BLAZEVIDEO NV3180 Trail Camera User Manual

BLAZEVIDEO NV3180 Trail Camera

Product Information

Specifications

• Still Image Size : 3M(2048×1536)/2M(1600×1200)/1M(1280×960)/VGA(640×480)
• Video Size : 1080P(1440×1080@30FPS)/960P(1280×960@30FPS)/VGA(640×480@30FPS)
• Aperture : F 1.2 f=25mm
• Outer screen: 98*48mm, 4X optical amplification
• Digital Zoom : 4X
• Storage Media: Micro SD card, up to 32GB
• Viewing Distance in all dark : 200M-300M
• Viewing Distance in weak light : 3M~infinity
• IR LED : 3W,850nm
• USB Port : Micro USB 2.0
• Power Source : 9V, 6xAA
• Operating Temperature : -20 to +60
• Storage Temperature : -30 to +70
• Dimension: approx.19614659mm
• Weight : approx.576g

Product Usage Instructions

Power Supply
Please install batteries into the device before using.

1. Open the battery cover on the back of the device.
2. Insert 6 x 1.5V AA batteries into the battery compartment. Make sure the polarity is correct.
3. Close the battery cover.

Inserting Memory Card

1. Please prepare a Micro SD card (up to 32GB) in advance.
2. Open the card slot cover, you will see the card slot.
3. Insert the Micro SD card into the slot. Make sure the direction is right. Never insert the card forcibly.
4. Format the Micro SD card, this can improve the battery life and shutter speed.
5. To remove the card from the memory card slot of the device, press the edge of the memory card in gently, the card will pop out. Then remove the card.

Basic Operation

• Turn On And Turn Off: Keep pressing the power button for 3 seconds to turn on the device. Keep pressing the power button for 3 seconds again can turn off the device.
• Changing The Modes: The night version has 3 different modes: photo mode, video mode, and playback mode. Press the Mode button to change the mode.

Taking Still Photos

1. Turn on the device. The default mode is photo mode. If not, press the Mode button to switch to photo mode.
2. Zooming : Keep pressing the Up/Zoom in or Down/Zoom out buttons to zoom in or zoom out the image. The value of magnification level appears on the LCD screen.
3. Take a still photo
   • View your subject via the LCD screen.
   • Press the Shot button to take a photo.

Recording Video

1. Turn on the device. Press the Mode button to switch to video mode.

2. Zooming
   Keep pressing the Up/Zoom in or Down/Zoom out buttons to zoom in or zoom out the image. The value of magnification level appears on the LCD screen.

3. Start to record video

   • View your subject via the LCD screen.
   • Press the Shot button to start recording. The record duration will be shown on the LCD screen.

4. Finish recording

   • Press the Shot button again to stop recording.
   • The device will stop recording automatically once the capacity of the memory card is full.

Settings in Photo and Video Mode
In photo or video mode, press the Menu button to change the settings.

Menu Options

• Photo Resolution : Set the photo resolution. Options: [3M 2048×1536]/[2M 1600×1200]/[1M 1280×960]/[VGA 640×480]
• Video Resolution : Set the video resolution. Options: [1080P 1440×1080@30FPS]/[960P 1280×960@30FPS]/[VGA 640×480@30FPS]

FAQ

• Q: What is the maximum storage capacity for the Micro SD card?
  A: The maximum storage capacity for the Micro SD card is up to 32GB.

• Q: Can I use rechargeable batteries for the device?
  A: Yes, you can use rechargeable batteries as long as they are 1.5V AA batteries.

Product Overview

3. IR Up/Zoom in/Up

Button

| 4. IR Down/Zoom

out/Down Button

5. Power Button| 6. Strap Hole
7. IR LEDs| 8. Menu Button
9. Mode Button| 10. Shot Button
11. Battery Cove|

Specification

• Still Image Size : 3M(2048×1536)/2M(1600×1200)/ 1M(1280×960)/VGA(640×480)
• VideoSize: 1080P(1440×1080@30FPS)/ 960P(1280×960@30FPS)/VGA(640×480@30FPS)
• Aperture: F 1.2 f=25mm
• Lens Angle : FOV=10°, diameter is 24mm
• Display Screen: Inner screen 2.31”(960240) TFT; Outer screen 9848mm, 4Xoptical amplification
• Digital Zoom: 4X
• Storage Media : Micro SD card, up to 32GB
• Viewing Distance in all dark : 200M-300M
• Viewing Distance in weak light : 3M~infinity
• IR LED : 3W,850nm
• USB Port : Micro USB 2.0
• Power Source : 9V, 6xAA
• Operating Temperature : -20℃ to +60℃
• Storage Temperature : -30℃ to +70℃
• Dimension : approx.19614659mm
• Weight : approx.576g

Power Supply

• Please install batteries into the device before using.
• Open the battery cover on the back of device.
• Insert 6 x 1.5V AA batteries into the battery compartment. Make sure the polarity is correct.
• Close the battery cover.

