KEYNOUO VN66 Keyboard User Manual
- June 15, 2024
- KEYNOUO
Table of Contents
KEYNOUO VN66 Keyboard
KEYBOARD MANUAL
For any support: support@yunzii.com
Website: www.yunzii.com
- Number of Keys: 66 keys
- Cable Length: 1.5m
- Port of Connection: Type-C
- Battery: 2200mAh
- Product Size: 32811538 mm
- Product Weight: 8209±109
- Connection Method: Wired, 2.4G Wireless, BT5.0 Tri-mode Connections
- System Support: Windows, Mac, Linux, iOS, Android
Functions of Key Combination
Connection Instructions
Long Press
FN+R: 2.4G Wireless Mode
FN+Q/W/E: Bluetooth Mode
FN+ T: Wired Mode
Display Name
wired connection: Gaming Keyboard
2.4G connection: 2.4G Wireless Device
BT3.0 connection: BT3.0(Compatible with Win? system)
BT5.0 connection: BT5.0KB( Support Win8 and above system)
2.4G Wireless Pairing
- Turn on the keyboard by pressing the button on the back.
- Press FN+R to 2.4G wireless mode.
- Long press 3 seconds FN+R to enter the pairing mode, the indicator light will fast flash and start sear evice.
- Plug in the 2.4G wireless receiver to you device, wait for the keyboard to connect to the device automatically.
- The indicator light stays on for 2 seconds and then pairing is successful.
2.4G connection name is 2.4G Wireless Device.
If no paired device is found, 30 seconds later the code pairing indicator light is off,
the keyboard will enter the sleep mode.
Bluetooth Wireless Pairing
- Turn on the keyboard by pressing the button on the back.
- Press FN+Q/W/E to Bluetooth mode.
- Long press 3 seconds FN+Q/W/E to enter the pairing mode, the indicator light will fast flash and start searching for device.
- Turn on the device Bluetooth, the indicator light stays on for 2 seconds, then the pairing is successful.
- If no paired device is found, 30 seconds later the code pairing indicator light is off, the keyboard will enter the sleep mode.
Bluetooth Compatibility
Compatible with all Bluetooth Dongles, laptop built-in Bluetooth module,
Bluetooth 5.0 supports Windows 8 and above systems, pad and mobile phones,
etc.
Backlight Effect Settings
Press FN+\ =Change Light Mode
The RGB modes have these effects: Always bright, Breathe, Neon, Lightwave,
Ripples, Laser, Raindrop, Zigzag, Single light aggregation, Sine wave,
Blooming flowers, Colorful spring water surge, Turnaround, Colorful vertical
and horizontal.
Press FN+ Backspace =Turn off Keyboard Backlight Effect
Press FN+P Key=Change Light Color
All the backlight modes can adjust speed, brightness, color, direction. There
are 5 stages of brightness, default maximum brightness. There are 5 stages of
speed, default the level order speed.
Wireless Back-Connection Indication
After the keyboard is powered on or wakes up by pressing any keys, the
keyboard will connect back to the current device. If the connection is
unsuccessful, it will enter the sleep mode.
In the process of 2.4G back-connection or the Bluetooth back-connection, the
indicator light flashes slowly. When the indicator light stays on for 2
seconds, it means re-connection is worked.
Description of Battery Indicator
The Left CTRL key flashes red=Low Battery, Please use the cable to charge in
time.
In Wired Mode, Long press FN+Y=Check the battery power (The number keys 1-0
light up in sequence to indicate that the remaining power is from low to full
power.)
Custom Software Download
You can contact us through official website, email and our social media.
In Wireless or Wired connection, you can make the software programing, custom
lighting effects and so on.
Note : Wired connection is required to upgrade keyboard firmware.
CONNECT WITH US
Scan the QR code to the official website for download the software.
For any support: support@yunzii.com Website:
www.yunzii.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>