KAMN133EMCA 13.3 Pro FHD Ips USB C Extended Monitor Instruction Manual
- June 17, 2024
- KAMN
Table of Contents
USER GUIDE 13.3″ PRO FHD IPS USB-C
EXTENDED MONITOR
KAMNI33EMCA
SAFETY & WARNINGS
- Read all instructions in this user guide carefully and retain this user guide for future reference.
- Remove the protective film from the monitor screen before use.
- This monitor requires an AC/DC power adapter (not provided). Keep the power adapter and the monitor away from sources of heat and place them in a well-ventilated place.
- The electrical outlet must be grounded. If you have any questions about grounding, please direct them to a qualified electrician.
- The DC power input required by this monitor is 5V-20V/+ 2V and its normal working power’s 24W.
- Do not expose the monitor to excessive humidity and dust as going so can cause corrosion.
- Do not pinch or squeeze the monitor screen.
- Do not touch the monitor screen with sharp abject.
- This monitor s suitable for general commercial use and household use.
- The optimal operating environment temperature for this monitor is -20-60°C.
- Disconnect the monitor from the power when not in use.
- The maximum folding angle of this monitor is 270, Do not exceed the maximum folding angle.
COMPONENTS
- Monitor
- Monitor case
- USB-C cable (x2)
- HDMlI cable
- USB-C to USB-A cable
OVERVIEW
- Screen holder extension button
- Down () button
- Up (+) button
- Power button
- HDMI port
- Indicator
- USB-C port
Note:
The indicator will illuminate red when the monitor is powered on, and blue
when it is connected to a device.
INSTALLATION
Open and close the monitor
Monitor configurations
Extend the screen holder
Press and hold the screen extension button to extend and contract the screen
holder.
Note:
The screer holder extends with force. Hold the screen holder when extending
and press the screen extension button slowly.
Using the kick stand
- Remove the kick stand from the back of the screen holder.
- Extend the kick stand to the desired length.
- Pull the adjustment knob out and twist left or right to lock the kick stand into position.
CONNECTIVITY
Notes:
- Ensure the USB-C port of your laptop is a full-functioning USB-C port (supports both video & data transmission).
- Ensure 5V/2A or above power can be supported through the USB-C port. An external power supply of 5V/2A or above is needed.
Laptop or mobile phone (via USB-C)
Connect the monitor to a compatible laptop or mobile phone using the supplied
USB-C cable. The laptop or mobile phone will provide power and signal to the
monitor.
Computer (via HDMI and power adapter)
- Connect one end of the provided USB-C cable to a power adapter (not provided) and plug the power adapter into an electrical outlet.
- Connect the other end of the USB-C cable to one of the USB-C ports on the monitor.
- Connect one end of the provided HDMI cable to the computer and the other end to the HDMI port on the monitor.
Other devices (via USB-C and power adapter)
- Connect one end of one of the provided USB-C cables to a power adapter (not provided) and plug the power adapter into an electrical outlet.
- Connect the other end of the USB-C cable to one of the USB-C ports on the monitor.
- Connect one end of the other provided USB-cable to the device and the other end to the other USB-C port on the monitor.
FUNCTIONS
Display settings
‘Windows 11:
- Goto your Display Settings (Start Settings > System > Display).
- Click and drag the screens into the correct position and click ‘Apply’.
- Adjust the display settings including ‘Brightness’, ‘Scale’, ‘Display resolution’ and “Display orientation’.
‘Windows 10:
- Settings > System > Display).
- Go to your Display Settings (Start
- Click and drag the screens into the correct position.
- Adjust the ‘Brightness and color’ of the screen.
- Adjust the ‘Scaling and layout’, ‘Display resolutior?’, ‘Display direction’ and ‘Multi- monitor settings’.
MacOS Monterey:
- Goto System Preferences Displays.
- Click and drag the screens into the correct position.
- To mirror displays, hold the ‘Option’ button and drag the screens on top of each other.
- To relocate the menu bar, drag it to a different screen.
- Click ‘Display Settings’ to adjust other settings.
MacOs:
- Go to Settings Display
- Adjust monitor settings in the ‘Monitor’ tab.
- In the ‘Arrange’ tab, click and drag the screens into the correct position.
- Adjust the monitor brightness in the ‘Color” tab.
Button Functions
Button | Function |
---|---|
Power | •Press and hold to power the monitor ontoff. |
•Press to open the OSD menu.
•Press to enter sub-menus.
•Press to confirm the selection.
•Press and hold to return to the main menu.
Up| •Press to increase the brightness.
•Press to adjust OSD parameters.
Down| •Press to decrease the brightness.
•Press to adjust OSD parameters.
Note:
If there is no user input for 10 seconds, the OSD will close.
SPECIFICATIONS
Weight | 1160g |
---|---|
Screen scale | 16:09 |
Size | 341x 217 x 40mm |
Refreshrate | 60Hz |
Resolution | 1920x1080P |
Contrast | 1000:01:00 |
Screen size | 13.3 |
USB-C power input | 5-20V//5A MAX |
USB-C power output | 5-20V/4.25A MAX |
Product interface | USB-C x2 + HDMI |
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require,
head online to help.kogan.com
kogan.com