BZB GEAr BG-UHD-1616M 8Gbps 16×16 HDMI Matrix User Manual

BZB GEAr BG-UHD-1616M 8Gbps 16×16 HDMI Matrix

Introduction

The BG-UHD-1616M 18Gbps 16×16 HDMI Matrix transmits video with resolutions up to 4K2K@ 60Hz YUV 4:4:4, and multi-channel high resolution digital audio from 16 HDMI sources to 16 HDMI displays. Extract audio from any of the 16 HDMI output via the coaxial ports. When the HDMI output ARC function is enabled, the ARC audio from any of the HDMI display devices may be extracted via the coaxial audio outputs. Each of the 16 HDMI outputs independently supports 4K2K to 1080P downscaling. Control can be accomplished via the front panel buttons, IR remote, RS-232, LAN and Web GUI.

Features

• HDMI 2.0b, HDCP 2.2/1.x and DVI 1.0 compliant
• Video resolution up to 4K2K@60Hz (YUV 4:4:4) on all HDMI ports
• 18Gbps video bandwidth
• HDR, HDR10, HDR10+, Dolby Vision and HLG
• 4K->1080P Down Scaler for each output port
• HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD and DTS-HD Master Audio)
• Audio de-embed is supported via coax ports
• ARC, CEC and smart EDID management
• 1U rack mounted design with front panel OLED display
• Control via front panel buttons, IR remote, RS-232, LAN and Web GUI

Package Contents

1. 1 x 18Gbps 16×16 HDMI Matrix
2. 1 x 24V/3.75A Power Adapter
3. 1 x IR Remote
4. 1 x RS-232 serial cable (1.5 meters, male to female head)
5. 2 x Mounting Ear
6. 1 x User Manual

Specifications

Technical|
---|---
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2/1.x
Video Bandwidth| 18Gbps
Video Resolution| Up to 4K2K@60Hz (4:4:4)
Color Space| RGB, YCbCr 4:4:4/4:2:2/4:2:0
Color Depth| 8-bit, 10-bit, 12-bit
HDMI Audio Formats (Pass-through)| LPCM 2/5.1/7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Coax Audio Formats| LPCM 2.0, Dolby Digital / Plus, DTS 5.1
HDR formats| HDR10, HDR10+, Dolby Vision, HLG
ESD Protection| Human-body Model:

±8kV (Air-gap discharge) , ±4kV (Contact discharge)

Connection
Input Ports| 16×HDMI Type A [19-pin female]
Output Ports| 16×HDMI Type A [19-pin female]

16×Coax Audio (RCA)

Control Ports| 1×TCP/IP [RJ45]

1×RS-232 [D-Sub 9]

Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| 440mm (W)×200mm (D)×44mm (H)
Weight| 3.1kg
Power Supply| Input: AC 100 – 240V 50/60Hz, Output: DC 24V/3.75A

(US/EU standard, CE/FCC/ULcertified)

Power Consumption| 76.8W
Operating Temperature| -10°C ~ 45°C / 14°F ~ 113°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Resolution / Cable length| 4K60 –

Feet / Meters

| 4K30 –

Feet / Meters

| 1080P60 –

Feet / Meters

HDMI IN / OUT| 16ft / 5M| 32ft / 10M| 50ft / 15M
The use of “Premium High-Speed HDMI” cable is highly recommended.

Operation Controls and Functions

Front Panel

Baud rate, and current IP Address.
2| Power LED| The LED will illuminate green when the unit is connected

to the power supply, and red when the unit is on standby.

3| Input / Output buttons| Press input button (1~16) first, then press the “AV” button, then press output button (1~16, including “ALL”) to select the corresponding input and output ports.

4

| ****

AV / ALL buttons

| AV: Switch the signal source to output

e.g. Pressing “1→AV→3” represents signal source 1 is output to display 3.

All: Represents all the output ports.

e.g. Pressing “1→AV→ALL” represents signal source 1 is

the output to all displays.

