globe 50594 Tunable White Frosted LED Light Bulb User Guide

globe 50594 Tunable White Frosted LED Light Bulb

Thank you for selecting Globe as your smart home solution. With proper care, this product will provide years of pleasure and enrolment.

LIMITED WARRANTY

This bulb is warranted to last 3 years from the date of purchase based on the use of 3 hours per day. If it fails before that time, we will replace it. Send Globe Electric the bulb, bout or purchase, and register the receipt dong with your complete name address, and caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded.

CAUTION
DO NOT USE WITH STANDARD DIMMER. Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control. The bulb can be switched to different operating modes and is dimmable through the Amazon Alexa app. For use only in 170V60H7 circuits, Risk or electrical shock. Do not open, no user-serviceable parts inside, This device is not intended for use with emergency exit fixtures or emergency exit lights, photocells to water. This device shall not be used in an enclosed/recessed/sealed fixture. Minimum operating temperature is -20°C (-4° F).

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This Class B digital apparatus complies with ICES-005(B).

WARNING

Changes or modifications to this unit not expressly approved by the responsible for compliance could void the user’s authority to operate the equ This equipment has been tested and found to comply with the limits for a Class B dig under Part 15 of the FCC Rules. These limits are designed to provide can radiate radio frequency energy and, if not installed and used instructions, may cause harmful interference to radio communication Guaranteed that interference will not occur in a particular installation cause harmful interference to radio or television reception, which can. the equipment and on, the user is encouraged to try to communicate coving separation between the equipment and receiver. Connect the equipment circuit different from that to which the receiver is connected Consult an experienced radio/TV technician for help.

RF EXPOSURE
The equipment complies with the FCC environment. This device should action exposure limit of 20cm between the radiator and your installed and open ur body. set forth for an uncontrolled with minimum distance.

USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Sanada license-t-exempt RSS standard(s). Operation is subject to the following (2) this device must have two conditions: (1) this device may not cause interference, and undesired operation any intercons
of the device. CAN Include interference that may cause 005 (B).

RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated at a minimum distance of 20cm or your body.

USE IN THIS DEVICE PORTABLE TABLE LAMP THAT IS PROVIDED WITH A SHADE É TABLE LAMPS IN WHICH THE DISTANCE FROM THE BOTTOM OF THE BASE TO THE AMP HOLDER DOES NOT EXCEED THREE SINIMES THE MINIMUM BASE DIAMETER NOT INTENDED FOR USE WITH EMERGENCY EXITS FCC RESPONSIBLE PARTY
Globe Electric
2264 East 6th Street
San Bernardino, CA 92410
www.globe-electric.com

Since 1932, Globe has taken pride in offering products of the highest quality, and a level of service unparalleled in the industry. Should you encounter any difficulties, have any questions, or simply wish to offer us your valuable feedback, you may contact us in the following ways: Toll-Free Telephone: 1-888-543-1388 (North America Only) / Toll-Free Fax: 1-800-668-4562

(North America Only)
E-Mail: info@globe-electric.com
Mail: Globe Electric Customer Service Department
150 Oneida, Montreal, Quebec, Canada H9R 1A8
Please visit our website to discover other quality Globe products: http://www .globe-electric.com

Warranty
This product comes with a 3-year product warranty effective from the date of purchase. If the failure of this product is caused by defects in the material or workmanship, it will be repaired or replaced at no charge to you. You must supply

ENERGY STAR
Return the product cash ur case receipt as proof or purchase prepaid to scribe Electric Company Inc. Globe reserves the right to repair or replace the product at its option Repair or replacement, as described above, shall be the sole remedy to the customer and their shall be no liability on the part of Globe for any special, indirect, incidental or consequential damages, including but not limited to any loss of business or profits, whether or not foreseable. Some jurisdictions may not allow the exclusion of incidental or codification dams produced to comp with fiery instructions will void Ane

FEATURES

• RGB: Choose from a full spectrum of colors
• Tunable white (2000 K – 5000 K): Choose from a focused bright white to a relaxed sunset glow
• Manually or remotely control your light with the Amazon Alexa app
• Pair with Amazon Echo to control your light through voice commands
• Set schedules and control your light from anywhere

SPECIFICATIONS

CONNECTING INSTRUCTIONS

1. Download the Amazon Alexa app.
2. Power on your device.
3. Ensure your light bulb is screwed in and powered on.
4. Scan barcode
5. Launch the Amazon Alexa app.
6. Select “Add a Device.”

Please keep these instructions in a safe place. This is the only duplicate of the unique QR code for your product. You may need it to reconnect the product to your account or transfer it to another account. The lint a ta notating he pain suest rides to one with a minute to not connect, turn the device OFF and ON again to re-enter pairing mode.

Don’t have a barcode?
Select “Don’t have a barcode?” in the Alexa app and follow the in-app instructions on how to connect without a 2D barcode.

How to factory reset the device
If you are struggling to set up your device, or if the device was already connected to a network, perform a factory reset by following the instructions below:

1. Turn the device ON for 5 seconds.
2. Turn OFF – wait 2 seconds – Turn ON (repeat 3 times)
3. Wait 5 seconds – the light will flash to indicate a successful reset
4. Scan the inner barcode (located in the instruction manual), and connect within 15 minutes. If you fail to connect within the 15-minute time frame, turn the device OFF and ON again once to re-enter pairing mode.
5. The light will flash WHITE to indicate that the pairing was successful.

Voice control with Alexa

• On/Off
• Dimming
• Shades of white
• Colors
• Moods

FUNCTIONALITY
Using the Amazon Alexa app on a mobile device With the Amazon Alexa app, you can easily manage your home setup and directly control your Globe Electric lights.

• On/Off
• Dimming
• Shades of white
• Colors
• Out of home (remote) control

Check out product videos on our YouTube channel, and on the Globe Smart Home – Amazon Certified for Humans playlist!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>