ISNOW IS-001 Strip Light with HDMI Sync Box User Manual
- June 15, 2024
- ISNOW
Table of Contents
ISNOW IS-001 Strip Light with HDMI Sync Box
IMPORTANT SAFETY INSTRUCTIONS
Read All Instructions Before Use And Save For Future Reference
This is an electric lamp – not a toy!
To avoid risk of fire, burns, personal injury and electric shock it should not
be played with or placed where small children can Reach it
SAVE THESE INSTRUCTIONS
Symbol
Getting to Know Smart Strip Lights
In The Box
Specifications
| Model | IS-001 |
|---|---|
| Power Supply | Light: AC100-240VDC12V 2.0A/12V 3.0A |
Sync Box: AC 100-240V DC 5V 1.5A
Power| Light: 23W Max
Sync Box: 7W Max
LED| 30 pcs / meter
Strip Light Length| 12.5ft / 3800mm
Suitable TV Size| 55-65 inch/ 75-85 inch
HDMI| HDCP 2.2 Video resolution, Support to 4K x 2K@ 60Hz, HDR 10+ /
Dolby Vision
Wi- Fi| 2.4GHz
Supported OS| Android 5.0 or iOS 9.0 and above
BluetoProtocoloth| 4.0 and above
Voice Control| Alexa & Google Assistant
Installing Your Strip Lights
- DO NOT cut the strip light. Avoid bending in the position of LED components so as not to damage or affect the service life of the strip light.
- Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light. Keep it clean and dry.
- Tear off adhesive tape and firmly stick the strip light on (from the bottom left. Reinforce with clips around corners.
- Connect strip light to control box, and then plug in the control box with adapter. Fix with adhesive if necessary.
- Connect control box to sync box, and then plug in the sync box with adapter.
- Connect Apple TV, Blu-Ray player or gaming console to HDMI IN port.
- Connect HDMI OUT port to any output sources such as TV or monitor.
Using Your Smart Strip Lights
Connecting with Smart Device
Make sure your smart device is connected to a secure 2.4GHz network.
- Download “Isnow” from Google Play or Apple App Store and install. Register as instructed.
- Press POWER button once to turn on. Hold until the indicator flashes green to bring it into Pairing mode.
- Open App, follow the on-screen instructions to add your light.
- Select 2.4GHz Wi-Fl network and enter password to complete connection.
Syncing with Input Source
Make sure the sync box is correctly connected to power, control box, input and output sources as instructed before synchronizing.
- Connect sync box to devices and power as instructed.
- Slide ON/ OFF switch to tum the sync box on.
- Press MODE button to select Sync mode.
- Optionally, open App, tap and then select to sync with screen-light strip.
Controlling with APP
To customize your controls, make sure that Sync mode is not selected. You can exit sync mode on APP or by pressing MODE button on control box.
Troubleshooting
The troubleshooting guide addresses the most common problems. If problems persist, feel free to contact the Customer Support at [email protected]
Related to App / Connectivity
| Problem | Solution |
|---|---|
| Cannot enter Pairing Mode (indicator does not flash green). | Press POWER |
button once to turn on. Hold until the indicator flashes green to bring it
into Pairing mode. Once connected, the indicator will stay solid green.
Cannot connect Wi-Fi network/ Wi-Fi connection unstable.| Make sure your
smart device and light are connect ed to the same and secure 2.4GHz Wi-Fi
network.
Make sure you have entered a correct Wi-Fi password and the light is within the signal coverage of the router.
Follow the steps in “Connecting with Smart Device” and try again.
Can others control the strip lights with the APP?| The strip light is controllable by only one user at a time. You can reset it by holding POWER button on control box for 5 seconds until it flashes green and pair it again with another device.
Related to Strip Lights
| Problem | Solution |
|---|---|
| Cannot light up after connecting. | • Make sure the strip light is |
connected according to the arrows on light.
• Check if the control box is properly connected and powered on.
Cannot sync the strip lights with the screen.| • Check all wire
connections. Make sure the light is properly connected with HDMI sync box.
Cannot sync the strip lights with the beat of music.| • Move the
control box closer to the music source.
• Clean the mic on the control box and try again.
Contact us
- Our team will solve your problems in 24 hours.
- [email protected]
- TikTok: @isnowofficial
- Insta: @isnowofficial
- FB: @Isnow official
- Twitter: @isnow official
Download the ISNOW APP to join us!
By scanning the QR code to download the APP, you can control the color and mode of the box and the light strip.Here! You can share your using experience of ISNOW and meet like-minded friends.
Questions or Concerns?
- [email protected]
- Shenzhen Jike Zhilian Technology Co .• LTD
- Room 101 B, Building 1. Dezhong E-commerce Industrial Park, No. 7, Lipu Street, Data Community. Bantian Street, Longgang District. Shenzhen
- E-mail: [email protected]
- Web: www.isnowhome.com
Made in China