset, Headset
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>