Mehomeli K1 Pro Wireless Headphones User Manual

: June 15, 2024
: Mehomeli

Table of Contents

Mehomeli K1 Pro Wireless Headphones
Product Information
FAQ (Frequently Asked Questions)
Product Overview
Initial Setup and Pairing
Functional Operation
Hearing Protection
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Mehomeli K1 Pro Wireless Headphones

Product Information

Specifications

Model: K1 Pro
Dimensions: 80X100mm
Wireless: Headphones

Product Overview

The K1 Pro wireless headphones are a compact and convenient audio device that allows you to enjoy your favourite music and take calls on the go. With a sleek design and user-friendly features, these headphones provide a high- quality audio experience.

Initial Setup and Pairing

Power on: Long press the Volume + button until the LED indicator turns blue.
Pairing: After turning on the device, it will automatically enter pairing mode (red and blue LED indicators flash rapidly). Go to the Bluetooth menu on your device and choose ‘K1 Pro’. Once a connection has been established successfully, the indicator will turn blue and flash.

Functional Operation

No.	Function	Operation Method	Status
1	Power On	Long press the Volume + for 3 seconds	The blue LED Indicator is

Hearing Protection

When using headphones to listen to music or make calls, it is recommended to use the necessary minimum volume to avoid damaging your hearing. Long-term exposure to loud sounds may cause permanent hearing damage. Listening to high- pitched sounds while driving may also distract your attention and cause accidents.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FAQ (Frequently Asked Questions)

1. How do I pair the headphones with my device?

To pair the headphones with your device, follow the initial setup and pairing instructions provided in the user manual. Make sure Bluetooth is enabled on your device and select ‘K1 Pro’ from the Bluetooth menu.

```
1. How do I adjust the volume?
```

To adjust the volume, use the Volume + and Volume – buttons on
the headphones. Short press Volume + to increase the volume and short press Volume – to decrease the volume. Be aware of the beep sound reminders when reaching the highest or lowest volume levels.

```
1. How do I answer an incoming call?
```

To answer an incoming call, press the Volume + button. The blue LED indicator will flash slowly for 5 seconds, and you will hear a beep sound prompt. You can now start the conversation.

```
1. How do I charge the headphones?
```

To charge the headphones, connect the device to a type-c charger. The device will power off automatically, and the red LED indicator will turn on. Once fully charged, the blue LED indicator will turn on.

1. What should I do if the battery is low?

If the battery is low, you will receive a low-voltage alarm prompt. The red LED indicator will flash quickly, and you will hear a voice prompt every 5 minutes. Connect the headphones to a charger to recharge the battery.

Product Overview

Mehomeli-K1-Pro-Wireless-Headphones-FIG-1

Initial Setup and Pairing

Power on: Long press the Vol + button until the LED indicator turns blue.
Pair: After turning on the device, it will automatically enter pairing mode(red and blue LED indicator flash rapidly).

Get to the bluetooth menu on your device and choose ‘K1 Pro’. Once a connection has been established successfully, the indicator will turn blue and flash.

Functional Operation

No.	Function	Operation Method	Status
1	Power On	Long press the Vol +

for 3 seconds

4

|

Bluetooth Disconnect

| Turn off the device or move the device out of range, and the bluetooth connection will disconnect| Alternating red and blue LED indicators. Voice prompt “Disconnect/pairing”
5| Power Off| Long press the Vol + for 3 seconds| LED indicator power off. Voice prompt “Power off”
6| Reconnect Automatically| Headphone will

re-connect to the device in the connective record

| –
7| Disconnect and power off| The device will power off automatically after 5 minutes if no pairing| The LED indicator goes off. Voice prompt ‘Power off’

8

|

Clear Pairing Record

| In a pairing situation, long press Vol + and Vol – for 2 seconds, and the factory setting will be restored.| Alternating red and blue LED indicators. Voice

prompt ‘Disconnect/pairing’

9| Volume +| Short press Vol +| When the volume is at its highest, there will be a beep beep sound reminder.
No.| Function| Operation Method| Status
---|---|---|---
10| Volume –| Short press Vol –| When the volume is at its lowest, there will be a beep beep sound reminder
11| Pause/Play| Long press Vol – for one second for pause/play| The Blue LED indicator flashes slowly for every 5 seconds.

12

|

Next/Previous Song

| Long press Vol +/Vol – for 2 seconds for the Next/ Previous song| The Blue LED indicator flashes slowly for every 5 seconds. There will be a beep

sound reminder

13|

Incoming Call

|

–

17

|

Charging

| Connect the device to a type-c charger and the device will power off automatically|

Red LED indicator power on

Hearing Protection

When using headphones to listen to music or make calls, it is recommended to use the necessary minimum volume to avoid damaging your hearing.
Long-term exposure to loud sounds may cause permanent hearing damage.
Listening to high-pitched sounds while driving may also distract your attention and cause accidents.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 1 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation

RF warning statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.