BOSCH BHU3200 Intuvia 100 Instruction Manual

: June 3, 2024
: Bosch

Table of Contents

BOSCH BHU3200 Intuvia 100
Safety instructions
Product Description and Specifications
Product Features
Technical Data
Assembly
Operation
Maintenance and servicing
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOSCH BHU3200 Intuvia 100

Safety instructions

Read all the safety information and instructions. Failure to observe the safety in-formation and follow instructions may result in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future reference.
The term battery is used in these instructions to mean all original Bosch eBike rechargeable battery packs.

Read and observe the safety warnings and directions contained in all the eBike system operating instructions and in the operating instructions of your eBike.
Do not attempt to secure the display or operating unit while riding.
Do not allow yourself to be distracted by the on-board computer’s display. If you do not focus exclusively on the traffic, you risk being involved in an accident. If you want to make entries in your on-board computer other than switching the assistance level, stop and enter the ap-propriate data.
Do not use your smartphone while riding. If you do not focus exclusively on the traffic, you risk being involved in an accident. Only enter the relevant data having stopped first.
Set the display brightness so that you can adequately see important information such as speed and warning symbols. Incorrectly set display brightness may lead to dangerous situations.
Do not open the on-board computer. Opening the on-board computer may damage it beyond repair and void any warranty claims.
Do not use the on-board computer as a handle. Lifting the eBike up by the on-board computer can cause irrepar-able damage to the on-board computer.
Do not stand your bicycle upside down on its saddle and handlebars if the on-board computer or its holder protrude from the handlebars. This may irreparably damage the on-board computer or the holder. Also re-move the on-board computer before placing the bicycle on a wall mount to ensure that the on-board computer does not fall off or become damaged.
Caution! When using the on-board computer with Bluetooth® and/or WiFi, interference can occur with other devices and equipment, aircraft and medical devices (e.g. pacemakers, hearing aids). Likewise, injury to people and animals in the immediate vicinity cannot be excluded en-tirely. Do not use the on-board computer with Bluetooth® in the vicinity of medical devices, petrol stations, chem-ical plants, areas with a potentially explosive atmosphere or on blast sites. Do not use the on-board computer with Bluetooth® in aeroplanes. Avoid using the on-board com-puter near your body for extended periods.
The Bluetooth® word mark and logos are registered trade-marks owned by Bluetooth SIG, Inc. and any use of such marks by Bosch eBike Systems is under licence.
The on-board computer is equipped with a wireless interface. Local operating restrictions, e.g. in aero-planes or hospitals, must be observed.

Safety instructions for coin cells

WARNING! Ensure that the coin cell is kept out of the reach of children. Coin cells are dangerous.
Coin cells must never be swallowed or inserted into any other part of the body. If you suspect that someone has swallowed a coin cell or that a coin cell has entered the body in another way, seek medical attention immediately. Swallowing coin cells can result in severe internal burns and death within two hours.
Ensure that coin cell replacement is carried out prop-erly. There is a risk of explosion.
Only use the coin cells listed in this operating manual. Do not use any other coin cells or other forms of electrical power supply.
Do not attempt to recharge the coin cell and do not short circuit the coin cell. The coin cell may leak, ex-plode, catch fire and cause personal injury.
Remove and dispose of drained coin cells correctly. Drained coin cells may leak and cause personal injury or damage the product.
Do not overheat the coin cell or throw it into fire. The coin cell may leak, explode, catch fire and cause personal injury.
Do not damage the coin cell and or take the coin cell apart. The coin cell may leak, explode, catch fire and cause personal injury.
Do not allow damaged coin cells to come into contact with water. Leaking lithium may mix with water to create hydrogen, which could cause a fire, an explosion, or personal injury.

Only for Australia
Caution! Battery is hazardous and is to be kept away from children (whether the battery is new or used). Battery can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body. Medical attention should be sought immediately if it is sus-pected the battery has been swallowed or placed inside any part of the body.

Privacy notice
If the on-board computer is sent to Bosch Service because it requires servicing, the data stored on the on-board com-puter may be transmitted to Bosch.

Product Description and Specifications

Intended Use
The Intuvia 100 on-board computer is designed to display cycling data.
To access the full functionality of the eBike system and Intuvia 100 on-board computer, you will need a compatible smartphone installed with the eBike Flow app (available from the Apple App Store or the Google Play Store), e.g. for

.

Product Features

The numbering of the components shown refers to the illustrations on the graphics pages at the beginning of the manual.