5

| ****

MENU / ENTER

/ UP /DOWN

| ① EDID check: On the main OLED display screen, press

the “MENU” button to enter the Matrix switching status

interface, then press the “UP/DOWN” button to check the switching status of all the ports.

② EDID setting: On the main OLED display screen, press

the “MENU” button to enter the EDID setting interface, press

the “UP/DOWN” button to select the required EDID and press the “ENTER” button. A prompt “copy to input:” will appear.

Then press the “UP/DOWN” button to select the input port to set, and then press the “ENTER” button to confirm.

③ Baud rate setting: On the main OLED display screen, press the “MENU” button to enter the Baud rate interface, and

press the “UP/DOWN” button to select the required Baud rate, finally press the “ENTER” button to confirm the setting.

④ IP Address check: On the main OLED display screen, press the“MENU” button to enter the I P interface, then press

the “UP/DOWN” button to check the current IP address. Pressing the “MENU” button again will return to the main OLED display status.

6| IR Window| IR receiver window only receives the IR remote signal from this product.

Rear Panel

cable.
2| RS-232 port| Connect to a PC or control system by D-Sub 9-pin cable to transmit RS-232 command.
3| AUDIO OUT (1-16)| Coaxial audio output port, connect to audio output device such as audio amplifier via a coaxial cable.
4| DC 24V| Connect to 24V power adapter.
5| GND| Connect the housing to the ground.
6| INPUT ports (1-16)| HDMI input ports, connect to an HDMI source device such

as a media player or cable box with an HDMI cable.

7| OUTPUT ports (1-16)| HDMI output ports, connect to an HDMI display device such as TV or monitor with an HDMI cable.

IR Remote

1. Power on or Standby: Power on the Matrix or set it to standby mode.

2. Input 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16:
   Select input source button.

3. Output 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16: Select output source button.

4. All: Select all output sources simultaneously.
   For example, press input “1” button, then press the “All” button. The input “1” source will output to all the display devices.

Operation instruction: Press the input button first, then the press output button. For example,
Press Input-Y (Y = input button from 1 to 16).Then press Output-X (X = output button from 1 to 16, including “All” button)

EDID Management

• The BG-UHD-1616M has 21 factory defined EDID settings, 2 user-defined EDID modes and, 16 copy EDID modes. Select defined EDID mode, or copy EDID mode to input port through the front panel buttons, RS-232 control or WebGUI.
• On-panel button operation: On the main OLED display screen, press the “MENU” button to enter the EDID setting interface. Press the “UP/DOWN” button to select the required EDID, then press the “ENTER” button. A
• prompt “copy to input:” will appear. Press the “UP/DOWN” button to select the input port you need to set, and press the “ENTER” button again to confirm this operation.
• RS-232 control operation: Connect the Matrix to a PC with a serial cable, then open a
• Serial Command tool on PC to send ASCII commands to set EDID. For details, refer to
• “EDID Setting” under the ASCII command list in section 9 of this manual.
• WebGUI Operation: Check the EDID management in the “Input page” of “8. Web GUI User Guide”.

The defined EDID settings list:

Web GUI User Guide

The BG-UHD-1616M may be controlled by a WebGUI. The operation method is shown below:
Step 1: Find the current IP Address. The default IP address is 192.168.1.100. Find the current Matrix IP address in two ways:

1. Find the IP address via the panel buttons. On the initial OLED display, press the “MENU” button to enter the IP interface, then press the “UP/DOWN” button to check the current IP address.
2. Find the IP address via RS-232 control. Send the command “ r ipconfig!” through an ASCII Command tool, the following information will then populate:

IP:192.168.62.100 in the above figure is the IP Address of the Matrix (the IP address is variable, depending on what the specific machine returns).
For the details of ASCII control, please refer to section 9 of this manual.
Step 2: Connect the TCP/IP port of the Matrix to a PC using a UTP cable. Set the IP address of the PC to be in the same network segment with the Matrix.
Step 3:Input the current IP address of the Matrix into the PC’s browser to enter WebGUI page.

