Hamilton Beach 19803 Steam Iron User Manual

June 16, 2024
Hamilton Beach

hamilton-logo

Hamilton Beach 19803 Steam Iron

Hamilton-Beach-19803-Steam-Iron-product

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

  1. Read all instructions.
  2. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
  3. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
  4. Only use an iron for its intended use.
  5. To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
  6. Always turn the iron to OFF (O) before plugging or unplugging the iron from the electrical outlet. Never pull on the cord to disconnect the iron from the electrical outlet; instead, grasp the plug and pull on the plug to disconnect the iron.
  7. Do not let the cord touch hot surfaces. Let the iron cool completely before putting the iron away. Loop cord loosely around iron for storing.
  8. Always disconnect the iron from the electrical outlet before filling the iron with water, emptying the water from the iron, and when the iron is not in use.
  9. Do not operate the iron with a damaged cord or in the event the iron has been dropped or damaged or there are visible signs of damage or it is leaking. To avoid the risk of electric shock, do not disassemble the iron. Take it to a qualified serviceman for examination and repair. Incorrect assembly might result in a risk of electric shock when the iron is used after reassembly.
  10. The iron must be used and rested on a stable surface.
  11. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
  12. Do not leave the iron unattended while the iron is connected or on an ironing board.
  13. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down—there might be hot water in the reservoir.
  14. To avoid a circuit overload, do not operate an iron on the same circuit with another high-wattage appliance.
  15. If an extension cord is absolutely necessary, a cord with an ampere rating equal to or greater than the maximum rating of the iron shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.

SAVE THESE INSTRUCTIONS

Parts and features

Hamilton-Beach-19803-Steam-Iron-product-overview

  1. Spray Nozzle

  2. Water Tank Cover

  3. Steam Switch

  4. Spray and Steam Burst Buttons

  5. Auto Shutoff*/ Power ON Light

  6. Soft Touch Grip

  7. Cord

  8. Heel Rest

  9. Temperature Control Dial

  10. Self-Clean Button

  11. Durathon™ Nonstick Soleplate*
    On select models

  12. Retractable Cord*

  13. Cord Wrap*

PRODUCT USAGE

How to dry iron

  1. Turn steam dial off .
  2. Turn temperature control dial to desired temperature. Allow 2 minutes to reach desired temperature.

How to steam iron

  1. Unplug iron. Then, using a measuring cup with a small pour spout, pour tap water into water fill opening and fill iron to MAX Fill line. If you have extremely hard water, alternate between tap water and distilled water for use in the iron. Plug iron into outlet.

  2. Turn temperature control dial to desired setting in the steam range. Allow 2 minutes for the iron to reach the desired temperature.
    CAUTION! Burn Hazard: Attempting to steam iron on a lower temperature setting or failing to allow the iron to preheat for 2 minutes can result in hot water dripping from the soleplate.

  3. Turn adjustable steam dial to desired steam setting.

Care and cleaning

Iron

  1. Turn temperature control dial to OFF (O). Unplug and let cool.
  2. Drain water and secure cord.
  3. Store in an upright position.

Soleplate

  1. Never iron over zippers, pins, metal rivets, or snaps, since these may scratch the soleplate.
  2. To clean buildup on soleplate, wipe with a sudsy cloth. Do not use abrasive cleansers or metal scouring pads.

Limited warranty

  • This warranty applies to products purchased and used in the U.S. and Canada. This is the only express warranty for this product and is in lieu of any other warranty or condition.
  • This product is warranted to be free of defects in material and workmanship for a period of five (5) years from the date of original purchase in Canada and one (1) year from the date of original purchase in the U.S. In addition, the Durathon™ nonstick covering on the soleplate is warranted not to wear out for a period of ten (10) years from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or any component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or component under this warranty to you. If the product or component is no longer available, we will replace with a similar one of equal or greater value.
  • This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120V ~ 60 Hz).
  • We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
  • To make a warranty claim, do not return this appliance to the store. Please call 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada or visit hamiltonbeach.com in the U.S. or hamiltonbeach.ca in Canada. For faster service, locate the model, type, and series numbers on your appliance.