BOSCH-BHU3200-Intuvia-100-1

Bluetooth® button
Battery compartment cover
Locking screw support
On-board computer contact
Reset button
Locking screw for on-board computer
Holder for on-board computer
On-board computer cradle
On-board computer
Rubber seal
Non-rechargeable battery (coin cell type CR2450)
Slotted screwdrivera)
Battery compartment
Holder fastening screw
- Not included in the scope of delivery
  Display Elements of On-Board Computer
- Battery charge indicator
- Bike lights display
- Assistance level indicator
- Drive unit assistance indicator
- Unit indicator
- Text indicator
- Navigation bar
- Value indicator
- Speedometer

Technical Data

On-board computer : Intuvia 100

Product code BHU3200
Operating temperature A) °C −5 to +40
Storage temperature °C +10 to +40
Battery 1× CR2450
Protection rating IP54
Weight, approx. g 63
Bluetooth® Low Energy 5.0
- Frequency MHz 2400–2480
- Transmission power mW ≤ 1

The licence information for the product can be accessed at the following Internet address:
http://www.bosch-ebike.com/licences.
Declaration of Conformity
Robert Bosch GmbH, Bosch eBike Systems, hereby declares that the Intuvia 100 radio communication unit complies with Directive 2014/53/EU. The full text of the EU Declara-tion of Conformity is available to view at the following web- site: https://www.bosch-ebike.com/conformity.
Robert Bosch GmbH, Bosch eBike Systems, hereby declares that the Intuvia 100 radio communication unit complies with the Radio Equipment Regulations 2017 (SI
2917/1206). The full text of the UK Declaration of Conform-ity can be accessed at the following Internet address: https://www.bosch-ebike.com/conformity.

Assembly

Inserting and removing the on-board computer (see figure A)
To insert the on-board computer, insert the lugs of the bat-tery compartment (13) into the cradle (8) of the holder, and press the on-board computer gently down. To lock, turn the on-board computer clockwise until it engages.
To remove the on-board computer (9), turn it anticlockwise and remove the on- board computer from the cradle (8).

Remove the on-board computer when you park the eBike.

Inserting the locking screw (see figure B)
The on-board computer can be secured in place to prevent it from being removed from the holder. The on-board com-puter must be in the holder for this. Undo the fastening screw (14) of the clamp with a hex key until the holder (7) can be moved. Turn the holder (7) until the bottom side of the on-board computer is accessible. Insert the locking screw (6) and bolt it with the on-board computer. Align the holder (7) correctly with the on-board computer and tighten the fastening screw (14) again with a hex key.
Please note: The locking screw is not designed to prevent theft.

Operation

Connection of the On-Board Computer with the eBike System (Pairing)
Your on-board computer is generally already connected with the eBike system. If this is not the case, proceed as follows:

Install the eBike Flow app.
Activate Bluetooth® on your smartphone and open the eBike Flow app.
Briefly press the Bluetooth® button.
The device identification is shown on the display.
Select the required tool with the same identification in the eBike Flow app.

You can find further information at the following link: https://www.bosch- ebike.com/de/help-center/intuvia-100.

Depending on the smartphone’s operating sys-tem, the eBike Flow app can be downloaded free of charge from the Apple App Store and the Google Play store.
Use your smartphone to scan the code in order to download the eBike Flow app. Switching the on-board computer on/off

Switch on the eBike system.
To switch on the on-board computer, gently move the eBike or tap the display.
The following options are available for switching off the on-board computer:

Press the ON/OFF button on the operating unit to switch off the eBike system.
The on-board computer is also switched off.
Remove the on-board computer from its holder.
The on-board computer switches off automatically after 60 seconds.

Power supply for the on-board computer
The on-board computer is provided with energy by the CR2450 coin cell.

Changing the non-rechargeable battery (see figure C)
When the non-rechargeable battery of the on-board computer is nearly drained, you’re shown a corresponding message on the display. Open the battery compartment
cover (2) with a slotted screwdriver (12), remove the used non-rechargeable battery and insert a new non-rechargeable battery of type CR2450. You can obtain the non-re-chargeable batteries recommended by Bosch from your bi-cycle dealer.
When inserting the non-rechargeable battery, ensure that the rubber seal (10) is correctly positioned.
Seal the battery compartment and slide the on-board com-puter onto the holder.

Battery charge indicator
The on-board computer shows the state of charge of the eBike rechargeable battery in per cent. A notification is dis-played once when the battery’s state of charge falls below 30%, and again when it falls below 10%. The notification can be confirmed, or it simply disappears after 5 s.

