PANOEAGLE Outdoor 8MP PTZ PoE IP Camera Dome User Guide
- June 15, 2024
- Panoeagle
Table of Contents
**PANOEAGLE Outdoor 8MP PTZ PoE IP Camera Dome User Guide
**
Computer access to camera webinterface
A Connect the camera.
-
The camera is directly connected to the computer and provides DC12V power supply for it.
-
Connect via POE switch.
-
Connect via router
B. Download and open the camera search tool. (the IP address of the camera that has not been activated is 192.168.1.110.)
Download:http://ourdownload.store/
AjDevTools
Check whether the camera’s IP is in the same network segment as the computer’s
IP. If it is different, modify the camera IP to be in the same network segment
as the computer.(the first three digits of the camera’s IP address are the
same as the computer’s IP address, and the last digit is different.)
C. Open the IE browser, fill in the camera IP address, fill in the camera
account password, and download the plug-in preview (Need to close the browser
when installing theplug-in to prevent the plug-in installation from being
unsuccessful) The initial account is admin and the password is 123456.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>