ROSSO 240V Induction Hob Instruction Manual

ROSSO 240V Induction Hob

PRODUCT INFORMATION

Specifications:

• Model: ROSSO 60
• Type: Induction Hob
• Power Supply: 220-240V, 50Hz
• Power Consumption: 2000W
• Dimensions (W x D x H): 600mm x 520mm x 50mm
• Weight: 10kg

Product Usage Instructions:

Installation:
Before proceeding with the installation of the ROSSO 60 Induction Hob, please make sure to read and understand the entire user manual.

• Ensure that the power supply is turned off before starting the installation process.
• Place the induction hob on a flat, stable, and heat-resistant surface. The surface should be capable of supporting the weight of the hob.
• Connect the induction hob to a suitable power outlet using the provided power cord.
• Make sure all electrical connections are secure and properly insulated.
• Once the installation is complete, you can proceed with the usage instructions.

Usage:

Preparing for Use:

• Ensure that the induction hob is properly installed and connected to a power source.
• Use only induction-compatible pots and pans on the hob. Ensure that the bottom of the cookware is flat and clean.
• Clean any moisture or liquid spills from the hob’s surface before use.

Operating the Induction Hob:

• Turn on the power supply.
• Select the desired cooking zone by pressing the corresponding zone button on the hob.
• Place the induction-compatible cookware on the selected cooking zone.
• Press down on the knob of the selected cooking zone to activate it.
• Adjust the heat level using the control knob. Turn it clockwise to increase the heat and counterclockwise to decrease it.
• To switch off a cooking zone, press the corresponding zone button and turn the control knob to the “Off” position.

Maintenance and Safety:

• Clean the induction hob regularly with a soft, damp cloth and mild detergent. Do not use abrasive cleaners or scouring pads.
• Avoid placing hot pans or pots directly onto the control panel to prevent damage.
• Disconnect the power supply and allow the hob to cool down before cleaning or performing any maintenance tasks.
• Do not attempt to repair or disassemble the induction hob yourself. Contact a qualified technician for assistance.

Frequently Asked Questions (FAQ):

• Q1: Can I use metal utensils with the ROSSO 60 Induction Hob?
  A1: No, it is not recommended to use metal utensils with this induction hob as they can cause damage to the hob’s surface. It is advised to use plastic or wooden utensils instead.

• Q2: Can I move pots or pans while using the induction hob?
  A2: No, it is not recommended to move pots or pans while the induction hob is in use. This can cause spills and may lead to accidents. Always handle hot cookware with caution.

INSTALLATION

• After unpacking tip FX0duct, check for any change during transport. In case of problems cmtæt the dealer or the After-Sales Service

• For built-in dimensions and installation, instruction see in below figures

• The distance between the underside of the appliance and the separator panel must respect the dimensions given in the figure (min. 50mm).

• To ensure the correct operation of the product, cb not obstruct the minimum required clearance (min. 20 mm) on the worktop for airflow out.

• If an unclutch wen is installed, make the oven equipped with a cooling system.

• Do not install the hob abwe a or so that the electronic circuits do not come into contact with steam or nurture which could damage them.

Wiring Guide

Note:

• Hob blue and white connect in the box on the blue clamp.
• Black on L1, brown on L2. blue and white do not disconnect!
• If you are not sure, please contact customer service.

DO’S:

• USE INDUCTION POTS AND PANS
• USE PLASTIC OR WOODEN UTENSILS
• CLICK DOWN KNOB BEFORE USE
• CLEAN MOISTURE FROM TOP

DON’TS:

• USE METAL UTENSILS
• MOVE POTS OR PANS WHILE USING HOB

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>