gorenje eco 40-60 Washing Machine User Guide
- June 15, 2024
- Gorenje
Table of Contents
gorenje eco 40-60 Washing Machine
This washing machine is equipped with automatic safety functions that detect and diagnose at an early stage and react appropriately.
- Program selector
- Program and function status display window
- Temp.” button °C
Optional Functions
Yes: Detergent Required
Cannot be sclected
Temperature of unheated water Nitry Storm and El Sam are on washing are
suitable o sterile the colors clothes, When you see the door glass with water
mist, please don’t put your hand on the door glass or open the dispenser to
prevent burns.
Specifications
Description | Value |
---|
Model
|
WNHPl84AS
|
WNHPl94BS
Washing Capacity| 8.0/9.0kg
Max.spin speed| 1400rpm
Net Weight| 58kg
Rated Voltage| 220-240V-
Heating Power| 1500W
Washing Power| 300W
Dimensions(mm)
Index | Dimension(mm) |
---|---|
A | 595 |
B | 845 |
C | 460 |
0 | 510 |
E | 540 |
F | 1000 |
Add Detergent, Close the Door, and Set the Program
Load the clothes to be washed in the drum and close the door. Add the
detergent into the relevant compartments for the type of program you are going
to select, Add detergent as described in the Detergent and Additives section
of the User’s Operation Manual.
- Turn on the power.
- Spin the program selection button to the required program, “off” must be passed through if the pointer’s initial position is not “off”, start-up.
- Select the washing temperature, and the spin speed by pressing the “Temp”, and “Spin” buttons.
- Press the “Options” button to select additional functions.
- After starting the program, the display window displays the program length (hours: minutes) and additional function options in sequence.
Addition function selection
At standby state, press the “Options” button to select an additional function
for the current program. Select only one function for each press, and then the
corresponding icon flashes. After starting up, the program cannot be changed.
Pre-wash U
- Select the function to conduct pre-wash to enhance washing effects and better remove stains. This function is suitable for heavy-dirt clothes.
- Before inflowing, laundry detergent/ washing powder can be added to the pre-wash box, and washing powder must be added to the main wash box.
Extra Rinse E
After setting the function of rinsing adding, the program runs the rinsing
process once again before running the softening, and the total running time of
the program increases accordingly.
Intensive T
The function can be selected to prolong washing time, strengthen washing
effects, and better remove stains.
Inlet water warning
If the tap is not opened, or the water pressure is over low, the display
screen will prompt “F01” to give the alarm.
Drainage warning
If the pipe is squeezed, drainage will not be smooth. In case of failing to
completely drain for a long time, the display screen will prompt “F03” to give
the alarm.
Door Lock Icon
- After the program starts the Door Lock icon will light up and the door will be locked.
- After completing the program, the door lock unlocks automatically.
- During the pause, if the door opening condition can be met halfway, the door lock will unlock and its indicator light will go out.
- When the door lock indicator light flashes, the door shall not be opened forcibly to avoid personal injury.
Delay End Function
The delay end function allows them to run the machine at the consumers’ convenience, for example, at night when electricity is cheaper. Only under the standby mode, this button is valid for selecting the reservation time. After the reservation function is selected, the time will increase by 1h each time the reservation button is pressed. Before reservation, if the program time does not satisfy the integral multiple of 1h, it shall be completed by pressing the reservation key for the first time, and then the time increases Ih each time the reservation button is pressed. If the reservation is selected, before the program runs, the current reservation can be canceled by turning the button to select other programs
The delay time must be longer than the wash program length as the delay time is the time the program will finish. For example: if the selected program time is 02:28, the delay time selected must be between 03:00 and 24:00. When the reservation process is operated, the icon of reservation time’ will be on. When the reservation process is finished, the icon of ‘reservation time’ will be off.
Favourite
After selecting the program setting each parameter and starting, long press
the Favorite key for 3s to memorize the selected program, temperature,
rotational speed, and other related settings, and then the Favorite symbol
lamp will be on. Under the circumstance that the Favorite lamp is not on,
short press the Favorite key, then the program will be switched to the program
memorized last time; and the meantime, the temperature, rotational speed, and
other parameters will automatically change into the parameters memorized last
time. At this moment, if switching the program or pressing other keys, the
panel will display a new program and parameters, and the Favorite symbol lamp
will be off. When the user uses it for the first time, if he/she has never
long pressed the Favorite key to collect programs, he/she can short press the
Favorite key, and then the cotton linen program and its default settings will
be collected by default.
