Alsonerbay A4 Tier Floating Shelves Installation Guide
- June 15, 2024
- Alsonerbay
Table of Contents
Alsonerbay A4 Tier Floating Shelves
Parts list
| | | | | | |
---|---|---|---|---|---|---|---
Bracket x 1
| Bracket x 2| Bracket x 1| Bracket x 1| Wood Board
x 4| Short Screw
x 8| Long Screw
x 5|
Wall Plug
x 5
Installation
Step 1
Unfold the product accessories as shown in order to determine the
corresponding assembled position of the accessories. (Note: ensure that the
board is aligned with the bracket and fully clip the board into the groove of
the bracket, and screw it in from the bottom of the board)
Step 2
Connect the bracket A to a wood board as shown in the picture (Kindly note the
90 degree Angle between the bracket and the wood board) and fix with screws.
Connect the bracket B to a wood board as shown in the picture (Kindly nom the
90 degree Angle between the bracket and the wood board) and fix with screws.
Step 3
As the picture shows, install the remaining wood boards and brackets in turn
according to the step 2 method.
Note: The two right-angled edges of the wood boards need to be close and
perpendicular to the wall, so that the boards are parallel to each other, and
make sure the boards are horizontal.
Step 4
- Place the shelf where you want to mount on the wall and make marks according to the holes on the bracket **[1].
**
- Drill holes at the marked points and hammer wall plugs into the holes [2].
Finally, fix the shelves to the wall with long screws [3].
Documents / Resources
|
Alsonerbay A4 Tier Floating
Shelves
[pdf] Installation Guide
A4 Tier Floating Shelves, A4, Tier Floating Shelves, Floating Shelves, Shelves
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>