LANDMARK LM BH137 Wireless Bluetooth Neckband User Guide

June 15, 2024
Landmark

LANDMARK LM BH137 Wireless Bluetooth Neckband

LANDMARK LM BH137 Wireless Bluetooth Neckband

Headset Overview

Headset Overview

Make sure your Bluetooth headset is equipped with the following items USS charging cable, Bluetooth headset, earmuffs and instruction manual

Specification

  • Bluetooth version : 5.0
  • Standby time : about 2100 hours
  • Transmission distance : 10M
  • Music time : 15 hours
  • Talk time : about 17 hours
  • Battery capacity : 21o mAh
  • Charging time : about 45 minutes
  • Searching Code : LM PLAY

Open the Bluetooth Headset

  • Power on : long press the multi-function keys for about 2 seconds, blue light flash 3 times;
  • Power off : long press multi-function keys for about 4 seconds, red light flash 3 times off;
  • Pairing : long press the multi-function keys for about 5 seconds, red and blue lights alternately flash, enter matching state
  • Answer / hang up : Click the multi function key can answer the call or hang off the call;
  • Reject calls : long press multi-function keys;
  • Song / pause : click the multi-function key;
  • Voice dialing : long press multi-function keys for about 2 seconds;
  • Redial : Double-click the multi-function key;
  • Voice switch : click the volume + , – key at the same time in standby condition.
  • Low battery remind : every 20 seconds flash red light
  • Out of the connection range off remind : standby flashing blue light
  • Charging condition : long red light;
  • Full of battery : long bright blue light;

Headset Pairing

  1. Press and hold the multifunction key for 5 seconds, at this time the indicator light red and blue flash. shake reminders 1, headphones into the match pair status.

  2. Turn on your phone bluetooth function. search for the model name of headphones, then click it will automatically connect.
    Compatible with Bluetooth on the market 98% of digital products.

In the standby process, double-click the multi-Function key, then can last number redialing. later use, only press multi-fuction key 2 seconds then turn on (blue light flash 3 time).
it will automatically connect with last time Succeed match phone.

Disconnect the headset from the phone:

To disconnect the headset from the phone {For example, connect your phone to another Bluetooth device), use one of the following:
Turn off headphones:

  • Use the phone’s Bluetooth function to disconnect the
  • headset from the phone
  • Move the headset to a distance of 10 M (about 30 feet) away from the phone

Connect two phones

A drag two functions, the first pair of connected to the first mobile phone, and then turn off the headset new entry match, with second mobile phone connection pairing finished in the first one phone Bluetooth settings inside the click on the headset, the headset will also connect two mobile phone.

Headset Charging

Headset built-in rechargeable battery. before using the headset for the first time, we recommend first the headset is fully charged. when charging. the indicator light is red, the battery is full when the red the color indicator will be converted to blue long.
Note : Please use the original charge with the charge, the charging voltage can not be higher than 5V!

Headphones to wear

According to the specific location of wearing headphones, the corresponding slightly adjustable ear sets.

Troubleshoot

Heard the sound of [Kaka]

  • Because the Bluetooth agreement is open from the open location, accessible circumstances can reach to 10 M, in which the human body is also the largest in terms of Bluetooth headset dry we recommend that you put your headphones on the same side of your phone to achieve the best results.

Does the machine have no sound?
Make sure the headset is activated and fully charged.

Phone and headset is not connected?

  1. Make sure the headset is matched to the phone.
  2. Make sure your phone Bluetooth device is enabled.
  3. Make sure the headset is within 10 meters of the phone and not any obstructions. such as walls or other electronic equipment.

If the above steps do not resolve the issue, try the following:
A , re-charge the headset.
B , restart the phone.
C , start the phone Bluetooth and delete the previous pairing history!
D , the Bluetooth headset to re-match with the phone!

Precautions

  1. Do not place this headset in the position of the airbag inside the vehicle when the airbag pops up, it may cause serious injury.
  2. Do not let children play the headphones, small parts may make children have the risk of suffocation.
  3. Hospitals, blasting sites or places where potentially explosive atmospheres may be ask the user to turn off the electronic equipment and radio. when you enter a specific area please pay attention to the instructions.
  4. Before boarding, please turn off the headset, to the aircraft can not use the headset.
  5. To better protect your hearing, do not adjust the volume too loud.
  6. Do not attempt to make any modifications or disassembly of this headset.
  7. Do not use this product in wet or rain.
  8. Do not clean the headphones while in the charging state. should first headphones and the charger separately, and then clean up.

* Please provide this warranty card when accepting the service, please keep it safe!

Logo

Documents / Resources

| LANDMARK LM BH137 Wireless Bluetooth Neckband [pdf] User Guide
LM BH137 Wireless Bluetooth Neckband, LM BH137, Wireless Bluetooth Neckband, Bluetooth Neckband, Neckband
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals