NCOEN 21v-2 Battery Chainsaw Instruction Manual
- June 17, 2024
- NCOEN
Table of Contents
3 ASSEMBLY PARTS
SAW BLADE INSTALLATION
WARNING
The saw chain is very sharp.
To ensure safe operation, please wear thick protective gloves.
-
AIm the protective plate at the holeof the machine and tighten it
-
Install the chain on the guide plate be attention that the chain little pinion should be in front as shown in the figure. Please note that it will result in inability to cut if the chain installed in the wrong direction
-
After the saw chain is just sleeved on the guide plate, install the guide plate to the power unit at normal direction. Adjust the position of the chain tensioner bolt on the right side plate to align it with the lower hole of the guide rod.
Pay attention to the blade edge outward as shown in the figure
-
Put on the cover, and tighten the screw at below to adjusting the chain.
-
After adjusting the chain,Fasten the guide plate cover and tighten the screws lightly to fix the guide plate cover Please note that it is normal for the chainsaw to slip after longtime using, twisting too tightly or too loosely may cause the chain to slip too. You just need twist the screws to achieve the appropriate tension when the chain saw jumps out
-
Insert along the power unit, and fasten it when you hear a “click” sound, and the whole machine is installed. Be attention that please fill the oil tank and fully charger the battery when you first time to use If there are any questions about the products, please feel free to contact us we can provide installation videos and will help you to resolve the problem step by step
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>