PANOEAGLE PG2355I 2.8MM Hikvision 5MP IP PoE Security Camera User Guide

PANOEAGLE PG2355I 2.8MM Hikvision 5MP IP PoE Security Camera

connection and settings

Camera network connection and settings

1. Computer download and install the “AjDev” software tool.
   Download : http://ourdownload.store/

2. Please keep the computer and camera on the same LAN–Please network cable to connect, do not use Wifi

3. After installation, open the software and click the Start Search① Search for the IP address of the camera ②Query the IP address of the camera

4. Query your computer IP address–Open Network and Sharing Center—Details–View your computer’s IPV4 Address,Subnet MaskandGateway
   network segment
   Setting method:

5. Select the IP address of the camera

6. Click IP Batch Manual Setting IP address

7. Modify the IP address of the camera to be in the same network segment as the IP address of the computer or choose DHCP to obtain an IP address automatically

8. Select OK–Successfully modified

9. Double-click the camera IP address or Enter the browser to enter the camera IP address：192.168.1.123—Go to the login interface

10. Enter camera username: admin and password:123456—login successful

References

• ourdownload.store/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>