For questions and other information: hamiltonbeach.com hamiltonbeach.ca hamiltonbeach.com.mx

  • USA: 1.800.851.8900
  • Canada: 1.800.267.2826
  • México: 01 800 71 16 100

FREQUENTLY ASKED QUESTIONS

How does the Durathon nonstick soleplate of the Hamilton Beach 19803 Steam Iron contribute to its durability?

The Durathon nonstick soleplate of the Hamilton Beach 19803 Steam Iron is designed to be 10 times more durable than traditional nonstick plates, ensuring smooth gliding over clothes.

What is the significance of the 60% more steam feature in the Hamilton Beach 19803 Steam Iron?

The 60% more steam feature of the Hamilton Beach 19803 Steam Iron enhances its wrinkle removal capabilities, making it highly effective even on stubborn fabrics.

How does the 8-foot retractable cord contribute to neat and easy storage in the Hamilton Beach 19803 Steam Iron?

The 8-foot retractable cord in the Hamilton Beach 19803 Steam Iron conveniently retracts into the base, providing a neat and easy storage solution.

Can the Hamilton Beach 19803 Steam Iron function as a vertical steamer, and how does this feature work?

Yes, the Hamilton Beach 19803 Steam Iron doubles as a vertical steamer, allowing you to steam wrinkles from clothes while they're still on the hanger.

What is the purpose of the 3-way auto shutoff feature in the Hamilton Beach 19803 Steam Iron?

The 3-way auto shutoff feature ensures safety by automatically powering off the iron after 30 seconds on its soleplate or side, and after 15 minutes when propped upright on its heel.

How is the quality of the Hamilton Beach 19803 Steam Iron assured before it reaches the consumer's home?

All Hamilton Beach irons, including the 19803 model, undergo 100% quality testing at the factory to ensure excellent performance and durability.

How does the anti-drip technology in the Hamilton Beach 19803 Steam Iron contribute to its performance?

The anti-drip technology in the Hamilton Beach 19803 Steam Iron prevents dripping during ironing, ensuring a smooth and stain-free ironing experience.

What are the various features that make the Hamilton Beach 19803 Steam Iron suitable for handling tough ironing jobs?

The Hamilton Beach 19803 Steam Iron is fully featured with spray, blast, adjustable steam, vertical steam, auto shut-off, self-clean, and a durable Durathon nonstick soleplate, making it capable of handling tough ironing tasks.

How does the large dial, textured grip, and stable heel rest contribute to the ease of use of the Hamilton Beach 19803 Steam Iron?

The large dial, textured grip, and stable heel rest of the Hamilton Beach 19803 Steam Iron make it easy to adjust temperatures and maneuver the iron comfortably during use.

What is the color of the Hamilton Beach 19803 Steam Iron, and how does it add to its aesthetic appeal?

The Hamilton Beach 19803 Steam Iron comes in a blue color, adding a visually appealing element to its design.

What are the product dimensions of the Hamilton Beach 19803 Steam Iron, and how does its size contribute to its usability?

The product dimensions of the Hamilton Beach 19803 Steam Iron are 12.06 L x 5.79 W INCHES, providing a balanced size for effective ironing while ensuring easy storage.

Can the Hamilton Beach 19803 Steam Iron be used with different frequencies, and what is its frequency compatibility?

The Hamilton Beach 19803 Steam Iron has a frequency compatibility of 50 Hz, making it suitable for use in areas with this frequency.

What is the recommended use for the Hamilton Beach 19803 Steam Iron, and how does it excel in this aspect?

The recommended use for the Hamilton Beach 19803 Steam Iron is for steam ironing, and it excels in providing superior wrinkle removal and neat ironing results.

What is the weight of the Hamilton Beach 19803 Steam Iron, and how does it impact its handling during ironing?

The Hamilton Beach 19803 Steam Iron weighs 3.19 pounds, offering a balance between being lightweight for maneuverability and substantial enough for effective ironing.

Who is the manufacturer of the Hamilton Beach 19803 Steam Iron, and what is their reputation in the market?

Hamilton Beach is the manufacturer of the 19803 Steam Iron. They are known for producing quality home appliances, including irons.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: Hamilton Beach 19803 Steam Iron User Manual

REFERENCE:Hamilton Beach 19803 Steam Iron User Manual- Device.Report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Hamilton Beach User Manuals

Related Manuals