Pyle PEDKITPRO100 Electronic Drum Kit User Guide

 Pyle PEDKITPRO100 Electronic Drum Kit

Please read before using the product
Keep this user guide in a safe place for future reference.
Please assemble PEDKITPRO100 following ASSEMBLY DIRECTORY steps.

Product Features

Enjoy Playing

• Connect the PEDKITPRO100 electronic drum kit to the drum amp.
  adjust the sound level and choose different sound patterns.

• Play quietly with headphones connected.

• Enjoy playing alone and not disturb others.

Simplified Control Panel Design
The PEDKITPRO100 host machine control panel is designed to make everything simple, with only one volume knob, two drum sound switch buttons, and one metronome button.
Metronome Inside
PEDKITPRO100 with a click function, tempo adjustable.
Easy Assembly
Only 8 steps to assemble PEDKITPRO100 electronic drum kit.
Please follow ASSEMBLY DIRECTORY to assemble your drum kit.

ASSEMBLY DIRECTORY

Feet Stands Assembly

Remark : refer to the package details diagram on the carton.
Parts Locations

TOM 1 and TOM 2 Assembly

Install Host Joint

Tom 3, Snare Drum Assembly

Crash, Ride, Hi-Hat, and Drum Sticks Holder Assembly

Hi-Hat Pedal and Bass Drum Pedal

Place the Hi-Hat pedal and bass drum pedal at a proper position.

Host Machine and Audio Cables Assembly

Remark :

1. Connect cables with the host machine first and fasten by crews
2. Pay much attention to the letters on the audio cable head to be matched with the letters on drums or cymbles pads and connect.
3. To avoid unnecessary trouble, please connect cables in order : (1) HHP, BD; (2) CR, RD; (3) HH, T3; (4) Tl, T2; (5) SD

Fine Adjust the Positions and Fix the Cables

Drums Introduction

• Crash Cymbal
  Mark name: CR. 10” diameter. Made from high-quality silicone and plastic.
  Positioned left top of drum kit. Crash cymbal has a mute function.

• Ride Cymbal
  Mark name: RD. 10” diameter.
  Made from high-quality silicone and plastic. Positioned right top of drum kit. The ride cymbal has a mute function.

• Hi-Hat
  Mark name: HH. 10” diameter.
  Made from SD high-quality silicone and plastic. Positioned left of drum kit.

Tom Drum 1, Tom Drum 2, Tom Drum 3
Mark name: T1, T2, T3. 8” diameter. Made from high-quality silicone and plastic.
High technology of shockproof design.

• Snare Drum
  Mark name: SD. 8” mesh pad, with double triggers dynamics induction.

• Bass Drum
  Mark name: BD. The bass drum is designed with only a pedal.

• Hi-Hat Pedal
  Mark name: HHP. Pedal made from high-quality aluminum alloy.
  Play with Hi-Hat to make a reference sound.
  Reminder : Each Mark Name is marked on each pad and cymbal audio port, and also on each audio cable end.

Basic Play Method

This is a brief introduction to how to play with your both hands and both feet.
Play with Hi-Hat and Hi-Hat Pedal

• Stamp down the Hi-Hat pedal, hit Hi-Hat, and make short sounds ‘tzi tzi …’ , refer to Diagram 2.
• Lose the Hi-Hat pedal, hit Hi-Hat, and make the long sound ‘tza…’ , refer to Diagram 3.
• Play with the Hi-Hat pedal alone, to make the different strong or weak sounds of ‘za,tza…’ based on the speed and the strength of each stamp on the Hi-Hat pedal.

Play with the Bass Drum Pedal
Make different bass drum sounds based on the speed and the strength of your each stamp on the bass drum pedal.

Play with Ride Cymbal

• Refer to Diagram 4 tap ping to make the sound of ‘ding, ding…’.
• Refer to Diagram 5 rapping to make the sound of ‘dang, dang…’.
• To mute the Ride Cymbal, use your fingers to press the cymbal edge black area.
• Crash Cymbal can be also muted by the same way, refer to Diagram 6.

Play with Snare Drum

• Refer to Diagram 7 to make the sound of Da, Da …’.
• Refer to Diagram 8 to make the sound of Bang, bang …’. side stick function only by TDX-15S.

Host Machine Introduction

1. Press to turn ON power/Press and hold to turn OFF power.
2. “ VOLUME “: Control the whole drum kit volume.
3. : Metronome ON/OFF.
4. : Choose drum sound patterns. (to adjust tempo and beat when the click is on)
5. “USB”: USB MIDI port (refer to page 18 for details).
6. “AUX”: 3.5mm gauge audio cable input.
7. : 3.5mm gauge earphone output.
8. “OUTPUT” : 3.5mm gauge audio cable output to drum amp.
9. “DC9V” : Connect to DC9V power adapter , negative tip.

How to Use

1. Power and Audio Cable Connection
   Use the attached audio cable to connect the OUTPUT of the host machine to your drum amp. Or, connect your headphones to the earphone port of the Host Machine.
   And then connect the power adapter to the DC9V port of the Host Machine.

2. Turn ON/OFF Host Machine
   Press the button to turn ON the machine. Press and hold the button to turn OFF the machine.

3. Turn ON the Drum Amp (if using a drum amp)
   Turn ON the drum amp and adjust the drum amp volume level. Hit the drum pad in the same time and adjust Host Machine volume control and the drum amp volume control to make a balance.

4. Choose Drum Sound Kit
   The preset drum sound kit is called Rock Kit. Turn the Switch Knob clockwise or anti-clockwise to choose different sound kits.
   Drum kit sound patterns

   • Rock Kit 5 Elec Kit 9 GM Standard
   • Jazz Kit 6 Rock Live 10 GM Room
   • Funk Kit 7 Metal Live 11 GM Power
   • Metal Kit 8 Elec Live 12 Percussion

5. Metronome Function

   • When powered on, press button ” ” into metronome mode, then press to djust the tempo;
   • Under metronome mode, press and hold the button “ ” for 3 seconds to choose the beat mode (presets B-4), now press the button to adjust the beat (1-8);
   • After choosing the ideal beat, press the” ” button, back to tempo adjustment mode, then press “ ” again, back to choose different sound kit modes.

Pedals Adjust and Buttons Patterns Functions

Pedals Adjust
In FLuenced by humidity and temperature, the sensitivity of pedals might be DIFFer. If this happens, use the button pattern to adjust the sensitivity by following steps. When power OFF, press and hold buttons “ +  ” to enter pedal adjust mode. While the screen shows “bdF”, stamp down the bass drum pedal and hold, The “ ” button continuously shows the green color and orange color till the bass drum pedal setup FInished, and release the bass drum pedal. And then the screen shows “HHF”, stamp down the hi-hat pedal and hold, “ ” button continuously shows green color and orange color, and shows red color when the system setup is finished, and then the host machine logs out the pedal adjust mode.

Other Buttons Patterns Functions

1. When powered OFF, press and hold button “ + ” to enter the USB software update function. The screen shows “UPG”, use a USB cable connecting to a computer updating the host machine system.
2. When power OFF, press and hold buttons “ + ” to enter Factory Reset. The screen shows “CLr”.
3. When power is ON, press and hold button “ ” 3 seconds to refer to system version information. For example, if the current version is 1.0, shows “1.0”.

USB MIDI

Connect to your synthesizer or personal computer to play your MIDI music. MIDI (musical instrument digital interface) format list.

MIDI

Specification

California Prop 65 Warning
WARNING:
This product contains Nickel carbonate which is known to the state Of California to cause cancer birth defects and other reproductive harm. Do not ingest.
For more info go to: www.P6Swamings.ca.gov
Reminder : Product information is subject to change without prior notice.

Questions? Issues?
We are here to help!
Phone : (1) 718-535-1800
Email : support@pyleusa.com

FAQs

Does the Pyle PEDKITPRO100 have built-in drum sounds, or can you load custom sounds?

The PED04 typically comes with a sound module that includes a range of built- in drum sounds. Some models may allow for the loading of custom sounds.

Is it possible to connect the PED04 to a computer or other devices for recording or MIDI integration?

Many electronic drum kits, including the PED04, offer MIDI compatibility and can be connected to a computer or other devices for recording and virtual instrument integration.

Does the kit support different drumming techniques and styles?

The PED04 is designed to support various drumming techniques and styles, including playing with sticks and practicing drumming skills.

Is the Pyle PEDKITPRO100 suitable for beginners or experienced drummers?

The PED04 is suitable for both beginners looking to learn and practice drumming and experienced drummers who need a compact practice kit.

What types of sounds can you produce with the PED04?

The PED04 allows you to produce a wide range of drum and percussion sounds, including snare drums, cymbals, toms, and more.

How many drum pads are included in the PED04 kit?

The number of drum pads can vary, but it often includes multiple drum and cymbal pads.

What are the main components of the PED04 drum kit?

The PED04 typically includes drum pads, a sound module, drumsticks, and a drum rack.

What is the Pyle PEDKITPRO100 Electronic Drum Kit?

The Pyle PEDKITPRO100is an electronic drum kit designed for musicians and drum enthusiasts.

What are some alternatives or similar electronic drum kits to consider alongside the Pyle PEDKITPRO100?

Research and compare the Pyle PEDKITPRO100 with other electronic drum kits from different manufacturers to find the one that best suits your needs and budget.

What is the price range for the Pyle PEDKITPRO100 Electronic Drum Kit?

The price of the PED04 can vary depending on the model and its features. It's essential to compare prices from different retailers.

Are there additional features like built-in metronomes or coaching functions?

Some electronic drum kits come with built-in metronomes and coaching functions to help players improve their timing and skills. Check if the PED04 has such features.

What kind of portability and storage options does the kit offer?

The PED04 is often designed to be portable and can be set up and taken down relatively easily. It may also offer options for compact storage.

Video-Pyle Electric Drum Kit

Download This Manual PDF:

Pyle PEDKITPRO100 Electronic Drum Kit User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>