Shenzhen M7 Multimedia Bluetooth Speaker Instruction Manual

Shenzhen M7 Multimedia Bluetooth Speaker

Product Information

Specifications:

• Input voltage: N/A
• Bluetooth version: 5.0
• Frequency response: N/A
• Rated power: N/A
• Product weight: N/A
• Battery capacity: N/A
• Product size: N/A

Features:

• Wireless 5.0
• Bass Boost
• Colorful Party Light
• TF Card & AUX Audio
• IP67 Waterproof

Package Content:

• 1*M7 Main device

• Strap hook

• Power: Long press Turn on/off, Short press Play/Pause

• Bluetooth/Phone:

  • Long press force to disconnect Bluetooth connection
  • Short press switch Bluetooth/Aux in mode Answer/Hang off phone call

• Plus: Short press to increase volume, Long press to next
  track

• Minus:

  • Short press to decrease volume
  • Long press to previous track

• BASS:

  • Long press turn on/off lights
  • Short press to turn BASS sound on/off

• TWS pairing:

  • Short press on/cancel TWS connection
  • Long press to clear away TWS pairing

• Bluetooth light / charging indicator

• Low power indicator

• Bass sound indicator

• TWS indicator

• Aux interface

• TF card slot

• Type-C charging interface

• 1* USB cable

• 1* 3.5mm Aux in cable

• 1* User Manual

Product Usage Instructions

Bluetooth Mode:

1. Turn on the speaker to enter into Bluetooth mode. The Bluetooth  light will start to flash.
2. Enable Bluetooth on your device and search for “M7” to connect  to your speaker.
3. If the connection is successful, you will hear a prompt tone and the Bluetooth light will stay on.
4. You can now play music on your device through the speaker via Bluetooth.

AUX in Mode:

To use the speaker in AUX mode, simply connect your device to the speaker using the included 3.5mm Aux in cable. The speaker will switch to AUX mode automatically.

TF Card Play:

To play music from a TF card, insert the TF card into the speaker. The speaker will switch to TF card mode automatically with a prompt tone. The speaker will then play the music saved on the card. Please note that the maximum TF card memory supported is 32GB.

TWS Stereo Sound Play:

1. Turn on two M7 speakers and enter into Bluetooth mode on both.
2. Short press the TWS pairing button on one speaker. The TWS light will start to flash.
3. The speaker will automatically search for the other speaker for TWS connection.
4. If the connection is successful, the two speakers will switch  into left and right channels automatically.
5. Repeat the Bluetooth connection operation and connect your phone. If the connection is successful, the music will play on the speakers in dual stereo sound effect.

Note : This function requires two M7 speakers. Make sure both are turned on and in Bluetooth mode. Do not connect any other devices via Bluetooth before TWS pairing. To cancel the interconnection, short press the TWS button on one speaker.

Cool Party Lights:

To turn on or off the party lights, switch on the speaker and  enter the light effect mode before shutting down. Long press the BASS key to turn the lights on or off. Short press to switch to BASS sound.

Type-C Quick Charge:

The speaker supports Type-C quick charging. Simply connect the Type-C charging cable to the charging interface of the speaker for quick charging.

Energy Saving:

The speaker has an energy-saving feature that automatically shuts it down to save power under the following circumstances:

• In Bluetooth mode, after 20 minutes of waiting for no device  pairing.
• In any mode, if there is no operation for 20 minutes after short pressing the power key, the speaker will shut down automatically. To turn it on again, please long press the power key.

FAQ

• Q: What is the maximum TF card memory supported by the speaker?
  A: The maximum TF card memory supported by the speaker is 32GB.

• Q: How many M7 speakers are required for TWS stereo sound  play?
  A: TWS stereo sound play requires two M7 speakers.

• Q: How do I cancel the interconnection between two TWS paired speakers?
  A: To cancel the interconnection, simply short press the TWS  button on one speaker.

FEATURES

• Wireless 5.0
• Bass Boost
• Colorful Party Light
• TF Card & AUX Audio
• IP67 Waterproof

PREFACE

Dear customers, please read this manual carefully before using the product and keep it properly.