Operation
The Bluetooth® (1) button has various functions. If the on-board computer was connected with an operating unit and has been removed from the holder, the displays can be switched within 60 s. To do so, briefly press the Bluetooth® (1) button.
Note: If you are not going to be using your eBike for several weeks, remove the on-board computer from its holder and set the on-board computer to storage mode. To do so, press the Bluetooth® (1) button for 8–11 s.
The reset button (5) serves to reset the on-board computer to factory settings and delete all connections.
The on-board computer can be operated and the indicators can be controlled via one of the depicted operating units. The meaning of the buttons on the operating units for the display indicators can be found in the following overview.
Depending on how long it is pressed for, the select button has 2 functions.

Please note: All screenshots showing the display and text on the following pages are from the approved software ver-sion. The display and/or text may change slightly following a software update.
Note: Depending on the lighting conditions, there is back-ground lighting that is only activated by pressing a button. The lighting duration can be adjusted.

Displays and settings of the on board computer
Speed and distance indicators
The speedometer always displays the current speed.
You can choose from the following functions in the function display (combination of text indicator and value indicator):

: Average speed achieved since the last re-set
: Maximum speed achieved since the last reset
: Total distance travelled with the eBike (cannot be reset)

Note: The on-board computer automatically displays a gear change recommendation when riding the eBike. The display of the gear change recommendation is superimposed over the text display (f) of the on-board computer, and can be de-activated manually via the basic settings.

Switching Between Display Functions
Certain settings cannot be assumed on the on-board computer, but only in the eBike Flow app, e.g.:

In addition, you receive an overview of the operating hours and the installed components in the eBike Flow app.

Displaying/adjusting basic settings
Note: The settings menu cannot be called up while riding. To get to the basic settings menu, press the select button on the operating unit until

appears in the text display.

Switching/Leaving Basic Settings
Press switch the select button until the required basic setting is displayed.
Note: The changed setting is automatically saved upon leaving the respective basic setting.

Changing Basic Settings
To scroll down, briefly press the select but-ton until the required value is displayed.
To scroll down, press the select button > 1 s until the required value is displayed.
Note: Pressing and holding the relevant button switches automatically to the next value in the basic settings.
You can choose between the following basic settings:

: You can select your preferred system language here.
: Displaying the speed and distance in either kilometres or miles.
: You can set the time here.
: Displaying the time in 12-hour or 24-
: You can reset the settings by pressing and holding the select button here.
: You can leave the settings menu with this function.

Leaving the Basic Settings Menu
You leave the basic settings menu automatically if you are in-active for 60 s or start riding the eBike, or by using the function.
Briefly press the select button to leave the basic settings menu using the

function. Press the select button > 1 s to leave the basic settings menu using the function.

Maintenance and servicing

Maintenance and cleaning
Do not clean any of the components with pressurised water.
Keep the screen of your on-board computer clean. Dirt can cause faulty brightness detection.
Clean your on-board computer using a soft cloth dampened only with water. Do not use cleaning products of any kind.
Have your eBike system checked by an expert at least once a year (including mechanical parts, up-to-dateness of system software).
In addition, the bicycle dealer may base the service date on the distance travelled and/or on a period of time. In this case, the on-board computer displays a message telling you when the service date is due each time it is switched on.
Please have your eBike serviced and repaired by an authorised bicycle dealer.

Have all repairs performed only by an authorized bike dealer.

Note: If you are handing in your eBike to a bicycle dealer for maintenance, it is recommended that you temporarily deac-tivate the <eBike Lock> and to prevent false alarms.

After-sales service and advice on using products
If you have any questions about the eBike system and its components, contact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please visit www.bosch- ebike.com.
Transport

If you transport your eBike attached to the outside of your car, e.g. on a bike rack, remove the on-board computer and the eBike battery to avoid damaging them.

Disposal
The drive unit, on-board computer incl. operating unit, battery, speed sensor, accessories and packaging should be disposed of in an environmentally correct manner. Check that your personal data has been deleted from the device.
Do not dispose of eBikes and their components with house-hold waste.
In accordance with Directive 2012/19/EU and Directive 2006/66/EC respectively, electronic devices that are no longer usable and de-fective/drained batteries must be collected separately and recycled in an environmentally friendly manner. Please return Bosch eBike components that are no longer usable free of charge to an authorised bicycle dealer or to a recycling facility.
Subject to change without notice.