Honeywell Home HCC100 Underfloor Multi Zone Controller User Guide
- June 4, 2024
- Honeywell Home
Table of Contents
Honeywell Home HCC100 Underfloor Multi-Zone Controller
HCC100 Underfloor Multi-Zone Controller
Online instructions
System Status and Faults
- Flash Blinking
- Pulsing (breathing)
- Only when it’s a wireless thermostat
- Only when wireless device binding is configured ( green = encrypted, orange = standard)
Zone Overview
Zone| Zone Name| Thermostat location| Wired or Wireless|
Actuator Output
---|---|---|---|---
1| | | |
2| | | |
3| | | |
4| | | |
5| | | |
6| | | |
7| | | |
8| | | |
Connections
Advanced Parameter List
INSTALLATION STEPS
-
Install “Resideo Pro” App
-
Create an account
Account approval -
Log in and follow the instructions to configure the system
-
Switch power OFF
-
Remove cover
-
Mounting on a wall
-
Mounting on a DIN rail
-
Screw terminals
-
Cable strain relief
-
Spring terminals
-
Cable strain relief
-
Antenna connection
-
Antenna placement
-
Replace cover
-
Switch power ON
Pittway Sarl, Z.A. La Pièce 4, 1180 Rolle, Switzerland Country of origin :
Slovakia
© 2022 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell
International Inc. This product is manufactured by Resideo Technologies, Inc.
and its affiliates.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>