ENSTER B0BQ6SNZHG 360° Outdoor PTZ Security Camera User Guide
- June 15, 2024
- ENSTER
Table of Contents
Binocular PTZ camera
ENSTER
security camera manufacturer
15+ YEARS CCTV CAMERA FACTORY
Quick Manual for Android and iOS
Our products are covered by a one-year warranty.
For refund/return/exchange/installation/iCSee APP problem,please cantact us:
Email:support@enster.com
Whats app ID:+86-13570806800
Warm tips before you go:
Camera can only be set up with 2.4g Wi-Fi network. (It’s ok to use Cell phone 4G data to live viewing it after the camera was set up with 2.4g Wi-Fi network firstly.)
- You may possibly need a Wi-Fi extender if your Wi-Fi signal is weak around the yard where you want to install it.
- Please format the micro sd card to FAT32 format and install the card when camera powered off. (Micro sd card is not provided in the package)
- Make sure the distance between your phone, router and the camera is no more than 1.5 feet when you’re ready to pair the camera. Ensure that the Wi-fi signal strength on your phone is good.
- If you install the camera on stucco, brick or concrete surface, please mark 4 holes matching the bracket and then use a drill driver to drill into the wall and insert the expansion screws to hold the camera tightly
- For your safety, please read and understand this manual before using your product. After reading this manual, please retain for future reference regarding any questions that may arise.
Introduction:
Thanks for your purchasing. In order to better understand the product performance and normal use and maintenance of this product, please read this manual carefully before use.
Interface
Before use,blease pay attention to the terface and button of camera.
Operation
-
Download APP
Tipsone: Scan QR code.
http://d.xmeye.net/CSee
Tips two: Search “iCSee” in the App store and download. -
Power on
Use the power adapter to connect the camera power interface and the power socket, As shown in the figure below.
Note:
If you need local storage, please install the SD card firstly, then power on the device (the memory card does not support hot swapping, please plug and unplug the memory card when the device is powered off). -
Camera configuration
1.Wireless network configuration:
01.User login
• Connect your phone to WiFi.
• Open the iCSee app, register an account and login(Figure 1).
02.Quick configuration
• After successful login, Click the button (Figure 2).
• Click the “”WiFi Camera” ( Figure 3 ).
• Set network configuration according to the camera’s voice prompts and the APP interface step-by-step guide. When the camera emits a “Connect router successfully” prompt, it means that the camera has successfully configured the network.
Note:
If the camera does not have a prompt sound for a long time, you can press and hold the camera Reset button until you hear the prompt” Restore factory settings, please do not power off “and release it to restore the camera to factory settings and then configure the network.
• After the network configuration is
successful, follow the instructions on the APP interface to set the camera
password and name.
• After the configuration is completed, the device is displayed in the device
list interface. Click to open the real-time preview screen, and carry out
relevant operations and settings(Figure 5).
2.Wired
network configuration:
Note: If you choose to use network cable to connect the camera, please
configure it as follows.
• After successful login, Click the button (Figure 2).
• Click the “Other distribution networks and adding methods”, Click the
“Nearby Cameras” ( Figure 6,7 )
• Enter the device search interface and click the searched camera to add a
device (Figure 8).
• After the configuration is completed, the device is displayed in the device
list interface. Click to open the real-time preview screen, and carry out
relevant operations and settings(Figure 5).
-
Instructions
01 .Zoom description
• Click the zoom button on the real-time preview screen to zoom the screen in real time(Figure 9, 10).
*02. Dual Lens &180° Panorama
*• Click the binocular icon in the lower right corner of the live view, you will get two camera views(Figure 11).One view is the close-range view and the other is the distant view with 180°panorama (Fiture 12). Our dual lens camara can stitch two views into one with no gap amd leave no blind spot.
-
Cloud storage
• Steps to open cloud storage: click the “cloud storage” or “cloud” icon in the device list interface (Figure 13), and follow the guidance of the app interface to understand and open the cloud storage package, with a variety of packages available.
-
Function Setting
Application main page function introduction
-
More advanced settings
01 .Basic Settings
Change some general camera settings.
02 .Password
Change the password previously set for the camera. (If you forget the old password, then you need to reset the camera, and then you can set the password after you relink the camera)
03 .Local Storage
After inserting a SD card, you can set up storage management.
(Support up to 128G SD card, you need to buy it yourself: )
04 .Record Settings
Set the camera recording duration and recording quality.
05 .Smart Alarm
Please adjust the alarm method according to your needs.
06 .Network Settings
You can change your WiFi password or replace it with a new one here.
07. About Device
View basic information about the camera.
https://technimobili.com/pages/order-parts
FAQ
How do cameras store video?
1. Local TF card storage, maximum support up to 128G TF card after full automatically delete earlier video, overwrite video. 2. Cloud storage(Paid access required).
What should I do if forget the device password?
Re-connect and set a new password after the device is restored to factory settings. Note: please remember your new password for further usage.
How to do if the camera is not connected or offline?
Is 5G router supported?
If you use 5G router, 5G and 2.4G use the same connection hotspot (that is, SSID is the same), you can connect directly. If 5G and 2.4G are not the same connection hotspot (that is, SSID is different, generally SSID of 2.4G is xxxxx-2.4G, SSID of 5G is xxxxx-5G), please connect WiFi of mobile phone to hotspot of xxxxx-2.4G of router before configuring camera.
Why the camera does not detect anything but frequently alarms?
1. Check if the camera power or network of router normally . 2. You can adjust the most suitable sensitivity 3. Turn on smart humanoid recognition and frame human form to reduce false alarms caused by other objects.
Help
The product enjoys a free one-year warranty from the date of purchase, and
you can get in touch with us by remarking the order number in the following
ways. We will provide you with a satisfactory solution.
- If you need a power extension cord, you can contact us by email, note your order number and contact us.
- If you have any questions, we will provide you with a satisfactory solution, please feel free to contact us.
- In order to thank you for your trust in our products, we sincerely invite you to participate in the free testing activities of our new products to give us valuable opinions on the development of new products. For details, please consult us for more information.
Thank you for your trust in us and hope you all go well.
Waiting for your letter.
Whatsapp ID: +86-13570806800
Email: support@enster.com
Notice
- Please change the user password while using this product to avoid being misappropriated by criminals.
- Do not install the device in a place that is damp, dusty, or accessible to children.
- Please use and store within the allowable temperature and humidity range, and do not disassemble the equipment at will.
Directions
- Please refer to the actual product, the manual is for reference only.
- The APP and product firmware will be updated from time to time. You can upgrade to the latest firmware online by yourself without notice. The manual is for reference only.
- The manual may contain technically inaccurate parts or parts that are inconsistent with product functions or printed errors. Please refer to our company’s final interpretation.
- We use software encryption to protect the security of private data, please feel free to use.
ENSTER
security camera manufacturer
Email: support@enster.com