MIWAT B0B7NBXQDQ 20W Plug in LED Motion Sensor Flood Light Instruction Manual

: June 15, 2024
: MIWAT

Table of Contents

INTRODUCTION & WARRANTY:
Installation Diagram
INSTALLATION INSTRUCTION:
COVERAGE RANGE:
FUNCTION:
TEST:
How to contact a seller using the product listing page **
How to connect through the Orders page
Technical Data:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MIWAT B0B7NBXQDQ 20W Plug in LED Motion Sensor Flood Light Instruction Manual

INTRODUCTION & WARRANTY:

Thank you for selecting and buying MIWAT product. MIWAT will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect install actioner abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours away would void the warranty. This product is warranted for manufacturing defects only.

WARNING!

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Minimum distance from protective shield. ke lighted objects 1m.

NOTE : Avoid installing the light near air temperature zones such as air condition, central heating etc

Caution , risk of electric shock.

Installation Diagram

INSTALLATION INSTRUCTION:

DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERATURE RANGE.
Please do not mount to a surface that is prone to vibrations.
Switch on the power and test if the light is working properly.
Remove the screw which is for mounting the bracket for the fixture. Remove the bracket.
Mark the hole position for fixing bracket onto the wall. Drill onto the wall at the marked positions .
Mount the bracket back to the fixture. Adjust the floodlight to desired position and tighten the screw of fixing bracket.
Adjust the irradiation angle according to the condition of usage.

COVERAGE RANGE:

Walking Towards
Walking across

FUNCTION:

LUX Setting: Can Identify day and night. The consumer can adjust the work ambient light. It can work during the daytime and at night when adjusted to the “sun” position (max). It can work in the ambient light less than 5LUX when it is adjusted on the “moon” position (min).
SENS adjustable: For low sensitivity with 1M(3.28FT) for detection distance set the SENS knob to (-); for High sensitivitywith6M(19.69FT) set the knob to (+).
Time-Delay is added continually: When it receives the second Induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest. Time-Delay is adjustable. It can be set according to the consumer’s desire. The minimum-time is 3s. The maximumis7 min.

TEST:

Turn the SENS knob clockwise on the maximum (+). Turn the Time no bantam-clockwise on the minimum(-). Turn the LUX knob dockize on the maximum(sun).
When you switch on the power, the light will be on at once, and 3-30 second slater will be off automatically. Then if the light receives induction signal, it can work normally.
After 10 seconds of the first detection, the light could work again. If the reis no induction signal, the load will stopped working within 10 seconds.
Turn the LUX knob anti-clockwise to minimum. If it is adjusted to 5LUXtheload and the sensor should not work when testing in daylight. If you cover the detection window with opaque object such as towel etc, the load will work. Under no induction signal the load will stop working within 10 seconds.

Note : When testing in daylight, please turn the LUX knob to (SUN) position, otherwise the sensor lamp will not work. In front of the detection window please ensure there is no hinder or unrest objects effecting the detection.

How to contact a seller using the product listing page **

**

The product listing page is perfect for contacting sellers before placing an order. Although, you can also use it after making a purchase. To start, gotoAmazon.com, find a specific product, and speak to the seller. Alternatively, if you have a specific seller in mind, you can navigate to their storefront if they have one and find the product from there.

After locating the product, click the seller’s name on the right-side panel. You’ll find it next to Sold by and under the Buy Now button. In the Amazon app, you’ll need to scroll down to find the seller’s name. It’ll automatically take you to the seller’s information and contact page.
Select the yellow Ask a question button on the seller’s page to go to the Seller Messaging Assistant.
Follow the prompts in the chat window, selecting the appropriate options relating to your question. A message box appears where you can type your question and attach files.

How to connect through the Orders page

If you’ve already placed an order and are having issues with it or if you wish to contact the seller regarding the item, the Orders page is a good place to start.

Go to Amazon.com and log in to your account.
Select Returns & Orders on the top-right corner of the screen. On the Amazon app, tap the hamburger icon in the bottom-right corner of the screen and select Orders. The Your Orders page opens.
Find the order in question and click the yellow Problem with order or Get.
help with order button, whichever is available. These buttons appear if the third-party seller is yet to deliver your order.
After choosing the appropriate option, follow the prompts to report your problem.

If your order has been delivered, you can request a return, exchange, or refund by clicking the Return or replace items button. And if the seller handles these transactions, Amazon will connect you with them. You can also rate the seller or drop a comment about your shopping experience using a Leave seller feedback button. This option is available for up to 90 days after the date of your order.

Technical Data:

Power Requirement: 110V
Lighting Load: 20W
Detection Range: 120°
Detection Distance: 2-8 M (6~26 FT, <24° C)
Swiveling Angle : Lamp Part: Vertical 90° ;Sensor Part: Horizontal 50° ,Vertical 40°
Mounting Height : Recommended 1.8 ~ 2.5M (5.9 ~ 8.2 FT) Wall Mount
Time Adjustment: 3 sec ~ 7 min
Lux Adjustment: Approx. 0 ~ 1,000 Lux.
Working Temperature: -20° C ~ +40° C
Working Humidity: <93% RH
Floodlight Protection Rating :IP65
PIR Protection Rating : IP44