Ailofy AIBC-A Smart Light Color Changing Bulbs User Guide
- June 15, 2024
- Ailofy
Table of Contents
Ailofy AIBC-A Smart Light Color Changing Bulbs
Specification
- Model: AIBC-A
- Base type: E26
- Rated power: 9 Watts
- Size: 60x60x113mm
- Lumens: 800 Lumens
- Color render index(Ra): 90+
- Color temperature: 1800K – 6500K
- Working voltage: 120V~60Hz
- Life expectancy: 25,000 Hours
- Compatibility: Android 8.0+, iOS 12.0+
- Communication mode: 802.11 b/g/n, 2.4 GHz, Bluetooth
Getting Started
- Download the Ailofy app from your app store and sign up for a new account.
- Follow the instructions in the Ailofy app to set up.
- Open the Ailofy app and tap the + sign on the top right corner of the My Home tab. Tap Add Device and then select Ailofy bulb color.
Status Explanation
Flashing: the brightness is bright to dark on a cycle.
- If you need to reset the device, turn it on and off three times until the bulb flashes green.
- If you have multiple Ailofy bulb colors, you can choose to network all the bulbs together.
- When multiple light bulbs are successfully networked, each bulb will display a different color.
- When the bulb fails to connect to the network, it will switch from a constant color to green breathing. At this moment, it is still in pairing mode, and you can attempt to reconnect the network.
Connecting To Your Voice Assistant
Alexa
- Open the Ailofy App, enter your Open the Ailofy App, enter your Account set-tings, tap Smart Integrations.
- Tap Alexa to bind your Ailofy account.
- When binding successfully, you can control your Ailofy lights via Alexa.
Google Home
- Open the Googe Home App, and log in to your account.
- Tap Set up device.
- Tap Works with Google.
- Search the Ailofy device listing and log in with our Ailofy account.
- Wait a few more seconds, and you’re done.
Precautions
- Make sure that the power is off when installing or removing the light bulb.
- Do not use this product with a dimmer (e.g. desk lamp with a dimmer switch) to avoid damaging the product.
- Risk of electric shock – Do not use when directly exposed to water.
- Do not use in a narrow or poorly ventilated light fixture.
- Not for use in totally enclosed luminaires.
- Not for emergency lighting.
FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complieswith Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radiocommunications- tions. However, there is no guarantee that interference will not occur in a particular in- stallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference- ence by one of the following measures:
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
NEED HELP?
- Service Email: [email protected]
- Service URL: www.ailofy.com