After entering the WebGUI page, the following login page will be displayed:
Select the Username from the list and enter the password. The default login information:
After entering the password, click the “LOGIN” button and the following Status page will displayear:

Status Page

The Status page provides basic information about the model, installed firmware version, and the network settings of the device.

Video Page

The following operations may be performed on the Video page:

1. Output: The current device’s OUTPUT port. The input signal source may be selected.
2. All Output: All OUTPUT ports for the current device. Select the input source for all.
3. Input: Click the drop-down menu to select input source for the corresponding OUTPUT port.
4. Presets Name: Name the current scene with maximum length of 12 characters
5. Presets Set: Restore the settings of the last saved audio-video matrix switching configuration.
6. Presets Save: Save audio-video matrix switching configuration.
7. Presets Clear: Clear the saved audio-video matrix switching configuration.

Input Page

The following operations may be performed on the Input page:

1. Inputs: HDMI Input channel of the device.
2. Active: Indicates if the channel is connected to an input source.
3. Name: The input channel’s name. Modify it by entering t he corresponding name (max length: 12 characters) in the input box.
4. EDID: Set the current channel’s EDID. The specific operation is as follows:

S et EDID for the User
Click the “Browse” button, then select the bin file. Selecting the wrong EDID file will cause the prompt below to display: ****
Select the correct file, then check the name of the selected file. Select “User 1” or “User 2”, then click “Upload”. After successful setting, the prompt below to display:

Download the EDID File of the Corresponding Input Channel
Click the drop-down box of “Select EDID File” to select the corresponding input channel. Then click “Download” to download the corresponding EDID file.

Output Page

The following operations may be performed on the Output page:

1. Outputs: Output channel of the device.
2. Cable: Indicates the connection status of the output ports. When the output port is connected to the display, it shows green, otherwise, it shows yellow.
3. Name: The current output channel’s name. Modify it by entering the corresponding name (max length: 12 characters) in the input box.
4. Scaler Mode: Set the current output resolution mode.
5. ARC: Turn on/off the ARC function.
6. Stream: Turn on/off the output stream.

CEC Page

Perform the CEC management on this page:

1. Input Control: Control the operation of each input source by clicking the icons on the page.
2. Output Control: Control the operation of each display, such as power on/off, volume+/-, and active source switching.

Network Page

Set the Default Network
Click “Set Network Defaults”, and the prompt below will display:
Click “OK” to search the IP Address again, as shown in the following figure:
After searching has completed, it will switch to the login page, and the default network setting has been completed.

Modify Username
Click the “User” button, enter the correct old password, new password, and confirm password, then click “Save”. After successfully modifying, the following prompt will display:

Note : Input rules for changing passwords:

1.  The password cannot be empty.
2.  New password cannot be the same as old password.
3.  New password and confirm password must be the same.

Modify Network Setting
Modify the Mode/IP Address/Gateway/Subnet Mask/Telnet Port as required, click “Save” to save the settings for it to take effect.
After modification, if the mode is “Static”, it will switch to the corresponding IP Address; if the mode is “DHCP”, it will automatically search and switch to the IP address assigned by the router.

System Page

1. Panel Lock: Click the “Panel Lock” to lock/unlock panel buttons. “On” indicates the panel buttons are unavailable; “Off” indicates panel buttons are available.
2. Beep: Click “Beep” to turn on/off the beep.
3. LCD: Turn the LCD on/off, and set the turn-on time (15s/30s/60s).
4. Serial Baud Rate: Click the value to set the Serial Baud Rate.
5. Firmware Update: Click “Browse” to select the update file, then click “Update” to complete firmware update.
6. Factory Reset: Reset the unit to factory defaults by clicking “Reset”.
7. Reboot: Reboot the unit by clicking “Reboot”.
   Note: After reset/reboot, it will switch to the login page.

