HAUSHOF HH22064A Spot Carpet Cleaner Machine Instruction Manual
- June 15, 2024
- HAUSHOF
Table of Contents
HH22064A
CARPET SPOT CLEANER
ORIGINAL OPERATION MANUAL
MODEL#: YLW6336
Thank you for buying a HAUSHOF CARPET SPOT CLEANER. It has been engineered and
manufactured to HAUSHOF’s high standard for dependability, ease of operation,
and operator safety.
When properly cared for, it will give you years of rugged, trouble-free
performance.
WARNING: To reduce the risk of injury, the user must read and understand
the operator’s manual before using this products.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Attentions
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
READ ALL SAFETY WARNINGS AND INSTRUCTIONS BEFORE USING THIS PRODUCT.
WARNING: When using an electrical product, basic precautions should
always be followed to avoid electric shock, fire, and/or serious injury,
including the following:
– This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabiliies or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
– Children shall not play with the appliance.
– Cleaning and user maintenance shall not be made by children without
supervision.
- This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non-domestic use or in a commercial environment.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowl- edge if they have been given supervision or instruction concern- ing use of the appliance in a safe way and understand the hazards involved.
- The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
- Regarding the detailed instructions for the method and frequency of cleaning and the precautions during user maintenance, refer to the section
“CLEANING AND MAINTENANCE”.
-
Following objects are strictly banned, otherwise the vacuum cleaner will be damaged or fire calamity will be caused, which bring such accidents as human body injuries:
Don’t pick up large or sharp broken objects such as glasses. -
Don’t pick up harming or erodent liquids (solvent, corrosive, detergent…).
-
Don’t pick up inflammable or explosive substance such as gasoline or alcohol. ¢ Don’t pick up/ vacuum burning or glowing objects (cigarettes, matches, hot ashes).
-
The liquid or steam must not be directed towards equipment containing electrical components, such as the interior of ovens.
-
The filling aperture must not be opened during use. ¢ The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
-
The appliance shall not be left unattended while it is connected to the supply mains.
-
The appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
-
Keep the appliance out of reach of children when it is energized or cooling down.
-
Do not leave the appliance unattended when it is switched on.
-
Do not use the appliance for any purpose other than those described in this instruction manual.
-
Always disconnect the appliance from the power supply if it is left unattended and before assembling, disassembling or cleaning.
-
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
-
Use only original accessories recommended by the
-
Do not use outdoors.
-
Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
-
Do not use the appliance to pick up the following items :
— Dry dust
— Lots of rubbish
— Big plastic bags
— Large quantities of powder
— Metal such as
— Large quantities of needles, pins, etc. sands and pebbles
Parts Name
- Body****
- Accessories
TECHNICAL DATA
Rated Voltage: | 220-240V~ |
---|---|
Frequency. | 50-60Hz |
Rated Power: | 400W |
Suction Power: | 9Kpa |
Clean Water Tank Capacity: | 1L |
Dirty Water Tank Capacity: | 0.5L |
Preparation
Insert the hose hook into the machine.| Remove the clean water bucket from the
body.| Turning the tank upside down, after fill with clean water then tight
the screw cap. The maximum water capacity is about 1L. (The screw cap is not
pre-installation on the product, find it in box when first use.)
Install the clean water bucket into the body.| Insert the handle into the
water sucker.| Fix the hose and power cord before handiing.
Instructions
Plug it in, turn on the power (start).| Press the watering button to spray
clean water. Spray the stain with clean water to let it surface. Do not spray
continuously at the same spot. After spraying, absorb the water, so as not o
cause mildew and odor.| Absorb water, spray clean water while absorbing
sewage. Press the water suction inlet on the stain, bring the water and dirt
to the front and suck them.
Stop spraying, and absorb the sewage. After using the cloth on which water is
easlly retained, please blow dry or air dry.| Turn off the power (stop),
unplug it Pour away clean water and sewage,
and clean the sewage bucket
For stubborn dirt
Apply the cleaning solvent to the carpet and rub
the dirt with a brush to lif it up. For the amount
and usage of the cleaning solvent, please read the manual carefully and use it
correctly.| Absorb the dirt and do not leave any solvent.
3
| √ Recommended
Detergent
• Strong alkaline ionized water
• Baking soda
• Citric acid
• Hypochlorous acid
• Weak acid electrolytic water Such as detergent producing less foam| X
Not appropriate
• Neutral detergent for kitchen use
• Strongly alkaline detergent
• Strongly acidic detergent
When using a detergent with a lot of foam, the foam might get inside the
cleaner.
---|---|---
Detergent
Remark
Do confirm that wash solvent does not cause damage to carpet before use.
When using detergent, first test it on the edge of the fabric being cleaned to
make sure that there is no discoloration.
Do not use diluent, aniline, chloroform, and flammable solvents.
