nous L13Z Smart ZigBee Switch Module Instruction Manual
- June 15, 2024
- NOUS
Table of Contents
nous L13Z Smart ZigBee Switch Module
You will need Nous Smart Home App. Scan the QR code or download it from direct link
- and you will need Nous E1 or other Tuya-compatible ZigBee Gateway/Hub
Checklist before using the device
- Your smartphone or tablet is connected to WiFi with the internet.
- You have the correct WiFi PWD
- Your smartphone or tablet must have access to the App Store and Google Play.
- Your router is MAC-open
User Guide
- Start with the “Nous Smart Home” APP.
- Register a Nous Smart Home If you have a Nous Smart Home just log in. Open the Nous Smart Home app, on the smart gateway homepage (your ZigBee Hub has to be connected to the app already), Click: Zigbee Smart Gateway
- Press + and Add device
- Power on ON/OFF operating principle: The connected appliances work/stop throught live wire power on/off.
Note: The ZigBee Switch must be powered up by N and L wires
- Press the reset button for 5 seconds, till the blue LED blink, then click “LED already blink” on the app.
- Waiting for a few seconds,you can see that this device is shown and you may rename it.
How to connect your device with Alexa
- You have to have the Alexa app on your smartphone
- Go to settings and press “Skill and Games”
- Search for the Nous Smart Home skill
- Enable it
- Link you Nous account with Alexa
- Ask Alexa to discover new devices
How to connect your device with Google Home
- You have to have the Google Home app on your smartphone
- Go the the home settings and press “works with Google”
- Search for the Nous Smart Home
- Link the account with the Google Home
- All devices from the Nous Smart app will appear in Google Home after synchronization
Troubleshooting
Q1: How to set the indicator light as rapid flashing?
- Power on the device. Power off after 10s and then power on.
- Hold the reset button for 5s.
- Confirm indicator light is now rapidly flashing
Q2: How to set the indicator light as slow flashing?
- Power on the device. Power off after 10s and then power on.
- Hold the reset button for 5s
- Confirm indicator light is now rapidly flashing.
- Hold the reset button for 5s until the indicator light is slowly flashing.
The newly added device needs 1 minute to connect to networks and the internet if it stays offline for a long time please judge the problem by the network’s LED status. Тetworks LED quickly blinks one time every second;
- This translation may be inaccurate because it was made with Google Translate service
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>