SOLUM CD16BTS01W Sticker Tag User Manual
- June 15, 2024
- SOLUM
Table of Contents
User manual
1. Functional Description
CD16BTS01WXWSM and 2 other types(CD16BTS06W, CD16BTS90W) are sticker device that can easily attach to the things(like as box, equipment…). This Device only can do Tx. It is not support to RX. Use APP or PC to locate their things by finding with the BLE system(like as SamrtPhone, BLE Gateway…)
2. Features
- BLE – compliant
- Compact dimension: 31mm x 72mm x 0.8mm
- Host Interfaces: UART Interface
- RoHS compliant
- Supply voltage range
Nominal Voltage 3.0V(1.7V ~ 3.3V)
3. Electrical Characteristics
-.Absolute Maximum Ratings
Item
| Spec. | Unit| Condition
---|---|---|---
Min| Typ.|
Max
ADV
| | 150 | | uA| Average
Sleep| | 1.7 | | uA|
Average
-.Recommended Operating & Environmental Conditions
Items
| Parameter| Spec. | Unit| Condition
---|---|---|---|---
Min| Typ. |
Max
Temp
| Operating Temperature | -10| | 70| °C|
Storage Temperature| -20 | | 80|
°C
Weight
| 2.6 ±5% | g|
|
g
4. RF Specifications
All measurements are made under nominal supply voltage, room temperature, and conducted conditions at each antenna port except antenna.
Items
| Parameter| Spec. | Unit| Condition
---|---|---|---|---
Min| Typ.|
Max
Tx
| Transmit Frequency | 2402| | 2480| MHz| Bluetooth 5.0
Transmit Power | –| 4| –| dBm|
Frequency Deviation
| –| ±250| –| KHz|
BLE 1Mbps
5. FCC
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
IMPORTANT NOTE : FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation of the device.
6. CE Traceability
Product Name: Sticker Tag
Model Name: CD16BTS01W
( Series Model Name: CD16BTS06W and CD16BTS90W)
Manufacturer: SOLUM CO., LTD
(Address: 357, Yongin Techno Valley Building A, Guseong-ro, Giheung-gu, Yongin-si, Gyeonggi-do, 16914, Republic of Korea )