Do not spray any liquids such as insecticides, hair care products, o
lubricating oil
Do not use the product to vacuum flammable or combustible substances.
(such as kerosene, gasoline, thinner, copy product toner, etc. )
Do not use the product to vacuum oil, smoke or steam
Do not use the product to vacuum dry dust.
Do not operate this unit near combustible substances such as lit cigarettes or
incense sticks, doing so may increase the risk of fire.
Only water (clean tap or recommended Detergent) that is 40°C or cooler should
be put into the clean water tank.
Attention
- Do not put the cleaning solvent in the clean water bucket, make sure the solvent is not harmful to the carpet before use.
- Do not use diluents, aniline, chloroform and flammable solvents.
- For the amount and usage of the cleaning solvent, please read the manual carefully and use it correctly.
Cleaning and Maintenance
Cleaning of bucket
Take out the clean water bucket in the direction of arrow, unscrew the screw
cap and pour away the remaining water.| Install the empty bucket and then turn
on the power again, press the watering bution to remove the remaining water
from the machine.| Tilt the machine and pour away
the remaining water at the botiom.
Cleaning of sewage
When the sewage reaches the maximum water level, stop working and turn off the
power. Remove the sewage bucket in the direction of arrow.| Open the upper
cover of the sewage bucket and pour away the sewage. Do ot tilt or shake the
sewage bucket when carrying it otherwise, the sewage will outflow easily.|
Clean the bucket, upper cover and sealing strip. Clean the sewage bucket in
time after use, so as not to cause bacteria and smell,
Install the sealing ring, cover and fasten the sewage bucket.| Buckle the
sewage bucket into the body. Lock the sewage bucket, do not shake; otherwise,
it is easy to leak and affect the cleaning| Stop using when the water in the
sewage bucket exceeds the maximum water level, clean the sewage bucket;
otherwise, the water will flow into the machine.
After use every time, remove them from the body, rinse thoroughly with water
and air dry.| Disassembly of water sucker.| Disassembly of water sucker cover.
Installation of water sucker cover:
1. the pin and hole fit well
2. Press in until clicking sound to make sure the installation is in place|
When cleaning the water sucker, emply the nozzle if it blocked.| Check the
hose for breakage and leakage.
Rinse the inlet air sponge and filtering sponge after use, and replace them if they are damaged.
Pour away the sewage before it exceeds the maximum water level.
If the machine continues to be used after the sewage exceeds the maximum water
level, the floating ball will work and the suction will stop. When the water
flows into the machine, turn off the machine and clear away the water inside
the machine, pipe and bucket.
Attention
- Stop running and unplug it before maintenance.
- Do not water the machine to avoid electric shock.
- Do not use the detergent, diluent, benzene and other chemical agents to clean the machine.
Consumables, Fault a Handling
The consumables can be removed and replaced when damaged or lost. Be sure to
install and use
In the event of
exceptions in use, read this manual carefully and confirm the following points
before repair.
Status | Fault cause analysis | Handling |
---|---|---|
The machine does not work after the switch is turned on | • The plug is not |
properly connected and loose, resulting in poor contact.
• The internal line or power cord is broken.
• The machine set overheats and the.
protective device operates| Turn off the power and plug it again.
Cal the repair telephone.
Refer to the instructions for protective device
When the watering button is pressed, there is no water
or little water| • The nozzle is blocked.
• The handle or pump is damaged| Remove the water sucker and rinse the nozzle
with clean water.
Call the repair telephone.
There is no dust collection or the suction is very weak| • The power switch is
not turned on.
• The sewage bucket is ful, causing the floating ball to work.
• The hose is abnormal.
• The sewage bucket s not installed in place.
• The inlet air sponge is blocked| Turn on the power switch.
Clean up the sewage and use it again.
Check the hose for cracks, breaks and clogs.
Install the sewage bucket properly.
Clean or replace the sponge.
Environment Friendly Disposal
Disposal of the Appliance
This product has been marked with a symbol relating to removing electric and
electronic waste.
This means that this product shall not be discarded with household waste but
that it shall be returned to a collection system.
It will then be recycled or dismantled in order to reduce the impact on the
environment. Electric and electronic equipment can be hazardous for the
environment and for human health since they contain hazardous substances.
Disposal of the Packaging
**** The packaging consists of cardboard and correspondingly marked plastics
that can be recycled.
Make these materials available for recycling
Distributed by :
Hangzhou GreatStar Industrial Co., Ltd.
No.35 Jiuhuan Road, Jiubao Town,
Hangzhou 310019, China
www.greatstartools.com
MADE IN CHINA
Zhejiang Yili Machinery And Electric Co., Ltd.
No.111, Lingxiu Road, Luoxing Street,
Jiashan County, JIAXING CITY,
Zhejiang Province 314100
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>