Henkion S21 Wearable Breast Pump User Manual

June 15, 2024
Henkion

Henkion S21 Wearable Breast Pump

Read this user mannual carefully before using your electric breast pump, and save the user manual for future reference.

Overview

Parts list

  1. Silicon shield x1
  2. Pump motor x1.
  3. Silicone diaphragm x1
  4. Type C – cable x1
  5. Milk collector x1
  6. Bra adjustment buckle x1
  7. Duckbill Valve xl

Control panel

  1. Expression mode
  2. Massage mode
  3. Auto mode
  4. Level up button
  5. Power button/Mode selection button
  6. Level display
  7. Battery display
  8. Time display
  9. Time/minute
  10. Level down button

Note
This product has a built-in Ii-Ion battery. when the battery md,cator shows one bar flash, we recommend that you use a certified SV=lA adapter to charge the pump motor as soon aspossible

Cleaning and sterilizing

For the first time and before each use, you must disassemble, wash, and sterilize all the breast pump parts that come into contact with breast milk except the silicone parts (valve, diaphragm and silicone funnel).

Operation Cautions

  1. Never wash or sterilize the pump motor, the silicone tube. the cap, and the power adaptor. These components do not come into with your breast milk.
    You can wipe those parts clean with a soft cloth.

  2. Take care when cleaning the valve and the silicone diaphragm. If it gets damaged, your breast pump will not function properly.

  3. To clean the valve. rub it gently between your fingers in warm soapy water.
    Do not Insert objects as this may cause damage_

Assembling

  1. Put the silicone diaphragm into the Milk collector , and press it with your hands to make the edges fasten tightly to ensure a perfect seal.

  2. Put the Silicone shield into the breast Milk collector and pressit with your hands to make the edges tightly fastened. Make sure to install it in the correct direction.

  3. Install the pump motor on the breast milk collector to ensure that it fits perfectly with the breast milk collector.

  4. Connect the type-c charging cable to charge the battery.

Note
The power adapter Is a common standard accessory on the market. This product Is not provided and can be purchased separately if necessary.
Power adapter specifications SA =lA

TO begin pumping

  1. Press the silicone funnel firmly against the breast, leave no gaps and make sure your nipples are centered. Keep it upright. Be careful not to distort the position of the product and the chest, otherwise the breast pump will not have suction.

  2. Lightly press the power button to start the breast pump, and the timing display turns on.

  3. Short press the “ ” power button to switch the expression mode, “ “. There are 12 levels in this mode. You can press the” ” and button to select the suction power that makes you comfortable.

  4. Short press the “ ,” power button to switch to the massage mode” “· there are 12 levels in this mode. You can press the” ” and ” ” button to select the suction power that makes you comfortable.

  5. Short press the power button” ,” to switch to the automatic mode “ “. There are 12 levels in this mode. Levels 1-6 are massage mode” “· and levels 7-12 are expression mode” “· The range of automatic upshift is 1-9 levels and, interval between upshifts is 20 seconds. 10-12 levels need to be adjusted manually. During the upshifting process, you can select, you can select the suction power that makes you comfortable by pressing the” ” and” ” button.

  6. Long press the power button “ ,” to turn off the breast pump.

Tip: This product has a built-in memory function, when you turn it on again, the machine will automatically rise to the working mode and suction style you used last time.
After pumping, press the power button to turn off the breast pump, and then carefully remove the breast pump from breast.

Sitting position while pumping

Relax the body, sit in a comfortable chair and lean slightly forward (use cushion to support back). Make sure to keep the breast pump and milk collector upright.

Duckbill Valve Installation Instructions

Insert the raised part of the duckbill valve into the round hole at the bottom of the suction bowl groove of the bra.

Instructions for bra adiusting buckle

Adjusting the length of bra straps, makes pumping more comfortable. One end of the bra adjustment buckle hung on the inside buckle of nursing bra.
Adjust the length of the bra buckle according to your preference.

Instructions for pouring milk

After you finish pumping, please remove the breast pump from the breast, keep the breast pump upright and remove the motor part, hold the milk collector to pour the breast milk into the bottle, make sure the milk collector gap of the breast cup is aligned with the mouth of the bottle to prevent breast milk spilled.

Storing your breast milk

Storing breast milk

1. Only store breast milk collectec by sterilized breast pumps.
2. The suckec milk can be placed in a clean and sterilized milk storage bag or a milk bottle with a sealing cushion, and immediately placed in the refrigerator to refrigerate or freeze.

Breast milk cold storage

  1. Do not freeze breast milk repeatedly.
  2. Do not mix fresh breast milk with frozen breast milk.
  3. Be sure to discard the breast milk left after feeding.
  4. The extracted milk can be refrigerated in the refrigerator for 48 hours (inside the refrigerator). or frozen in the freezer for three months, and the milk bottle or milk storage bag can be affixed with a label clearly marking ‘the milking date and time.

Unfreeze breast milk
Place the frozen breast milk in the refrigerator compartment Far one night to thaw. In an emergency, you can use a bowl of hot water to thaw breast milk.After thawing breast milk, it must be consumed within 24 hours.

Breast milk heating

  1. Erect the baby bottle in a bowl of hot water or heat the breast milk safely and quickly with a baby bottle and food heater .
  2. Keep in mind! Before feeding your baby, be sure to check the temperature of breast milk.
  3. Do not use a microwave oven to heat breast milk, because this may destroy important nutrients and antibodies.
  4. In addition, uneven heating may cause partial overheating of the liquid, which may cause burns.
  5. Do not immerse the milk storage bottle in boiling water to heat itto prevent it from rupturing or cracking.

Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals