ICOFRU XH-SENSORLIGHT Solar Motion Sensor Light User Manual
- June 15, 2024
- ICOFRU
Table of Contents
User Manual
ICOFRU Solar Motion Sensor Light
Thank you for purchasing our products. To ensure a better experience, please read this manual carefully before using the lights.
PACKAGE LIST
- Solar Lights
- Bracket
- Base
- Screws
- User Manual
SPECIFICATION
Solar Panel：6V / 3W Monocrystalline Silicon
Number of LEDs：168 PCS
Sensing Distance：≤ 32.8 FT
Battery: 2800mAh
Color Temperature: 6500K
HOW TO USE
- Press the switch to turn on the solar light.
- You just need to install it where you need and it will automatically charge during the day and work automatically at night.
- It will automatically turn on the light when it detects human motion within a range of 32.8 feet, and turn off after 20 seconds of no motion detection.
INSTALLATION
- Use the screws to install the base on the place you want to install, on the wall or eaves or fence.
- Adjust the required angle and connect the bracket to the solar light with screws.
- Adjust the angle, then connect the bracket to the base with screws.
Recommended Installation Height: 8-16FT/2.5-5m
IMPORTANT
- Product is only for outdoor use.
- The installation location of the solar light must be exposed to direct sunlight for a long time and cannot be blocked by any objects, such as leaves, glass.
- Please be careful to keep solar panel clean, no dust, debris or even snow.
FAQ
Q: The solar light doesn’t work
A: 1. Make sure the lamp is switch on.
2. Continuous cloudy and rainy days, the battery is dead. Please wait for the
weather to be clear, the lamp will resume work.
Q: Motion sensor is insensitive
A: The motion sensor is affected by temperature, humidity, and mounting height.
Contact us: support@icofru.com
Documents / Resources
|
ICOFRU XH-SENSORLIGHT Solar Motion Sensor
Light
[pdf] User Manual
XH-SENSORLIGHT Solar Motion Sensor Light, XH-SENSORLIGHT, Solar Motion Sensor
Light, Motion Sensor Light, Sensor Light, Light
---|---