GOOVIS 3D HD Headsets LED Display Instruction Manual

GOOVIS 3D HD Headsets LED Display

Thanks for using the GOOVIS

To begin using the GOOVIS LITE as quickly as possible, please carefully read this GOOVIS LITE Quick Start Guide. All pictures here are for general reference only. All procedures should be based on the actual product received. Shenzhen NED Optics Co., Ltd. reserves the right of final interpretation.
©2021 Shenzhen NED Optics Co., Ltd. All rights reserved.

Getting to Know Your GOOVIS LITE

Headset Functions and User Interface

Fitting and Adjustment

1. Pull up the support of the headset gently to the position shown in the figure below.
2. Connect the ends on both sides of the head strap to the support shown in the figure below by sliding the ends of the straps in to the slots from below.

Headband connection method 1: side strap only

Headband connection method 2: side strap + top strap (optional)

External Device Connection

You can connect GOOVIS LITE via HDMI adapter cable and/or GOOVIS Cast to GOOVIS portable media player, mobile phones/tablets/laptops, desktop computers/drones/PS4, SWITCH, Xbox and  other game consoles/TV set-top-boxes, etc.,  which with HDMI video output device, and enjoy the wonderful vision of high-definition large screen. Please check our website for more detailed information. https://www.goovis.net

Performing Initial Vision Adjustment

The GOOVIS LITE accommodates a vision range from +2D hyperopia to -7D myopia, an IPD (interpupillary Distance) from 56mm to 72mm, and a separate adjustment of each of the left and right eyes. For easy vision adjustment, we suggest that, before putting on the headset, you can initially rotate the vision adjustment knob to a hyperopia/myopia scale that corresponds somewhat to your eyesight.
Mapping between the scales on the vision adjustment knob and the diopter
Astigmatic lenses are optional in case of need. If you are astigmatic, please contact us by sending your diopters and axis of astigmatism information to order the Lenses, check with our website: www.goovis.net

Wearing the GOOVIS LITE Headset
Adjust the length of the headband until the strap fits your head circumference so that you can easily put the headset on your head. Adjust the headset to the right height and angle so that you can comfortably watch the display window. You can also adjust the headset itself by tilting it slightly up or down.
Tip : Before putting on the headset, make sure that the lenses on the LITE display windows are clean.

Performing Accurate Visual Adjustment

When the headset sits comfortably on your head, rotate the diopter adjustment knobs to the clockwise or counterclockwise to bring the image into sharp focus. Please close your right eye when adjusting your left eye, and vice versa. It is suggested that, when adjusting the vision, you begin from the blurry state until the image is sharpest, without any overlaps or shadows in the field of view. After adjusting for sharpness in each eye separately, open both eyes, and move the knobs towards or away from the center to find the correct IPD for your viewing comfort.
Tip : It is very important for you to perform accurate visual adjustments before watching, otherwise you may feel dizzy or uncomfortable.

Performing Brightness Adjustment,3D/2D Mode Adjustment

• Brightness Adjustment : Seven different levels of brightness are available for gradual adjustment. Press the Brightness Adjustment plus button for 3 seconds long to turn off/on the status light.
• 3D/2D switch key : Tap the 3D/2D switch key to select the playback format consistent with the video you are watching.

Starting Your Visual Feast

Specifications

• Display: 2×0.49 inch AMOLED display
• Resolution: 1920×1080*2
• Optical modules: 14 optical lenses
• Virtual screen size: Equivalent to a giant 600-inch diagonal screen when viewed from a distance of 66 feet (20 meters)
• Distortion: < 1.5%
• FOV: 42°
• Diopter adjustment: Ranging from +2D hyperopia to -7D myopia; left/right eye adjusted independently
• Astigmatic lens: Optional
• IPD: 56mm ~ 72mm
• Sensor: Proximity sensor
• Audio interface: 3.5mm universal earphone
• Video interface: HDMI 1.4a
• Video format: Side-by-Side, 2D video
• Input support: 1080p@60Hz
• Headset main body dimensions: 7.3 inch x 4.3 inch x 2.2 inch (185mm x 109mm x 56mm)
• Headset main body weight: 7.05 oz (200g)

Safety Instructions

• Do not stretch or twist the HDMI cable because this may hurt the quality of signal transmission.
• Do not over rotate or press the head support, or it may be damaged.
• Do not stretch or twist the head strap.
• Do not block the air intake or outlet vents on the headset or the heat dissipation capabilities may be adversely affected.
• Carefully protect the lenses from dust or scratches. To clean the lenses, use a soft cleaning cloth and wipe them gently.
• Clean the surface with a soft cloth dipped in a mild detergent. Do not use solvents or alcohol products as these may damage the surface.
• Handle the headset with care for it contains precision optical modules that may be damaged by any accidental falls.
• Adjust the vision to the optimal state before watching your movies to avoid any discomfort.
• Do not over-rotate the viewing control knobs as it may cause them to be damaged.
• It is suggested that you rest regularly while using the device. Please stop immediately when you feel any discomfort such as eyestrain, fatigue, or nausea. You may resume use when the discomfort dissipates. Consult a doctor if
• the discomfort continues or is excessive.
• Watching video images or playing games using this device may affect the eyesight of growing children. It is suggested that children under 12 use the device under the careful  guidance of their parents.

Warning

• Do not use or store the device in humid environments. Any unauthorized disassembly or opening of the device is forbidden and voids any  warranty
• Do not dispose of the product with household garbage. Correct disposal of the device is conducive to protecting the environment and the human race from any adverse effect.
• Changes or modifications to this device not expressly approved by Shenzhen NED Optics Co., Ltd. could void the user’s authority to operate the device.

Warranty

Warranty Policy
In strict accordance with the Regulations, the GOOVIS is fully warrantied for repair, replacement or compensation for quality problems under the following condition: Within 12 months of purchase or receipt of the device, as verified by a receipt, if it has any verifiable quality problems that have been confirmed by the GOOVIS after-sales service center, you may have your device repaired or replaced without charge (except for shipping). The decision to replace or repair the device will be determined by the GOOVIS repair center depending upon the issue that is encountered.
The warranty policy as specified above does not apply to the after-sales service caused by the use for commercial purposes.

Voided Warranty Policy
The following actions will void the warranty:

1. Unauthorized repair, misuse, damage, negligence, abuse, accident, alteration, water immersion, improper use of the GOOVIS, destruction or obliteration of labels or false proof mark, etc.
2. Consumable items including the cushion and the lens cleaning cloth, are treated as being used upon unsealing of the product package.
3. Free gifts.
4. Use of parts unconfirmed by the manufacturer, and damage to the device caused by not following the operating instructions in its use, repair, maintenance, and transport or other accidents.
5. Damage that occurs outside of the warranty period.
6. Damage caused by force majeure.

Manufacturing Information

• Product : 3D Head-Mounted Display
• Model : HL01
• Product certification: ( € F@
• Manufacturer: Shenzhen NED Optics Co., Ltd.
• Web : www.goovis.net
• Email : [email protected]
• Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>