HKoenig joe48 Metal Table Fan Instructions

: June 15, 2024
: HKoenig

Table of Contents

joe48 Metal Table Fan
PLEASE READ INSTRUCTIONS CAREFULLY
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION
SECURITY GUIDE
CLEANING
TECHNICAL INFORMATION
ENVIRONMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Metal table fan
joe48
Instruction Manual

joe48 Metal Table Fan

HKoenig joe48 Metal Table Fan - QR code https://www.hkoenig.com/s/44000_316580_ventilateur-de-table-metal

PLEASE READ INSTRUCTIONS CAREFULLY

BEFORE OPERATING
Sleek & modern high-velocity fan provides more powerful wind than ordinary plastic fans. Draws air off the floor and circulate through the entire room keeping room cool and breezy. Put near the windows and it helps exhaust hot indoor stuffy air and pulls in fresh outdoor air.

Energy-saving, high velocity motor for maximum air circulation
Tilt-adjustment for flexible use
Triple speed selection
Precision fan blades for powerful wind but low-noise

Chrome-stand, solid construction with thermal- protection to prevent motor overheat. HKoenig joe48 Metal Table Fan - parts

1. Motor unit
2. Oscillation knob
3. Rear guard
4. Fixation screws for rear guard
5. Blade fastening screw
6. Blade| 7. Grill locking screw
8. Front guard
9. Grill locking nut
10. Speed control switch
11. Connecting screws
12. Base
---|---

IMPORTANT SAFETY INSTRUCTIONS

Only use the fan under the conditions described in this manual. Any other use is not recommended and may result in fire, injury, or electric shock.
This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge provided they have received supervision or instruction in the safe use of the appliance and understand the hazards involved. Children should not play with the device.
The appliance is not intended to be operated by an external timer or by a separate remote control system.
This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved.
Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
Keep the appliance and its power cord out of
reach of children under 8 years of age.
When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
Make sure that the voltage rating on the typeplate corresponds to your main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit
Never leave the unit unattended while in operation.
Please keep this document at hand and give it to the future owner in case of transfer of your device
The device is not intended to be operated by external timer means or a remote control system
Do not use the appliance if it has a damaged cord or plug, if it is not working properly, if it has been damaged or dropped. If the power cable is damaged, it must be replaced by the manufacturer or his agent or by a qualified person to avoid any hazard.
Children should be supervised to make sure they do not play with the device.
Cleaning and maintenance of the appliance must not be done by a child.
Never remove the cover before unplugging the unit.
The device must not be used if it has dropped, if there are visible signs of damage.
Unplug the appliance if it is not used.
Do not use the fan near a gas or fire source, in a very humid, hot or unstable environment.
Never put your fingers in the protective grilles or touch the moving parts of the appliance.
Do not use the unit with a speed control system.
Young children, the elderly or the suffering should not be exposed directly to the blower for a long time.
Make sure the fan is always on a flat, dry and stable surface.
NEVER COVER THE APPLIANCE, even temporarily, as it may overheat and create a fire hazard.
Your appliance has been designed for domestic use only. It is not intended for use in the following situations which are not covered by the warranty:
– in staff kitchen areas in shops, offices and other professional environments,
– in farm hostels,
– by guests in hotels, motels and other residential environments,
– in bed and breakfast type environments.

OPERATING INSTRUCTIONS:
a) Ensure voltage used corresponds with the voltage indicated.
b) Turn the speed control to selected speeds: 0(off) and speedsⅠ, Ⅱ, Ⅲ is Slow, Middle, Fast.
c) Tilting angles-By pushing the tilt-guard, you can adjust the fan to any elevation preferred.

INSTALLATION

HKoenig joe48 Metal Table Fan - parts1 Step-1: screw out the 4pcs screws from the fan motor housing
Step-2: put the rear fan guard touch the fan motor housing, screws the screws back to lock the rear fan guard
Step-3: insert the fan blade into the motor shaft,
Step-4: tight the screw to control the fan blade HKoenig joe48 Metal
Table Fan - parts2 Step-5: Put the front fan guard on the rear fan guards, put back the clips to control the fan guards well (at the bottom of the fan guard, there is a safety screws, install it into the rear fan guard hole and tight it)
Step-6: Contact with the electrical for using

SECURITY GUIDE

Never touch the blades with hand or any object!
Do not pull the cord too hard. If damaged after pro-long use, get it repaired by any electrical repairman
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

CLEANING

To clean: Disconnect the power cord from the mains. Remove the guard and the blades carefully. Do not drop the blades! First use soft cloth with light soap to clean off oil stains. Then wipe and polish with dry cloth. Never use polish or any corrosive liquid that will damage the paint, metal or plastic! Put back the blades and lock the guard securely before use.
NO exchange will be entertained if the above instructions are not followed. Always Test the product first before purchase.

TECHNICAL INFORMATION

Operating Voltage: 220-240V~ 50Hz
Power Consumption: 35W
WARRANTY
The warranty period for our products is 2 years, unless otherwise stated, starting from the date of initial purchase or the date of delivery.
If you have any problems or questions, you can easily access our help pages, troubleshooting tips, FAQ, and user manuals on our service site: https://sav.hkoenig.com.
By typing the reference name of your device in the search bar, you can access all available online support, designed to best meet your needs.
If you still cannot find an answer to your question or problem, then click on “Did the answer solve your problem?”. This will direct you to the Customer Support Request Form, which you can fill out to validate your request and get help.
WARRANTY CONDITIONS
The warranty covers all failures occurring under normal use, in accordance with the usage and specifications in the user’s manual.
This warranty does not apply to packaging or transportation problems during shipment of the product by the owner. It also does not include normal wear and tear of the product, nor maintenance or replacement of consumable parts.
EXCLUSION OF WARRANTY
– Accessories and wearing parts ().
– Normal maintenance of the device.
– All breakdowns resulting from improper use (shocks, failure to comply with power supply recommendations, poor conditions of use, etc.), insufficient maintenance or misuse of the device, as well as the use of unsuitable accessories.
– Damage of external origin: fire, water damage, electrical surge, etc.
– Any equipment that has been disassembled, even partially, by persons other than those authorized to do so (notably the user).
– The products whose serial number would be missing, deteriorated or illegible that would not allow its identification.
– The products subjected to leasing, demonstration, or exhibition.
() Some parts of your device, called wear parts or consumables, deteriorate with time and frequency of use of your device. This wear and tear are normal but can be accentuated by poor conditions of use or maintenance of your device. These parts are therefore not covered by the warranty.
The accessories supplied with the device are also excluded from the warranty. They cannot be exchanged or refunded. However, some accessories can be purchased directly through our website: https://sav.hkoenig.com/.

ENVIRONMENT

CAUTION: Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.

Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com
https://en.hkoenig.com
Tél: +33 1 64 67 00 05