RS-232 Control Command

The BG-UHD-1616M supports RS-232 control. A serial cable with RS-232 male head and DB9 transfer USB male head is required. The RS-232 head of the serial cable is connected to the RS-232 control port with DB 9 at the rear of the Matrix, and the USB end of the serial cable is connected to a PC. The connection method is as follows:

Open a Serial Command tool on a PC to send ASCII command to control the Matrix. The ASCII command list is given below:

ASCII Command

Serial port protocol. Baud rate: 115200, Data bits: 8bit, Stop bits:1, Check bit: 0
x – Parameter 1 y – Parameter 2

! – Delimiter

Command Code| Function Description| Example| Feedback| Default Setting
Power|  |  |  |

s power z!

|

Power on/off the device,z=0~1 (z=0 power off, z=1 power on)

|

s power 1!

| Power on

System Initializing… Initialization Finished! FW version x.xx.xx

|

power on

r power!| Get current power state| r power!| power on/power off|

s reboot!

|

Reboot the device

|

s reboot!

| Reboot…

System Initializing… Initialization Finished! FW version x.xx.xx

|
System Setup|  |  |  |
help!| List all commands| help!|  |
r type!| Get device model| r type!| HDP-MXB1616|
Command Code| Function Description| Example| Feedback| Default Setting
---|---|---|---|---

r status!

|

Get device current status

|

r status!

| Get the unit all status: power, beep, lock, in/ out connection, video/ audio crosspoint, edid, scaler, network status|
r fw version!| Get Firmware version| r fw version!| MCU BOOT: Vx.xx.xx MCU APP: Vx.xx.xx WEB GUI: Vx.xx|
r link in x!| Get the connection status of the

x input port，x=0~16(0=all)

| r link in 1!| hdmi input 1: connect|
r link out y!| Get the connection status of the y output port，y=0~16(0=all)| r link out 1!| hdmi output 1: connect|

s reset!

|

Reset to factory defaults

|

s reset!

| Reset to factory defaults System Initializing…

Initialization Finished! FW version x.xx.xx

|
s beep z!| Enable/Disable buzzer function,

z=0~1(z=0 beep off, z=1 beep on)

| s beep 1!| beep on

beep off

| beep on
r beep!| Get buzzer state| r beep!| beep on / beep off|
s lock z!| Lock/Unlock front panel button, z=0~1(z=0 lock off,z=1 lock on)| s lock 1!| panel button lock on panel button lock off| panel button lock off
r lock!| Get panel button lock state| r lock!| panel button lock on/off|

s lcd on time z!

| Set LCD screen remain on time, z=0~4(0:off, 1:always on, 2:15s, 3:30s, 4:60s)|

s lcd on time 1!

|

lcd on 15 seconds

| lcd on 30 seconds
r lcd mode!| Get the backlight status of lcd screen| r lcd mode!| lcd always on|

s save preset z!

| Save switch state between all output port and the input port to

preset z, z=1~8

|

s save preset 1!

| save to preset 1|
s recall preset z!| Call saved preset z scenarios, z=1~8| s recall preset 1!| recall from preset 1|
s clear preset z!| Clear stored preset z scenarios, z=1~8| s clear preset 1!| clear preset 1|
r preset z!| Get preset z information, z=1~8| r preset 1!| video/audio crosspoint|
Output Setting|  |  |  |
s in x av out y!| Set input x to output y， x=1~16, y=0~16(0=all)| s in 1 av out 2!| input 1 -> output 2| PTP

r av out y!

|

Get output y signal status y=0~16(0=all)

|

r av out 0!

| input 1 -> output 1

input 2 -> output 2

……

input 16 -> output 16

|

s hdmi y stream z!

|

Set output y stream on/off, y=0~16(0=all) z=0~1(0:disable,1:enable)

|

s hdmi 1 stream 1!

s hdmi 0 stream 1!

| Enable hdmi output 1 stream

Disable hdmi output 1 stream

Enable hdmi all outputs stream

Disable hdmi all outputs stream

|

enable

r hdmi y stream!| Get output y stream status,

y=0~16(0=all)

| r hdmi 1 stream!| Enable hdmi output 1

stream

|

s hdmi y scaler z!

| Set hdmi output y port output scaler mode，y=0~16 (0=all), z=1~3(1=bypass, 2=4k->1080p,

3=Auto)

|

s hdmi 1 scaler 1!