Mute Function
When the machine is in the state of holding, pause, or operation, press the
“Spin+ Favourite” buttons for 2 seconds, The display will show the mute
function fault icon. All the buzzing will be turned off except the alarms.
When the machine is in the mute state, press the “Spint Favourite buttons for
2 seconds until the mute function fault icon lights off. All the buzzing will
be activated.
Automatic weighting
The washing machine displays ” …” after startup, indicating that it is
weighing automatically. It will adjust the program length (hours: minutes)
automatically according to the weight of the clothes.
Child Lock
To strengthen the safety of children, this machine is equipped with a Child
Lock function. When the program starts, press the “Temp. +Spin” button for 2
seconds. A child Lock icon will light up, and then Child Lock is set up.
Repeat the same operation, the Child Lock will be released.
- When the Child Lock is set, all function buttons will be shielded.
- When you turn the machine off by rotating the program selection button”Off, child lock is released.
- After completing the program, the child lock will automatically unlock.
To Start the Program
- After you have selected your options and placed detergent with the detergent dispenser, turn on the water tap and press the “Start / Pause” button.
- The screen will display the current program progression with icons from left to right. It also displays the remaining program time.
To Cancel the Program or Reselect the Options
- Rotate the program to “Off” for 3 seconds to turn off the machine.
- Select the new program and options.
- Press the “Start / Pause” button to turn on the machine without adding any extra detergent.
End of the Program
The washing machine shows “END” at the end of the program when the door is
unlocked. If the knob is turned to “Off”, the power will be cut off. If there
is no button or knob operation within 2 minutes, the program will
automatically power off.
Program Instructions
- The eco 40-60 program can clean normally soiled cotton laundry declared to be washable about 40°C to 60°C, together in the same cycle, and this program is used to assess compliance with the EU ecodesign legislation.
- The power consumption of the off-mode is 0.49W.
- The most efficient programs in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
- Loading the household washing machine up to the capacity indicated by the manufacturer for the respective programs will contribute to energy and water savings.
- correct use of detergent, softeners, and other additives. Do not apply excessive detergent. This may affect the washing results adversely.
- Periodic cleaning, including optimal frequency, and limescale prevention and procedure.
- Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, he higher the noise and the lower the remaining moisture content.
- The product information and QR code are reflected in the energy consumption label, the product registration information a be obtained by scanning the QR code.
- The information of standard programs.
Program
| Sclcr1cd Tern- pcraturc (“C)| Rated Capaci1y
(kg)
| Maxi-
mum lempera- tu.rein drum (°C)
| Program duration (h: min)| Energy con- sump-tio n kWh/cy- clc| Water con- sumption li1rcs/cy- clc| Remain- ing moisture content
(%)
| \,taxi-
mum specdrca chcd rpm
---|---|---|---|---|---|---|---|---
Eco40-60
full load
| 8 kg 9kg| |
9
| 36
43
| 3:26
3:48
| 0.780
1.069
| 55.0
46.0
| 52.50
52.50
| 1400
1400
Eco 40-60
halfload
| 8 kg
9kg
| | 4
4.5
| 29
34
| 2:48
2:54
| 0.370
0.454
| 40.0
36.0
| 52.50
52.50
| 1400
1400
Eco 40-60
1/4 load
| 8 kg
9kg
| |
2.5
|
26
24
| 2:48
2:54
| 0.220
0.218
| 30.0
30.0
| 52.50
53.50
| 1400
1400
20°c
| 8 kg
9 kg
| 20
20
|
9
| 20
20
| 1:50
1:50
| 0.240
0.170
| 68.0
60.0
| 55.00
54.00
| 1400
1400
Cotton
| 8 kg 9kg| 60
60
|
9
|
57
56
| 3:49
3:49
| 1.220
1.550
| 68.0
85.0
|
55.00
54.00
|
1400
1400
Mix
| 8kg| 40|
4
| 40| 1:58| 0.800| 65.0| 55.00| 1400
| 9 kg| 40| 4.5| 38| I :58| 0.600| 55.0| 54.00| 1400
Speed 15′
| 8 kg
9 kg
| 40
40
| | 40
38
| 0:30
0:30
| 0.450
0.330
| 25.0
22.0
| 55.00
55.00
| 800
800
The values given for programs other than the eco 40-60 program are indicative only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>