PACKAGE CONTENT

• *1M7 Main device**

1. Strap hook
2. Power: Long press Turn on/off
  1. Short press Play/Pause
3. Bluetooth/Phone:
  1. Long press force to disconnect
4. Bluetooth connection
  1. Short press switch Bluetooth/Aux in mode
  2. Answer/Hang off phone call
  3. Plus: Short press to increase volume
  4. Long press to next track
5. Minus:
  1. Short press to decrease volume
  2. Long press to previous track
6. BASS:
  1. Long press turn on/off lights
  2. Short press to turn BASS sound  on / off
7. TWS pairing: Short press on/cancel TWS connection
  1. Long press to clear away TWS pairing
8. Bluetooth light/charging indicator /Low power indicator
9. Bass sound indicator
10. TWS indicator
11. Aux interface
12. TF card slot
13. Type-C charging interface

• 1* USB cable
• 1* 3.5mm Aux in cable
• 1* User Manual

OPERATION INSTRUCTION

Bluetooth mode

1. Turn on the speaker and enter into Bluetooth mode, the bluetooth light starts to flash. Turn on the Bluetooth on your device search for “M7” and connect to your speaker. If it’s connected successfully, you will hear a prompt tone that“device paired ”. The bluetooth light is always on, now you can play music on your device by Bluetooth.
2. When bluetooth is connected successfully and you make calls with your phone, the voice will automatically enter into the bluetooth hands-free mode. Short press “ ” key to answer the incoming call, and Long press to reject call

AUX in mode

Please connect one end of the 3.5mm audio cable to the headphone output port of the mobile phone/computer and the other end to the audio, the speaker will switch mode automatically with a prompt tone “AUX in mode”, then you can play music. ※Due to the lower power supply capability, most computers’ USB interfaces can not meet the speaker’s operational requirements.It is not recommended to use the computer’s USB for charging synchronously when you play music in the AUX in mode while connecting the computer

TF card play

Please insert TF card in the speaker, the speaker will switch mode automatically with a prompt tone “TF card mode”, and the speaker will play music saved in card automatically, TF card memory maximum is 32G.

TWS stereo sound play

• Turn on two M7 speakers and enter into bluetooth mode. Short press “ ” button of one speaker.
• TWS light starts to flash, the speaker will automatically search the other for a TWS connection,if they are connected successfully, two speakers will switch into left and right channels automatically.
• Repeat the bluetooth connection operation and connect to the phone, If they connect successfully, music will play on the speaker showing dual stereo sound effects.

Note:

• This function requires two M7 speakers, make sure both are turned on and in bluetooth mode.
• No bluetooth connection to any other devices before TWS paring.
• When TWS is connected, short press“ ”key of one speaker to cancel the interconnection.

Cool party lights

Switch on and enter the light effect mode before the shutdown, Long press “ ” key to turn on/off lights. Short press to switch to BASS sound.

Type-C Quick charge

Do not use a power adapter that has not been certificated by Safety certification.
A power adapter with output 5V 1.5A is recommended for charging.

1. The audio voice prompt “Out of battery”, and the red light of the charging prompt light flashes. Please charge the speaker as quickly as possible.
2. This speaker supports self-adaption charging. It’s able to choose to charge current automatically according to the external rated power of the adapter, When char ging by USB interface on the computer, the current is smaller and it takes a longer time to complete charging.
3. The light is breathing when charging, and the white light is always on when fully charged.

Energy saving:

The speaker will automatically shut down to save power under be low circumstances.

1. In bluetooth mode, after 20 minutes of waiting for no device pa iring.
2. In any mode, short press “ ”key to pause for 20 minutes without any operation the speaker will shut down automatically, Please long press the power key t o turn it on again.

TECHNICAL PARAMETERS

• input voltage  5V 1.5A
• Bluetooth version  5.0
• frequency response  50HZ~20KHZ
• Rated power  30W
• Product weight  527g
• Battery capacity  3600mAh
• Product size  L:195W:77H:80mm

HOW TO EMAIL QUICKLY?

Please scan QR code and email to us.

eduplink_warranty@126.com
eduplink_support@126.com
Manufacture : Shen zhen ZhiQi Technology Co., Ltd.
Address : B902 Baochengtai Square, No.38 Qinfu road, Liuyue  Community, Henggang Street,Longgang District,Shenzhen. China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>