s hdmi 0 scaler 1!

| hdmi output 1 set to bypass mode

hdmi all outputs set to bypass mode

|

hdmi all outputs set to bypass mode

Command Code| Function Description| Example| Feedback| Default Setting
---|---|---|---|---
r hdmi y scaler!| Get hdmi output y port output mode y=0~16(0=all)| r hdmi 1 scaler !| hdmi output 1 set to bypass mode|
EDID Setting|  |  |  |

s edid in x from z!

| Set input x EDID from default EDID z,

x=0~16 (0=all),z=1~39

1, 1080p,Stereo Audio 2.0

2, 1080p,Dolby/DTS 5.1

3, 1080p,HD Audio 7.1

4, 1080i,Stereo Audio 2.0

5, 1080i,Dolby/DTS 5.1

6, 1080i,HD Audio 7.1

7, 3D,Stereo Audio 2.0

8, 3D,Dolby/DTS 5.1

9, 3D,HD Audio 7.1

10, 4K2K30_444,Stereo Audio 2.0

11, 4K2K30_444,Dolby/DTS 5.1

12, 4K2K30_444,HD Audio 7.1

13, 4K2K60_420,Stereo Audio 2.0

14, 4K2K60_420,Dolby/DTS 5.1

15, 4K2K60_420,HD Audio 7.1

16, 4K2K60_444,Stereo Audio 2.0

17, 4K2K60_444,Dolby/DTS 5.1

18, 4K2K60_444,HD Audio 7.1

19, 4K2K60_444,Stereo Audio 2.0 HDR

20, 4K2K60_444,Dolby/DTS 5.1 HDR

21, 4K2K60_444,HD Audio 7.1 HDR

22, USER1

23, USER2

24, copy from hdmi output 1

25, copy from hdmi output 2

26, copy from hdmi output 3

27, copy from hdmi output 4

28, copy from hdmi output 5

29, copy from hdmi output 6

30, copy from hdmi output 7

31, copy from hdmi output 8

32, copy from hdmi output 9

33, copy from hdmi output 10

34, copy from hdmi output 11

35, copy from hdmi output 12

36, copy from hdmi output 13

37, copy from hdmi output 14

38, copy from hdmi output 15

39, copy from hdmi output 16

|

s edid in 1 from 1!

s edid in 0 from 1!

|

input 1 EDID:1080p,

|

1080p,Stereo Audio 2.0

Stereo Audio 2.0

all inputs EDID:1080p, Stereo Audio 2.0

r edid in x!

|

Get EDID status of the input x， x=0~16(0=all input)

|

r edid in 0!

| input 1 EDID: 4K2K60_444,

Stereo Audio 2.0

input 2 EDID: 4K2K60_444,

Stereo Audio 2.0

input 3 EDID: 4K2K60_444,

Stereo Audio 2.0

input 4 EDID: 4K2K60_444,

Stereo Audio 2.0

|
r edid data hdmi y!| Get the EDID data of the hdmi

output y port，y=1~16

| r edid data hdmi 1!| EDID: 00 FF FF FF FF

FF FF 00 ………

|
Audio Setting|  |  |  |

s hdmi y arc z!

|

Turn on/off ARC of HDMI output y, y=0~16(0=all)

z=0~1(z=0,off,z=1 on)

|

s hdmi 1 arc 1!

s hdmi 0 arc 1!

| hdmi output 1 arc on hdmi output 1 arc off

hdmi all outputs arc on hdmi all outputs arc off

|
r hdmi y arc!| Get the ARC state of HDMI output

y，y=0~16(0=all)

