iGear iG-953 Crystal Wireless Earbuds User Manual
- June 15, 2024
- iGear
Table of Contents
iG-953 Crystal Wireless Earbuds
User Manual
iG-953 Crystal Wireless Earbuds
INSTRUCTION MANUAL
Please read these instructions carefully and retain for future reference
HIGHLIGHTS
- True Wireless Technology
- Hands-Free Calling
- Touch Control
- Transparent case design.
- Case Gives up to 30 Hours of Playtime
- Compatible with Siri and Google Assistant
PACKAGE CONTENTS
- Gear Crystal Earbuds
- Charging Case
- Type-C Charging Cable
- 3 X Spare Extra Ear tips
- Silicone case with string
- Instruction Manual
SPECIFICATIONS
-
Bluetooth
Profiles: A2DP/HSP/HFP
Version: 5.2+EDR
Chipset: JL
Distance: 10 m -
Earphones
Playtime: Up to 6~8 Hours*
Battery Capacity: 2×50 mAh
Sensitivity: 85 dB
Driver: 14mm
Impedance: 32 Ω
Frequency Response: 20 Hz~ 20 kHz -
Charging Case
Charge Input: 5V DC, 1A
Battery: 320 mAh
Number of Recharges: 4
Charging Time: 1 Hour
INSTRUCTION FOR USE
CHARGING THE CHARGING CASE
- Please ensure that the battery is fully charged before using the device for the first time.
- Connect the provided Type-C charging cable to the charging slot on the case, connect the other end of the USB to a wall charger.
- The digital lights on the LED screen will pulse to indicate that charging has begun
Note: Once fully charged, OK will be shown on the LED screen.
CHARGING THE EARBUDS
-
Please ensure that the earbuds are fully charged before using it for the first time.
-
Place the earbuds into the charging case and the earbuds will charge automatically. A white LED light inside the earbuds will turn on when charging has begun. The white LED indicator light will turn off when the earbuds are fully charged.
Note: -
Charge time is approximately one (1) hour. The earbuds cannot be used while charging.
-
The earbuds will turn off when inserted into the charging case.
SWITCHING THE EARBUDS ON AND OFF
- The earbuds switch on automatically when you remove them from the charging case.
- To switch on the earbuds manually, press and hold the Touch Control for about 3 seconds until the blue and red LED Indicator lights on the earbuds turn on and start flashing.
- To switch off the earbuds, press and hold the Touch Control Button for about 3 seconds until the LED indicator lights turn off, you will then hear a voice prompt stating that the earbuds have been powered off.
Note: If the earbuds have been disconnected for over 5 minutes, they will turn off automatically.
PAIRING WITH EACH OTHER
- Turn on both earbuds at the same time by removing them from the charging case or switching them on manually. After powering on the earbuds, wait a couple of seconds and you will hear the earbuds pair to each other
- The LED indicator on both earbuds will flash white and blue while connecting to each other
- When the earbuds are connected to each other, the LED Light on one earbud switches off and flashes on the other earbud indicating that the earbuds are in Bluetooth pairing mode.
Note: To use the earbuds individually, remove one earbud from the charging case at a time, and connect to a Bluetooth Device.
PAIRING WITH BLUETOOTH DEVICES
- The earbuds must be paired to a Bluetooth device before they can be used. It is only necessary to pair the earbuds once with each device.
- Please switch on your earbuds before attempting to pair them to a Bluetooth device.
- When switched on, the earbuds will automatically enter Bluetooth Mode.
- Open the Bluetooth Menu on the device you wish to pair (see “Locating the Bluetooth Menu” for more details). Some devices require you to select “Search for Devices” or “Add New Device” in order to create a Bluetooth pairing.
- Wait till you see “iGear-Crystal” on your device screen.
- Select “iGear- Crystal” on your device and follow any further prompts to pair. Once pairing is complete and a connection is established, the earbuds will emit a tone indicating that the earbuds are successfully connected.
| FUNCTION | OPERATION |
|---|---|
| Voice Assistant | Press and hold the left/right earbud Touch Control for 2 |
seconds.
Play or Pause Track| Tap the left/right earbud Touch Control.
Next or Previous Track| Double tap the left/ right earbud Touch Control
Volume + / Volume –| Touch the left/right earbud Touch Control 3 times.
Answer / Hang up a call| Tap the Touch Control on either earbud when a call
comes in or during a call
Reject a call| Press and hold Touch Control on either earbud for 2 seconds
when the call comes in
WARRANTY
Warranty Period: 1 Year In case of consumer complaints:
Customer Care: +91 93726 67193
Email: support@igear.asia
(Between 10am to 5pm, Mon to Fri)
For Warranty Support, Scan the QR Code
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>