Minneer GS56 Racing Simulator Cockpit Universal Steering Wheel Stand Instruction Manual

Minneer GS56 Racing Simulator Cockpit Universal Steering Wheel Stand

GS56 Racing Simulator Stand

Specifications:

• Product Name: GS56 Racing Simulator Stand
• Product Type: Racing Simulator Stand
• Accessories: Anti-skid foot bolt (8 pcs), Square Nut M8 (4 pcs)

Product Usage Instructions

Assembly Processes:

1. Unbox all the components and lay them out on a clean, flat surface.
2. Identify the anti-skid foot bolts (8 pcs) and square nuts M8 (4 pcs).
3. Assemble the anti-skid foot bolts to the stand by aligning the holes on the stand with the holes on the foot bolts.
4. Secure each foot bolt in place by tightening them with a suitable tool.
5. Attach the square nuts M8 to the designated locations on the stand.

FAQ :

• Q: What are the accessories included with the GS56 Racing Simulator Stand?
  A: The accessories included are 8 anti-skid foot bolts and 4 square nuts M8.

• Q: How many anti-skid foot bolts and square nuts are required for assembly?
  A: You will need 8 anti-skid foot bolts and 4 square nuts M8 for assembly.

GS56   Product Assembly Manual

Accessories explanation

Assembly Processes

1. Assemble the connecting bracket with 4 pieces of the U-shaped bolt(M8×80 ) and 8 pieces of the Nut (M8)
2. Assemble the front part bracket on the left and right with 8 pieces of the bolt(M8× 20 ) 、8 pieces of the shim (M8) and 8 pieces of the nut (M8)
3. Assemble the anti-skid foot bolt(8 pcs) to the stand
4. Assemble upper fixing bracket with 4 pieces of the bolt(M8×20 ) 、4 pieces of the shim (M8) and 4 pieces of the nut (M8)
5. Assemble pedal connecting bracket with 4 pieces of the bolt(M8×20 ) 、4 pieces of the shim (M8) and 2 pieces of the Nut (M8)
6. Assemble Steering wheel connection bracket with 4 pieces of the bolt(M8× 20 ) 、4 pieces of the shim (M8)
7. Assemble the steering wheel fixing bracket with 4 pieces of the bolt (M8×20) 、4 pieces of the shim (M8)
8. Assemble the elbow fixing stand and fixing plate on the left or right as your like to the Seat stand with 3 pieces of the bolt (M8×20) 、 3 pieces of the shim (M8) 、2 pieces of the U-shaped bolt(M8×50×80 ) and 4 pieces of the Nut (M8)
9. Assemble the seat adjustment stand with 4 pieces of the bolt (M8×45) 、4 pieces of the shim (M8) and 4 pieces of the square nut (M82525*5)

Assembly Introductions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>