| r hdmi 1 arc!| hdmi output 1 arc on| off
Command Code| Function Description| Example| Feedback| Default Setting
---|---|---|---|---
CEC Setting|  |  |  |
s cec in x on!| set input x power on by CEC, x=0~16(0=all input)| s cec in 1 on!| input 1 power on|
s cec in x off!| set input x power off by CEC, x=0~16(0=all input)| s cec in 1 off!| input 1 power off|
s cec in x menu!| set input x open menu by CEC, x=0~16(0=all input)| s cec in 1 menu!| input 1 open menu|
s cec in x back!| set input x back operation by CEC, x=0~16(0=all input)| s cec in 1 back!| input 1 back operation|
s cec in x up!| set input x menu up operation by CEC, x=0~16(0=all input)| s cec in 1 up!| input 1 menu up operation|
s cec in x down!| set input x menu down operation by CEC, x=0~16(0=all input)| s cec in 1 down!| input 1 menu down operation|
s cec in x left!| set input x menu left operation by CEC, x=0~16(0=all input)| s cec in 1 left!| input 1 menu left operation|
s cec in x right!| set input x menu right operation by CEC, x=0~16(0=all input)| s cec in 1 right!| input 1 menu right operation|
s cec in x enter!| set input x menu enter by CEC, x=0~16(0=all input)| s cec in 1 enter!| iInput 1 menu enter operation|
s cec in x play!| set input x play by CEC, x=0~16(0=all input)| s cec in 1 play!| input 1 play operation|
s cec in x pause!| set input x pause by CEC, x=0~16(0=all input)| s cec in 1 pause!| iInput 1 pause operation|
s cec in x stop!| set input x stop by CEC, x=0~16(0=all input)| s cec in 1 stop!| input 1 stop operation|
s cec in x rew!| set input x rewind by CEC, x=0~16(0=all input)| s cec in 1 rew!| input 1 rewind operation|
s cec in x mute!| set input x volume mute by CEC, x=0~16(0=all input)| s cec in 1 mute!| input 1 volume mute|
s cec in x vol-!| set input x volume down by CEC, x=0~16(0=all input)| s cec in 1 vol-!| input 1 volume down|
s cec in x vol+!| set input x volume up by CEC, x=0~16(0=all input)| s cec in 1 vol+!| input 1 volume up|
s cec in x ff!| set input x fast forward by CEC, x=0~16(0=all input)| s cec in 1 ff!| input 1 fast forward operation|
s cec in x previous!| set input x previous by CEC, x=0~16(0=all input)| s cec in 1 previous!| input 1 previous operation|
s cec in x next!| set input x next by CEC, x=0~16(0=all input)| s cec in 1 next!| input 1 next operation|
s cec hdmi out y on!| set hdmi output y power on by CEC, y=0~16(0=all output)| s cec hdmi out 1 on!| hdmi output 1 power on|
s cec hdmi out y off| set hdmi output y power off by CEC, y=0~16(0=all output)| s cec hdmi out 1 on!| hdmi output 1 power off|
s cec hdmi out y mute!| set hdmi output y volume mute by CEC, y=0~16(0=all output)| s cec hdmi out 1 mute!| hdmi output 1 volume mute|
s cec hdmi out yvol-!| set hdmi output y volume down by CEC, y=0~16(0=all output)| s cec hdmi out 1vol-!| hdmi output 1 volume down|
s cec hdmi out y vol+!| set hdmi output y volume up by CEC, y=0~16(0=all output)| s cec hdmi out 1 vol+!| hdmi output 1 volume up|
s cec hdmi out y active!| set hdmi output y active source by CEC, y=0~16(0=all output)| s cec hdmi out 1 active!| hdmi output 1 active source|
Command Code| Function Description| Example| Feedback| Default Setting
---|---|---|---|---
Network Setting|  |  |  |

r ipconfig!

|

Get the Current IP Configuration

|

r ipconfig!

| IP Mode: Static

IP: 192.168.1.72

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1 TCP/IP port=8000 Telnet port=10

Mac address: 00:1C:91:03:80:01

|
r mac addr!| Get network MAC address| r mac addr!| Mac address:

00:1C:91:03:80:01

|

s ip mode z!

| Set network IP mode to static IP or DHCP,

z=0~1 (z=0 Static, z=1 DHCP )

|

s ip mode 0!

| Set IP mode:Static

(Please use “s net reboot!” command or repower device to apply new config!)

|
r ip mode!| Get network IP mode| r ip mode!| IP Mode: Static|

s ip addr xxx.xxx.xxx.xxx!

|

Set network IP address

|

s ip addr 192.168.1.100!

| Set IP address:

192.168.1.100 (Please

use “s net reboot!” command or repower device to apply new config!)

