Alsonerbay White Floating Shelves Wood for Wall Storage Installation Guide
- June 15, 2024
- Alsonerbay
Table of Contents
Alsonerbay White Floating Shelves Wood for Wall Storage
HARDWARE
INSTALLATION STEPS
- Step 1:
- Measure the hole distance according to the object, then mark it on the wall.
- Step 2:
- Drill holes at the mark point 5mm drill bit is recommended) and hammer the wall plugs into the holes. (You can use long screws directly on the wooden wall, but for other walls, you need to hammer the wall plug into the hole first, then use long screws)
- Drill holes at the mark point 5mm drill bit is recommended) and hammer the wall plugs into the holes. (You can use long screws directly on the wooden wall, but for other walls, you need to hammer the wall plug into the hole first, then use long screws)
- Step 3:
- Put the screws into the drywall anchors, attention not to completely put the screws into the drywall anchors, about 6-7mm should be left. Then hang the product on the screws which are put into the drywall anchors from top to bottom and pull the product down to fasten it. (This step is to make sure the product is securely fastened with the used screws.)
Note:
- Do not place the product in a place with high temperature, humidity, severe vibration and strong light. Keep the product ventilated and dry.
- Avoid hard objects or sharp objects colliding with the product. Do not hit the surface of the wood to avoid scratches.
- When the product surface gets wet, just wipe it with a dry towel. Do not use detergent-containing chemicals. Do not use acidic liquid to clean. Please keep the product dry.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>