Inserting Memory Card

• Please prepare a Micro SD card(up to 32GB) in advance.
• Open the card slot cover, you will see the card slot.
• Insert the Micro SD card into the slot. Make sure the direction is right. Never insert the card forcibly.
• Format the Micro SD card, this can improve the battery life and shutter speed.
• To remove the card from the memory card slot of the device, press the edge of the memory card in gently, the card will pop out. Then remove the card.

Basic operation

• Turn On And Turn Off
  Keep pressing the power button for 3 seconds to turn on the device. Keep pressing the power button for 3 seconds again can turn off the device.

• Changing The Modes
  The night version has 3 different modes : photo mode, video mode and playback mode. Press the Mode button can change mode.

Taking Still Photos

1. Turn on the device,the default is photo mode. If not, press the Mode button to switch to photo mode.
2. Zooming
   • Keep pressing the button to zoom in or zoom out the image. the value of magnification level appears on the LCD screen.
3. Take a still photo.
   • View your subject via the LCD screen.
   • Press the Shot button to take a photo.

Recording Video

1. Turn on the device, press the Mode button to switch to video mode.
2. Zooming
   • Keep pressing the button to zoom in or zoom out the image. The value of magnification level appears on the LCD screen.
3. Start to record video.
   • View your subject via the LCD screen.
   • Press the Shot button to start to record. The record duration will be shown on the LCD screen.
4. Finish recording.
   • Press the Shot button again to stop recording.
   • The device will stop recording automatically once capacity of the memory card is full.

Notice

1. About the manual focus: On the left lens, marked “far” and “near”. If the observation distance is far, please rotate the lens to left. If the distance is near, rotate the lens to right. Users can repeatedly adjust the optimal focal length according to the actual observation distance.

2. There is no sound in the video files.
   Because the observation distance is far, the sound cannot be transmitted.

3. In photo/video mode, if you have to view the darkness environment, please short press IR UP button to activate the IR LEDs, the image will change to black and white. The IR LEDs have seven levels, short press IR UP button to up the level, short press IR DOWN button to down the level. (If the battery voltage is not enough, the IR LEDs level will down automatically. IR level can up to 7 level when the battery power is full.If only left half power, the level just can up to 5. If only left 25% power, the level just can up to 3. If the battery power is lower than 25%, IR LEDs can not be activated. )

Settings in Photo and Video Mode Press Menu button in photo or video mode, can change the settings.

• [3M 2048×1536]/[2M 1600×1200]
• [1M 1280×960]/[VGA 640×480]

Video Size| Set the video resolution. Options

• [1080 1440×1080]/ [9601280×960]/[640 640×480]

Night vision sensitivity| Choose the night vision sensitivity.

• Options: [Low]/[Middle]/[High].

---|---
Power Frequency| Set the light source frequency to match frequency of electricity supply in local region to prevent interference.

• Options :[50Hz]/[60Hz].

Power Save| Set the time to shut down the device for power saving if the device is idle. Options:[3min]/[5min]/[10min]/[OFF].
Date & Time| Set the date and time of device.
Date Stamp| Add the date stamp on the photo or video files.

• Options :[Off]/[Date]/[Date&Time].

Language| Set OSD (on-screen) language. Options:[English]/[Simplified Chinese/ [Traditional Chinese]/[French]/[Dutch]/ [Spanish]/[Italian]/[Portuguese]/[Germ an]/[Russian]/[Japanese]/[Korean].
ormat| Format your TF card. Format TF card will delete all files including the protected files. Please copy the important files before confirm.

• Options :[Yes]/[No].

Reset All| Restore the setup to factory default settings. Options:[Yes]/[No].
FW Version| User can see the firmware version information.
---|---

Playback

1. Turn on the device, press the Mode button to switch to playback mode.
2. Press Up/Down button to view photos and video files.
3. Playback the video
   • Press the Shot button to start playing the video files.
   • Press the Shot button again to have a pause.
   • Press Menu button to stop the current video playing. Press Menu button in playback mode,the screen will display the playback menu.Press Up/Down button to scan lock or delete. And press Shot button to select one to enter the submenu.

Playback menu list

Options: [Lock/Unlock one l]/[Lock All]/ N[Unlock All].

Delete| Delete the current one file or delete all files in memory card .Options :[One]/[All].

Download files to PC
There are two ways to download files from the device to a computer

• By inserting the memory card into a card reader.
• By connecting the device to a computer using the supplied USB cable.

Using a Card Reader

1. Eject the memory card from the device and insert it into a card reader.Then connect the card reader to a computer.
2. Open [My Computer] or [Windows Explorer] and double-click the removable disk icon that represents the memory card.
3. Copy images from the card into a directory of your choice on the computer’s hard disk.

Connecting the Device to a PC through the USB Cable

1. Turn on the night vision. Connect it to a computer through the supplied USB cable.
2. When connecting to the computer, it will appears “MSDC” on the screen.
3. Open [My Computer] or [Windows Explorer].
   • A”Removable Disk” appears in the drive list.
   • Double-click the “Removable Disk” icon to view its contents. Files stored on the camera are located in the folder named “DCIM”.
4. Copy the photos or files to your computer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>