HKoenig GRD830 Coffee Grinder Instruction Manual

: June 15, 2024
: HKoenig

Table of Contents

HKoenig GRD830 Coffee Grinder
SAFETY INSTRUCTIONS
ADJUSTING THE GRIND LEVEL
CLEANING AND CARE
TROUBLESHOOTING
PARTS & ACCESSORIES
WARRANTY
ENVIRONMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HKoenig GRD830 Coffee Grinder

HKoenig-GRD830-Coffee-Grinder-PRODUCT

Specifications

Model: GRD830
Product: Coffee Grinder

Safety Instructions

Before using the appliance, ensure that all users are supervised or instructed in the safe use of the appliance and fully understand the potential hazards. This appliance is suitable for use in various environments such as kitchen areas in shops, offices, farmhouses, hotels, motels, and guest rooms.

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should be observed, including the following
Make sure that your output voltage corresponds to the voltage stated on the rating label of the appliance.
If the appliance orbits power cord has been damaged, it must be repaired or replaced by the manufacturer, a service technician, or a similarly qualified person, to prevent hazards.
Before cleaning the appliance, be sure that it has cooled completely and that it is unplugged from the outlet.
To protect yourself from electric shock, do not immerse the power cord, plug, or appliance in water or other liquids.
Misuse of this appliance may result in severe personal injury.
Always unplug the unit prior to assembly, after use, before cleaning, and in the event of any malfunction.
Always unplug the unit before opening the bean or collection container and before removing either from the housing.
This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge, provided that they are supervised or instructed in the safe use of the appliance and that they fully understand the potential hazards.
Before each use, check the appliance, its power cord, and its attachments for any defects. If the appliance has been dropped or if excessive force has been used to pull the power cord or plug, then the appliance should not be used because even invisible damage may have adverse effects on the operational safety of the appliance.
The appliance and its cord must never be placed near or on top of hot surfaces such as a radiators, ovens, gas burners, open flames, etc.
Never operate the appliance when it is empty (i.e., without coffee beans).
When unplugging the unit, always grip the plug itself. Do not jerk or pull the power cord.
Do not allow the cord to hang over the edge of the counter or table.
This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved.
Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
Keep the appliance and its power cord out of reach of children under 8 years of age.
When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
• Make sure that the voltage rating on the type plate corresponds to your main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit
• Please keep this document at hand and give it to the future owner in case of transfer of your device
• Never leave the unit unattended while in operation.
• The device must not be used if it has been dropped, it obvious signs of damage are visible or if it has leaks.
• This appliance is intended for use in domestic and similar applications such as
– kitchen areas in shops, offices and other working environments
farmhouses
in hotels, motels and other residential environments
guest rooms.

IMPORTANT NOTE

This appliance is designed for short-term operation only. It should not be operated continuously for more than 2 minutes. Turn off the appliance after 2 minutes of use and allow the motor to cool down for 10 minutes before turning it on again.

BEFORE FIRST USE

Before initial use of this appliance, the grinding mechanism, grinding ring, bean container, and collection container should be thoroughly cleaned. For cleaning instructions, see the “Cleaning and Care” section.

ADJUSTING THE GRIND LEVEL

The coarse/fine adjustment knob allows for setting the grind to your liking with 16 adjustable grind settings
1-3: Extra Fine, ideal for espresso or Turkish coffee
4-7: Fine to Medium, ideal for coffee from automatic coffee makers
8-16: Medium Coarse to Extra Coarse, ideal for pour-over, French press, or cold brew coffee

NOTE : These are approximations meant for guidance. Appropriate settings may vary according to personal preferences.

To prevent beans from getting caught in the grind mechanism and possibly jamming the motor, always set the grind level before putting the beans into the container. If the beans have already been put into the container, the grind level should only be changed while the motor is running.

LOADING THE COFFEE BEANS

To insert the bean container, line up the side plastic indents with the holes on the grinder. Then, twist the knob 90° clockwise to lock it shut.
With the lid of the bean container removed, load the desired amount of beans inside. Then, replace the lid. The maximum capacity of the bean container is 14 ounces (400 grams).

SELECTING THE GRIND TIME

Use the grind time selection knob to set the length of grind. The length can be set between 1 and 50 seconds and corresponds with the amount of ground coffee produced. Any amount from 2 to 10 cups can be processed in a single cycle.
Since different types of coffee and other factors such as cup size and your personal preference may require different grind settings, we recommend that you try out whatever setting suits your personal taste.
The maximum capacity of the collection container is 8.5 ounces (240 grams).
CAUTION : Always make sure that you empty the collection container, because an overfull container may cause blockage.

