Safescan 70 UV Counterfeit Detector User Manual

Safescan 70 UV Counterfeit Detector

PACKAGE CONTENTS

1. Safes can 50 or 70 counterfeit detector
2. Manual

THE DEVICE

Safes can 50

1. On/Off button

2. Ultraviolet lamp (UV)
   Safes can 70

3. Light switch (UV/WL) button

4. Ultraviolet lamp (UV)

5. White light (WL)

6. Motion sensor

7. Light guide
   Safes can 50 & 70

8. Power cord outlet

9. UV-lamp removal tool

GETTING STARTED

OPERATING INSTRUCTIONS

Safes can 50

• Plug in and push the on/off switch for checking UV features on banknotes and ID’s. Switch off after use.

Safes can 70

• Plug in and push the light switch button once for UV light to check UV features on banknotes and ID’s. Push the light switch button again for white light to check watermark, metal thread and micro print. After not using the Safescan 70 for 20 seconds in white light mode and 5 minutes in UV light mode, it will automatically go to standby.
• To turn off the automatic standby function, press and hold the light switch button for 5 seconds, until the light guide goes out. After releasing the button it blinks twice. Repeat to reactivate the automatic standby function. To learn about safety features of banknotes and what to look for, please visit www.euro.ecb.int (euro), or your local national bank website (other currencies).

REPLACING THE UV-LAMP

1. Unplug the device from the power socket.
2. Hold it in your hand with the socket of the lamp facing upwards.
3. Take the UV lamp removal tool from the bottom of the device.
4. Place the hook between the 2 tubes and gently, but rely pull the lamp from the socket.
5.  Carefully remove the lamp from the device.
6. Turn the device with the lamp socket facing downwards.
7. Gently position the new lamp into the socket and press until it locks into place with a click.

MAINTENANCE

• Clean with soft dry cloth only
• Do not use in a damp environment
• Remove plug from socket when cleaning or when not in use
• Do not use under strong light for optimal performance

SPECIFICATIONS

• Dimensions (w x d x h) : 206 x 102 x 88 mm, 8.1 x 4.0 x 3.5 inch
• Ambient temperature : 0° C – 40° C (32° F – 104° F)
• Ambient humidity : < 85%
• Power source : 220-240V / 50Hz | 110V, 60Hz
• Power consumption : 11W max. (Safes can 50) / 16W max. (Safes can 70)

WARRANTY

• This product is in compliance with the essential requirements and other relevant provisions of the applicable European directives. The Declaration of Conformity (Dock) is available via www.safescan.com.
• If you want to dispose of the device, take it to a recycling center. Never throw away electrical products with the household trash.

www.safescan.com

• Safes can® is a registered trademark of Solid Control Holding B.V. No part of this manual may be reproduced in any form, by print, copy or in any other way without prior written permission of Solid Control Holding B.V. Solid Control Holding B.V. reserves all intellectual and industrial property rights such as any and all of their patent, trademark, design, manufacturing, reproduction, use and sales rights. All information in this manual is subject to change without prior notice. Solid Control Holding B.V. is not liable and/or responsible in any way for the information provided in this manual.
• www.safescan.com
• info@safescan.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>