Plastica SSW WHS 3 Safe System of Work Harness Instruction Manual
- June 15, 2024
- Plastica
Table of Contents
Plastica SSW WHS 3 Safe System of Work Harness
Product Information
Specifications:
- Name: [Product Name]
Product Usage Instructions
Visual Check of the Harness
Before using the harness, it is important to visually inspect it for any
signs of damage or wear. Follow these steps:
- Check the components that are attached to the harness, such as harness connectors, and ensure they are securely fastened.
- Inspect the straps and stitch threads for any signs of abrasion, fraying, burns, or cuts. If any damage is found, do not use the harness and replace it with a new one.
- Examine the adjusting device and loops for any signs of corrosion or deformation. Ensure they are functioning correctly.
User Physical Assessment
Prior to using the harness, it is essential for the user to assess their
physical condition and determine if they are fit for use. Individuals with any
health concerns should consult a medical professional before using the
harness.
Checking the Worksite
Before starting work, it is important to ensure the worksite is safe.
Follow these steps:
- Check the open space under the worksite to ensure there is no risk of collision with the ground or obstacles on the fall path.
- Ensure the anchorage point, where the harness will be connected, is secure and can support the user’s weight.
Fitment Instructions
Proper fitment of the harness is crucial for safety. Follow these
instructions:
- Refer to the provided fitment instructions to correctly put on the harness.
- Adjust the straps to ensure a snug fit without causing discomfort or restricting movement.
Usage Restrictions
To ensure the longevity and effectiveness of the harness, follow these
usage restrictions:
- Avoid using the harness near sharp edges, rough surfaces, or chemical substances that may cause damage.
- Do not modify the harness in any way without written approval from the manufacturer.
- Use the harness solely for protection against falls from heights and refrain from using it for any other purpose.
FAQ (Frequently Asked Questions)
- Q: What should I do if I have any doubts about the harness?
A: If you have any doubts about the safety or condition of the harness, immediately remove it from circulation and report the issue to your Team Leader or Supervisor.
Safe System of Work
OPERATING AND SAFETY INSTRUCTIONS FOR HARNESS
- Name: …………………………………………….………….
- Training Date:…..…………………………
| Instruction| Understands or
---|---|---
1| Explain how to do a visual check of the harness before use|
2| Check the components that are attached (harness connectors)|
3| Check straps and stitch threads – must not show any signs of abrasion,
fraying, burns or cuts|
4| Check the adjusting device and loops – must not show any signs of corrosion
or deformation and should operate correctly.|
5| Maximum load 2243kgs – do not use if load exceeds this|
6| Explain that the user must be in good physical and
psychological health when using the equipment – user must decide on use based on their own personal assessment
|
7| DO make sure you check the open space under the worksite to ensure that
there is no risk of collision with the ground or obstacles on the fall path.|
8| DO make sure the anchorage point is secure|
9| DO follow fitment instructions|
10| DON’T use by sharp edges or rough surfaces or chemical substances|
11| DON’T modify the harness without written approval|
12| DON’T use the harness for any purpose other than protection against fall
from heights|
13| Show WHS 3.1 attachment – Harness can be worn by following these simple 6
steps|
14| If in any doubt about the harness, remove from circulation and report to
your Team Leader or Supervisor immediately|
Instructions
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.
- Name: ………………………………………………………………………………………………………….
- Signed: ………………………………………………………………..
- Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they require further training. I authorise this person to use the machinery detailed above.
- Name: …………………………………………………………………….……………(Authorised Trainer)
- Signed ……………………………………………………………………
- Date: ……………………………
SSW WHS 3 – 17/03/16
Documents / Resources
|
Plastica SSW WHS 3 Safe System of Work
Harness
[pdf] Instruction Manual
SSW WHS 3, SSW WHS 3 Safe System of Work Harness, Safe System of Work Harness,
System of Work Harness, Work Harness, Harness
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>