tp-link DECO-E4-2 Pack Whole Home Mesh Wi Fi System Installation Guide
- June 15, 2024
- tp-link
Table of Contents
Quick Installation Guide
Getting Started
! Please remain online (Wi-Fi or mobile data) throughout the app download and
login steps.
Download the TP-Link Deco app for iOS or Android.
The app will walk you through the setup.
https://www.tp-link.com/app/qrcode/?app=deco
LED Status
Each Deco has an LED light that changes color according to its status. See the explanation below.
LED | DECO STATUS |
---|---|
Pulse Yellow | Deco is resetting. |
Solid Yellow | Deco is starting up. |
Pulse Blue | Deco is ready for setup. |
Solid Blue | Deco is setting up. |
Pulse Green/ Pulse White | Deco is upgrading firmware. |
Solid Green/ Solid White | Deco is all set up and connected to internet. |
Pulse Red | The satellite Deco is disconnected from main Deco. |
Solid Red | Deco has an issue. |
Safety Information
- Adapter shall be installed near the equipment and shall be easily accessible.
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
- Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-
link.com/en/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017.
The original UK Declaration of Conformity may be found at https://www.tp-
link.com/support/ukca/.
For TP-Link Branded Products Only. For the information about warranty period,
policy and procedures, please visit https://www.tp-link.com/en/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH
ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the
original packaging against defects in materials and workmanship when used
normally in according with TP-Link’ s guidelines for some period which depends
on the local service from the date of original retail purchase by the end-user
purchaser.
Operating Frequency/max output power| 2400MHz ~ 2483.5MHz / 20dBm
5150MHz ~ 5250MHz (Indoor use only) /23dBm
For Telephony device DSL only: 1880MHz ~ 1900MHz / 24dBm (conducted power)
For mobile device only: LTE Band
1,3,7,8,20,28,38,40/ Power
Class 3 WCDMA Band 1,8/ Power
Class 3 GSM 900MHz/ Power
Class 4 DCS 1800MHz/ Power
Class 1
*The actual frequency bands supported by your product may differ from the bands above.
---|---
Attention: In Great Britain, the operation in the frequency range 5150MHz – 5350MHz is only permitted indoors.
GNU General Public License Notice
This product includes software code developed by third parties, including
software code subject to the GNU General Public License (“GPL”). As
applicable, TP-Link (“TP-Link” in this context referring to the TP-Link entity
offering respective software for download or being responsible for
distribution of products that contain respective code) provides, by itself or
with the support of third parties (e.g. the TP-Link Corporation Limited), mail
service of a machine readable copy of the corresponding GPL source code on CD-
ROM upon request via email or traditional paper mail. TP-Link will charge for
a nominal cost to cover shipping and media charges as allowed under the GPL.
This offer will be valid for at least 3 years.
For GPL inquiries and the GPL CD-ROM information, please contact GPL@tp-
link.com or write to Suite 901, New East Ocean
Centre, Tsim Sha Tsui, Hong Kong. Additionally, TP-Link provides for a GPL-
Code-Centre under https://www.tp-link.com/en/support/gpl/ where machine
readable copies of the GPL source codes used in TP-Link products are available
for free download.
Please note, that the GPL-Code-Centre is only provided for as a courtesy to
TP-Link’s customers but may neither offer a full set of source codes used in
all products nor always provide for the latest or actual version of such
source codes.
The GPL Code used in this product is distributed WITHOUT ANY WARRANTY and is
subject to the copyrights of one or more authors. For further information
about GNU General Public License please refer to the following website:
https://static.tp-link.com/resources/document/GPL%20License%20Terms.pdf
Need some help?
Visit https://www.tp-link.com/support/
for technical support, the user guide, FAQs, warranty & more
http://www.tp-link.com/support
© 2022 TP-Link 7106509773 REV1.0.3
www.tp-link.com
References
- Link: Simple, secure one-click payments
- Anatel — Agência Nacional de Telecomunicações
- Support | TP-Link
- TP-Link
- Support | TP-Link
- CE Regulatory Compliance | TP-Link
- Support | TP-Link
- Support | TP-Link
- Support | TP-Link
- Support | TP-Link
- Support | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support
- Regulatory Compliance | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>