GOOVIS CPS10 Powerbank Base User Guide
- June 13, 2024
- GOOVIS
Table of Contents
GOOVIS CPS10 Powerbank Base
Thanks for using the GOOVIS Powerbank Base
To begin using the product as quickly as possible, please carefully read this Quick Start Guide. All pictures here are for general reference only. All procedures should be based on the actual product received. Shenzhen NED Optics Co., Ltd. reserves the right of fina interpretation.© 2022 Shenzhen NED Optics Co., Ltd. All rights reserved.
Instruction
The GOOVIS Powerbank Base is a portable mobile power supply that can provide
mobile power for GOOVIS specific functional accessories, such as: GOOVIS
Wireless Cast.The GOOVIS Powerbank Base has a built-in magnetic attraction
function, which supports quick placement of accessories such as GOOVIS
Wireless Cast on the GOOVIS Powerbank Base.
Product Information and Interfaces
Tip: The power output port is a customized POGO PIN interface, which can only be used for GOOVIS specific accessories (such as GOOVIS Wireless Cast).
Instructions for Use
Charge the GOOVIS Powerbank Base
Use the USB Type-C power cord to charge the GOOVIS Powerbank Base through the
power input port.When charging, the indicator light flashes; when the battery
is full, the indicator light stays on.
Note: When the Cast is not needed, it is recommended to charge the PowerBank Base separately.
The GOOVIS Powerbank Base supplies power to the device
-
Align the power port of the device that needs to be powered (such as the GOOVIS Wireless Cast) with the power output port with magnetic attraction function on the GOOVIS Powerbank Base.
Note: When the PowerBank Base and the Cast are attached together, please pay attention to check whether the PowerBank Base is in the off state after use. -
Short press the power switch on the GOOVIS Powerbank Base once, the indicator light of the mobile power base will stay on and start to supply power to the external device.
-
Quickly and shortly press the power switch of the GOOVIS Powerbank Base twice, the indicator light of the GOOVIS Powerbank Base is off, and the power supply to the external device is stopped.
Specifications
| Battery | 5900mAh polymer lithium battery |
|---|---|
| Power Input | 5V/2A |
| Power Output | 5V/2.4A |
| Working environment temperature | 0-40℃ |
| Product size | 119（L）x6（1 W ）x25（ H ）mm |
| Product weight | 135g |
Safety Instructions
- Do not use any unspecified power supply or cables as they may lead to malfunction or damage of the device.
- Do not attempt to replace the battery. The device should be periodically recharged if you do not use it for long periods of time.
- Clean the surface with a soft cloth dipped in a mild detergent. Do not use solvents products as these may damage the surface.
- Put the device in a safe place to keep it from falling or being immersed in water. Otherwise, it may not function properly.
Warning
- Do not use or store the device in humid environments. Do not expose the device to open flames or extreme heat environments.
- Any unauthorized disassembly or opening of the device, or changes or modifications to this device is forbidden and voids any warranty.
- Do not dispose of the device with the household garbage. Correct disposal of the device is conducive to protecting the environment and the human race from any adverse effect. The GOOVIS Powerbank Base contains a Lithium Polymer (LiPo) battery.
Manufacturing Information
- Product: Powerbank
- Base Model: PS10
- www.goovis.cn
- www.goovis.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>