GRINDING THE BEANS

NOTE : If making espresso and using a portafilter, follow the instructions in the next section, “Using a Portafilter”.
Ensure that the collection container lid is properly fitted before attaching the container itself to the main unit.
Plug in the appliance, and then press the on/off button.
The grinding process stops automatically when the selected amount of ground coffee has been produced. The process can be stopped at any time by pressing the on/off button again.
When grinding has finished, unplug the appliance and wait until the motor has come to a complete stop before removing and opening the collection container.
NOTE : To ensure optimum coffee flavor, only the required amount of beans should be ground immediately before brewing. Any excess ground coffee should be stored in an airtight container.

USING A PORTAFILTER

Pick the appropriate holder (large or small) for your portafilter. Position the portafilter holder under the grind mechanism. Slide and lock it into place. Then, slide your portafilter into the holder.
Press the portafilter into the black button on the wall of the grinder to begin. Hold until satisfied with the amount of espresso, and then release.
NOTE : There is no need to press the on/off button on top of the unit when using a portafilter. The portafilter button starts the grind on its own.

CLEANING AND CARE

Before cleaning the appliance, always unplug it and wait until the motor has come to a complete stop.
To protect yourself from electric shock, do not clean the housing or the power cord with water or other liquids, and do not immerse them in water or other liquids.
Wipe the housing with a slightly damp, lint-free cloth and dry it thoroughly.
Do not use abrasives, harsh cleaning solutions, or hard brushes when cleaning this appliance.
Remove the collection container and its lid, and clean them with a mild detergent. Ensure they are thoroughly dry before putting them back on the grinder.
The bean container should only be removed after any remaining beans have been emptied. To remove the bean container, first turn the knob 90° counterclockwise. After it clicks, lift up the container. Rinse the container and lid and dry thoroughly. When replacing the
container, make sure it is aligned with the insert as described in the “Loading the Coffee Beans”. Then, turn the container clockwise to lock it.
The grinding mechanism can be opened for cleaning or in the event of malfunction. Remove the container as described above and take out the grinding ring. Use a small, soft brush to clean the grinding mechanism and the ring. Use caution, as the grinding assembly
and ring have sharp edges. When inserting the grinding ring, ensure that the teeth on the ring fit into the corresponding recesses on the mount for the grinding mechanism. With the ring inserted, you should be able to move it slightly but not turn it.
The wind-up power cord storage underneath the base helps limit the length of the power cord during use and makes it easy to store the appliance.

TROUBLESHOOTING

Ground coffee spills from the collection container. This is abnormal occurrence, and static charge is usually the cause.
The beans are not being ground, and the grinder makes a high-pitched squealing sound. Because of their particular shape, beans might get jammed inside the grind mechanism. Set the grind adjustment to position 1 and unplug the unit. Stir the beans with a spoon to free those that are caught in the mechanism.
The motor does not start or makes abnormal noises as if running under a heavy load. The grind mechanism is choked or blocked. Unplug the unit immediately and clean the mechanism as described in the “Cleaning and Care” section.

PARTS & ACCESSORIES

HKoenig-GRD830-Coffee-Grinder-01

WARRANTY

The warranty period for our products is 2 years, unless otherwise stated, starting from the date of initial purchase or the date of delivery.
If you have any problems or questions, you can easily access our help pages, troubleshooting tips, FAQ, and user manuals on our service site: https://sav.hkoenig.com.
By typing the reference name of your device in the search bar, you can access all available online support, designed to best meet your needs.
If you still cannot find an answer to your question or problem, then click on “Did the answer solve your problem?”. This will direct you to the Customer Support Request Form, which you can fill out to validate your request and get help.

WARRANTY CONDITIONS

The warranty covers all failures occurring under normal use, in accordance with the usage and specifications in the user’s manual.
This warranty does not apply to packaging or transportation problems during shipment of the product by the owner. It also does not include normal wear and tear of the product, nor maintenance or replacement of consumable parts.

EXCLUSION OF WARRANTY

Accessories and wearing parts (*).
Normal maintenance of the device.
All breakdowns resulting from improper use (shocks, failure to comply with power supply recommendations, poor conditions of use, etc.), insufficient maintenance or misuse of the device, as well as the use of unsuitable accessories.
Damage of external origin : fire, water damage, electrical surge, etc.
Any equipment that has been disassembled, even partially, by persons other than those authorized to do so (notably the user).
The products whose serial number would be missing, deteriorated or illegible that would not allow its identification.
The products subjected to leasing, demonstration, or exhibition.
Some parts of your device, called wear parts or consumables, deteriorate with time and frequency of use of your device. This wear and tear are normal but can be accentuated by poor conditions of use or maintenance of your device. These parts are therefore not covered by the warranty.
The accessories supplied with the device are also excluded from the warranty. They cannot be exchanged or refunded. However, some accessories can be purchased directly through our website: https://sav.hkoenig.com/.

ENVIRONMENT

CAUTION

Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France www.hkoenig.com – https://en.hkoenig.com – Tél: +33 1 64 67 00 05