Ailofy AIBC-A Smart Light Bulbs User Guide
- June 14, 2024
- Ailofy
Table of Contents
**Ailofy AIBC-A Smart Light Bulbs User Guide
**
Ailofy Bulb Color
Specification
- Model: AIBC-A
- Base type: E26
- Rated power: 9 Watts
- Size: 60x60x113mm
- Lumens: 800 Lumens
- Color render index(Ra): 90+
- Color temperature: 1800K – 6500K
- Working voltage: 120V~60Hz
- Life expectancy: 25,000 Hours
- Compatibility: Android 8.0+, iOS 12.0+
- Communication mode: 802.11 b/g/n, 2.4 GHz, Bluetooth
Getting Started
Download the Ailofy app from your app store and sign up for a new account
Follow the instructions in the Ailofy app to set up.
Open the Ailofy app and tap the + sign on the top right corner of the My Home tab. Tap Add Device and then select Ailofy bulb color.
Status Explanation
| Light | Status |
|---|---|
| Flashing Green | In pairing mode |
| Solid Color | Pairing successful |
*Flashing:the brightness is bright to dark on a cycle.
-
If you need to reset the device, turn it on and off three times until the bulb flashing green.
-
If you have multiple Ailofy bulb colors, you can choose to network all the bulbs together.
-
When multiple light bulbs are successfully networked, each bulb will display a different color.
-
When the bulb fails to connect to the network, it will switch from a constant color to green breathing. At this moment, it is still in pairing mode, and you can attempt to reconnect the network.
Connecting To Your Voice Assistant
Alexa
- Open the Ailofy App, enter your Open the Ailofy App, enter your Account settings, tap Smart Integrations.
- Tap Alexa to bind your Ailofy account.
- When binding successfully, you can control your Ailofy lights via Alexa.
Google Home
- Open the Googe Home App , log in your account.
- Tap Set up device.
- Tap Works with google.
- Search the Ailofy device listing and log in with our Ailofy account.
- Wait a few more seconds, and you’ re done.
Precautions
- Make sure that the power is off when installing or removing the light bulb.
- Do not use this product with a dimmer (e.g.a desk lamp with a dimmer switch) to avoid damaging the product.
- Risk of electric shock – Do not use where directly exposed to water.
- Do not use in a narrow or poorly ventilated light fixture.
- Not for use in totally enclosed luminaire.
- Not for emergency lighting
FCC Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation issubiect to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. These
equipment generates
uses and can radiateradio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radiocommunications. However, there is no guarantee that interference will not
occur in particular installation. lf this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures：
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on acircuit different from that to which receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
NEED HELP?
Service Email: support@ailofy.com
Service URL: www.ailofy.com