Lepro B22 Wifi Smart LED Bulb User Manual
- June 15, 2024
- Lepro
Table of Contents
Lepro B22 Wifi Smart LED Bulb
Installation Instructions
| | |
---|---|---|---
http://smartapp.tuya.com/lampuxledbrighter
Lepro Lamp UX
|
Lepro
| 
Install the light and make sure the light is blinking rapidly (not slowly). If
not, reset the light first.
Turn on the phone’s Bluetooth and connect to the WiFi network.
Follow the on-screen steps to finish set up.
Set up Voice Control (Optional)
Method A
Method B
If the light does not work, please go to Amazon Alexa or Google Home APP and click DISCOVER DEVICES.
Automation & Timer (Optional)
Does not support manual dimmer.
How to reset the light
- Switch on the light and keep it on for at least 10s. Then turn it off for 4-5s, go to the next step.
- Make sure the light blinks rapidly, if not: turn the light ON-OFF-ON-OFF-ON (Leave 1-2s between the off and on positions.)
- Wait for 2-3s until the light blinks rapidly.
Operation frequency range
|
2402-2480 MHz
---|---
Modulation type
|
DSSS (DBPSK/DQPSK/CCK); OFDM (BPSK/QPSK/16QAM/64QAM)
Maximum transmit power
|
17 dBm
Antenna Type
|
PCB Antenna
*SKUs:**
PR901001-EU-a PR901001-UK-a PR901001-EU-2-a PR901001-UK-2-a PR901001-EU-4-a
PR901001-UK-4-a| PR901002-UK PR901002-EU PR901002-UK-2 PR901002-EU-2
PR901002-UK-4-a PR901002-EU-4-a| PR901003-EU PR901003-UK PR901003-UK-2
PR901003-EU-2 PR901003-EU-4 PR901003-UK-4| PR902001-EU PR902001-EU-2
902002-EU-2 902002-EU-4 PR902004-EU-2 PR902004-EU-4| PR902005-EU-2
PR902005-EU-4 PR906001-EU PR906001-EU-2
EAN901001-EU-a EAN901001-UK-a EAN901001-EU-2-a EAN901001-UK-2-a
EAN901001-EU-4-a EAN901001-UK-4-a| EAN901002-UK EAN901002-EU EAN901002-UK-2
EAN901002-EU-2 EAN901002-UK-4-a EAN901002-EU-4-a| EAN901003-EU EAN901003-UK
EAN901003-UK-2 EAN901003-EU-2 EAN901003-EU-4 EAN901003-UK-4| EAN902001-EU
EAN902001-EU-2 EAN902002-EU-2 EAN902002-EU-4 EAN902004-EU-2 EAN902004-EU-4|
EAN902005-EU-2 EAN902005-EU-4 EAN906001-EU EAN906001-EU-2
Smart Lighting Holding Limited claims SKUs* meet the Radio Act 2014/53/EU. A complete Declaration of Conformity can be downloaded with this link:
FCC
Federal Communication Commission (FCC) Statement for Users Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.
Customers Support
LEPRO INNOVATION INC
3651 Lindell Road Suite D1048, Las Vegas, NV 89103, USA
www.lepro.com +1
866-287-2558
cs@lepro.com
Le Ming Trading Inc.
801-6081 No. 3 Rd. Richmond, BC, V6Y 2B2, CA
www.lepro.ca +1
833-433-1453
cs@lepro.ca
UK Importer:
Lighting EVER Ltd.
93 Addy House, Rotherhithe New Road, London, SE16 2PD, United Kingdom
www.lepro.co.uk +44
800-802-1244
cs@lepro.co.uk
Made in China en Chine in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>