eufy N930v Pet Grooming Vacuum User Manual

eufy N930v Pet Grooming Vacuum User Manual

FAQ

1. How to Assemble the Pet Grooming Vacuum N930?

nstall the dust cup Align the front groove of the dust cup with the vacuum first, then press down and buckle the back of the dust cup. You should hear a clicking sound once the dust cup is successfully installed.

Connect the hose to the vacuum cleaner
Please connect one end of the hose with the round icon to the vacuum. You should hear a clicking sound once the hose is successfully installed.

Install an attachment tool to the hose
The hose can be connected to any one of the five attachment tools included: DE shedding Tool, Cleaning Brush, Grooming Brush, Electric Clippers, and Nozzle.

Please connect one end of the hose with the rectangular icon to any one of the included attachment tools. You should hear a clicking sound once the attachment tool is successfully installed.

2. How to Achieve Different Pet Hair Lengths?

Using the Electric Clippers Please choose the appropriate length before trimming. Simply slide up to achieve shorter pet hair lengths, or slide down to achieve longer pet hair lengths. Note: Do not press the grey self-locking button when sliding up. Press and hold the grey selflocking button only when sliding down.

Using Various Clipping Combs (Optional Use)
Your pet grooming vacuum N930 comes with five sizes of clipping combs. You can achieve different pet hair lengths for your pets by choosing different sizes of clipping combs. When using the clipping combs, please align the clipping comb with the blade and press down until you hear a clicking sound.
Note: Please properly store the clipping combs when they are not being used.

3. How do I clean the filters?

Simply tap the filters to remove any dirt and dust. It is also recommended to wash the filters under cold running tap water; however, please air dry the filters completely by placing them in a well-ventilated area for at least 24 hours before reinstalling the filters.

Note: Do not use filters when they are still wet. Please note that using wet filters can lead to electric shock and may also damage the vacuum.

4. How often do I replace the filters?

It depends on the vacuum's usage frequency. Please replace the filters if the filters are worn out or the vacuum's suction power has diminished.

What should I do if the suction mode indicator light on my Pet Grooming

Vacuum N930 flashes for 10 seconds and the vacuum stops working

This issue occurs when the electric clippers may be malfunctioning. Please try the following troubleshooting steps to verify if the issue can be resolved:

• Remove the electric clippers from the hose.

• Remove the blade from the electric clippers to clean it.

• Make sure the blade is installed properly before using the electric clippers..
  

• Restart the vacuum to verify if the issue has been resolved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>