DHCP on, Device can’t config static address, set DHCP off first.

|
r ip addr!| Get network IP address| r ip addr!| IP address:

192.168.1.100

|

s subnet xxx.xxx.xxx.xxx!

|

Set network subnet mask

|

s subnet 255.255.255.0!

| Set subnet Mask: 255.255.255.0

(Please use “s net reboot!” command or repower device to apply new config!)

DHCP on, Device can’t config subnet mask, set DHCP off first.

|
r subnet!| Get network subnet mask| r subnet!| Subnet Mask:

255.255.255.0

|

s gateway xxx.xxx.xxx.xxx!

|

Set network gateway

|

s gateway 192.168.1.1!

| Set gateway:

192.168.1.1

Please use “s net reboot!” command or repower device to apply new config!

DHCP on, Device can’t config gateway, set DHCP off first.

|
r gateway!| Get network gateway| r gateway!| Gateway:192.168.1.1|
s tcp/ip port x!| Set network TCP/IP port (x=1~65535)| s tcp/ip port 8000!| Set TCP/IP port:8000|
r tcp/ip port!| Get network TCP/IP port| r tcp/ip port!| TCP/IP port:8000|
s telnet port x!| Set network telnet port (x=1~65535)| s telnet port 23!| Set Telnet port:23|
r telnet port!| Get network telnet port| r telnet port!| Telnet port:23|
Command Code| Function Description| Example| Feedback| Default Setting
---|---|---|---|---

s net reboot!

|

Reboot network modules

|

s network reboot!

| Network reboot…|
IP Mode: Static
IP: 192.168.1.72
Subnet Mask:
255.255.255.0

Gateway: 192.168.1.1

TCP/IP port=8000
Telnet port=10
Mac address:
00:1C:91:03:80:01

Application Example

Tech Support

Before contacting tech support, we may have answered your question already! Visit our BZBGEAR support page (bzbgear.com/support) for valuable information on our products.
Here you will find our Knowledge Base (bzbgear.com/knowledge-base) consisting of tutorials, quick start guides, and step-by-step troubleshooting instructions. Also visit our YouTube channel BZB TV
(youtube.com/c/BZBTVchannel) for help setting up, connecting, and other how-to videos regarding our products.
If you still need help, please call 1.888.499.9906, email support@bzbgear.com, or chat at bzbgear.com.

Warranty

BZBGEAR Pro AV products and Cameras come with a three-year warranty. An extended two-year warranty is available for our Cameras upon registration for a total of five years.
For an extended two-year warranty on our Cameras, follow these steps:

1.   Register your Camera within 90 days of purchase by visitingbzbgear.com/warranty.
2. Complete the registration form. Provide all necessary proof of purchase details, including serial number and a copy of your sales receipt.

For complete warranty information, please visit bzbgear.com/warranty or scan the QR code.

Mission Statement
BZBGEAR manifests from the competitive nature of the audiovisual and live streaming industry to innovate while keeping the customer in mind. AV solutions can cost a pretty penny, and new technology only adds to it. We believe everyone deserves to see, hear, and feel the advancements made in today’s AV world without having to break the bank. BZBGEAR is your answer for applications requiring the latest pro AV and live streaming solutions.
You’ll notice comparably lower prices with BZBGEAR while the performance and quality are on par with the top brands in the industry. Our team offers system design consultation and expert tech support seven days a week for all BZBGEAR products. Our unparalleled support is our way of showing we care for every one of our customers. Whether you’re an integrator, home theater enthusiast, or a do-it-yourselfer, BZBGEAR offers solutions allowing you to focus on your project and not your budget.

References

• BZBGEAR - Award-Winning Audio/Video & Live Streaming Solutions
• Knowledge base Archive | Bzbgear
• Technical Support & Resources | Bzbgear
• Warranty / Return Policy | Bzbgear

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>