QAZQA 102956 Outdoor Industrial Wall and Ceiling Lamp Instruction Manual

QAZQA 102956 Outdoor Industrial Wall and Ceiling Lamp

Product Information

Product Usage Instructions

1. Ensure the power supply is within the range of 220-240V~.
2. Check the frequency is set to 50Hz.
3. Verify the IP rating is IP44 for outdoor usage.
4. Turn the switch to the “OFF” position.
5. Identify and locate components labeled as “a”, “b”, “c”, and “d”.
6. Connect “ba” and “bc” components to the corresponding terminals labeled “LL” and “NN”.
7. Connect components labeled “a”, “b”, and “cd” as instructed.
8. Switch ON the device by turning the switch to the “ON” position.

Overall Sizes:

Contact Information:

Manufacturer (NL)| FittinQ B.V.| Smaragdweg 52, 5527 LB Hapert, The Netherlands| www.qazqa.nl
---|---|---|---
Manufacturer (UK)| FittinQ LTD| 55 Baker Street, London, W1U 7EU United Kingdom|

INSTALLATION

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.

FEATURES

Meaning of symbols:

1. This icon indicates the level of water-proof and dust-proof
2. Protection Class I: the fitting must be earthed
3. Protection Class II: the fitting is doubled insulated and does not require earthing
4. Protection Class Ill: the fitting is low voltage
5. Minimum distance from lighted objects (meters)
6. The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
7. The armature is designed to work only with the indicated voltage. Different items require different working voltage.
8. The luminaire can be used in combination with a dimmer
9. The luminaire can be dimmed by wall switch
10. The reference light angle and light space of the luminaire
11. This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste

Take note of the symbols when connecting wires:

1. Live conductor
2. Earth conductor
3. Neutral conductor

FittinQ B. V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.gazqa.nl
FittinQ LTD 55 Baker Street, London, W1U 7EU United Kingdom

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>