CASIO 4755 Smart Watch User Guide

CASIO 4755 Smart Watch

Product Information

Specifications:

• Model: MA0606-EA
• Operation Guide: 4755

Description:
The product is a watch with multiple hands and a stopwatch feature. It has an hour hand, a minute hand, and a second hand. The watch also includes a crown for setting the time and adjusting the stopwatch hands. Additionally, it has an elapsed time bezel for measuring time intervals.

Product Usage Instructions

Setting Time:

1. Pull the crown out when the second hand is at the 12 o’clock position and the second hand stops.
2. Rotate the crown to set the hands. Move the minute hand four or five minutes past the desired time, and then back it up to the correct setting.
3. Push the crown back in to its normal position.

Using the Stopwatch:
The stopwatch allows you to measure elapsed time up to 11 hours, 59 minutes, and 59 seconds.

Elapsed Time:

1. Press the “Start” button to begin measuring elapsed time.
2. Press the “Stop” button to pause the stopwatch.
3. Press the “Re-start” button to resume measuring elapsed time.
4. Press the “Stop” button again to stop measuring elapsed time.
5. Press the “Clear” button to reset the stopwatch.

Adjusting Stopwatch Hands:

1. Press the “B” button to reset the stopwatch and check the alignment of the stopwatch minute hand and second hand.
2. Pull out the crown to enter adjustment mode.
3. Press the “A” button to move the stopwatch second hand forward until it points to the 12 o’clock position.
4. Push the crown back in to its normal position to complete the adjustment.

Elapsed Time Bezel:
If your watch has an elapsed time bezel, follow these steps:

1. Rotate the elapsed time bezel to align the mark with the minute hand.
2. After a certain amount of time has elapsed, read the graduation on the elapsed time bezel where the minute hand points to. This indicates the elapsed time.

FAQ (Frequently Asked Questions)

Q: How long can the stopwatch measure elapsed time?
A: The stopwatch can measure elapsed time up to 11 hours, 59 minutes, and 59 seconds.

Q: How do I adjust the positions of the stopwatch hands?
A: To adjust the positions of the stopwatch hands, follow these steps:

1. Press the “B” button to reset the stopwatch and check alignment.
2. Pull out the crown.
3. Press the “A” button to move the stopwatch second hand forward until it points to the 12 o’clock position.
4. Push the crown back in to its normal position.

Q: How do I use the elapsed time bezel?
A: If your watch has an elapsed time bezel, follow these steps:

1. Rotate the elapsed time bezel to align the mark with the minute hand.
2. After a certain amount of time has elapsed, read the graduation on the elapsed time bezel where the minute hand points to. This indicates the elapsed time.

Operation Guide 4755

To set the time

1. Pull the crown out when the second hand is at 12 o’clock position and the second hand stops.
2. Set the hands by rotating the crown. Rotate the crown to move the hands. Move the minute hand four or five minutes past the time you want to set, and then back it up to the proper setting.
3. Push the crown back in to the normal position.

Using the Stopwatch

The stopwatch lets you measure elapsed time up to 11 hours, 59 minutes, 59 seconds.

To measure times with the stopwatch

To adjust the positions of the stopwatch second hand

1. Press B to reset the stopwatch, and check the alignment of the stopwatch minute hand and second hand.
2. Pull out the crown.
3. Press A to move the stopwatch second hand forward until it points to the 12 o’clock position.
4. Push the crown back in to its normal position.

For a watch with an elapsed time bezel

• Rotate the elapsed time bezel to align the mark with the minute hand.
• After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated.
• Some water resistant models are equipped with a screw lock crown.
• With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns.
• Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>