Chweres FI2019LB-B Smart Body Fat Scale User Manual

Chweres FI2019LB-B Smart Body Fat Scale

Package Contents

• 1 x Smart Body Fat Scale
• 1 x USB Type-C Charging Cable
• 1 x User Manual

Specifications

• Weight Capacity                 400 lb/180 kg/28 st
• Increments                        0.1 lb / 0.05 kg
• Weight Units                      lb / kg / st
• Platform                            Tempered Glass
• Battery                              300mAh Li-ion Battery
• Input                                 5.0V=1A (USB Type-C Charging)
• Auto-Off                            15 seconds (after displaying body indexes)
• Dimensions                       10.94×10.94×1.06 in/27.8×27.8×2.7 cm
• Operating System              iOS 8.0+ or Android 6.0+

Safety information

When using the digital scale, please follow the basic rules:

1. The smart scale should not be used to diagnose or treat any medical condition. Scale data should not be used as a substitute for medical advice from a healthcare professional.
2. If you are pregnant or have a pacemaker or other internal devices, you should not over-rely on the data provided by the scale. All data is for reference and is not a substitute for advice from a licensed doctor.
3. Do Not use the scale if there is a crack or any other damage. Check the scale before each use. The continuous use of a damaged unit may cause injury or improper results.

Note:

1. Do Not jump or stamp on the scale or disassemble. Please handle the scale carefully to avoid breakage.
2. the scale on a soft surface like carpet or linoleum may affect the accuracy of the scale readings.
3. To ensure weighing accuracy, please gently step on the scale to wake it up and wait at least 10 seconds. You must also wake up the scale if it has been moved. Take your measurements at the same time each day to ensure the most accurate results.
4. Before using the scale, make sure you have entered all your personal data through the Fitdays app.
5. Use the scale while barefoot. The scale cannot measure body fat percentage if you’re wearing shoes or socks.
6. Make sure your feet are dry before weighing yourself.
7. This scale is not to be used for persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

Display Diagram

1. Battery volume
2. Connected
3. Weight units
4. Body fat rate
5. Body water rate
6. Body Heart rate
7. Body type assessment
8. Body weight
9. BMI
10. Muscle rate
11. Bone mass

APP Setup

1. To download the “Fitdays” app, scan the QR code or search “Fitdays” in the Apple App Store or Google Play Store.

2. Open the Fitdays app. If you already have an account, tap Log In.
   To create a new account, tap Sign Up.
   Note : If you are a new user, you will need to enter physical information before weighing yourself for the first time so the scale can calculate your body metrics. Follow the in-app instructions to create a user profile.

3. Make sure the Bluetooth function of your phone is activated.

4. Tap “+” in the Fitdays app and select your smart digital scale.

5. Follow the in-a pp instructions to connect to your smart scale.

Sync to Fitness App

Apple Health:
a. Open the “Health” app and click on the avatar in the upper right corner.
b. Please click “Apps” and choose “Fitdays’:
c. Turn on all categories to allow the Fitdays app to work.

Google Fit

a. Enter Setting “@ ” page, select “Google Fit’:
b. Turn on the “Google Fit” button, login to your Google account.
c. It will automatically redirect you to the “Google Fit” page.
d. After connection, the data “Weight” will sync to Google Fit.

Fitbit App

a. Enter Setting “@” page, select Fitbit.
b. Turn on Fitbit button, login to your Fitbit account.
c. Select “Allow” to access Fitbit app.
d. After connection, the data (Weight, Body Fat%, BMI) will sync to Fitbit app. You can view both on the app and web.

Using the Body Fat Scale

1. Normal Body Weighing(Without Body Composition)
   a. For the best results, place the scale on a hard, flat surface.
   b. Step on the scale, wait for the screen to display weight value.

2. Body Composition Analyzer(with App)
   a. For the best results, place the scale on a hard, flat surface.
   b. Place dry, bare feet on the scale’s conductive areas.
   c. Keep standing on the scale until the digits on the display flash several times, showing your final measurement. If your smart scale is connected to the Fitdays app, additional data (such as body fat, heart rate, etc.) will show in the app and on the display.
   Note : To switch between pounds (lb), stone (st), and kilograms (kg), open the Fitdays App and select the weight unit in the Device Settings menu.

Maintenance

1. Calibrate the scale
   a. If the scale has been moved or flipped upside down, it must be cleared to ensure accurate results.
   b. Place the scale on a hard, flat surface.
   c. Step on the scale with one foot until the digits appear on the display, then step off.
   d. The scale will show “o.oo•; indicating that the calibration process is complete.

2. Cleaning the Smart Scale
   a. Use a slightly damp cloth to clean the surface of the scale, followed by a soft, dry cloth to wipe away any remaining moisture.
   b. Do Not use chemical or abrasive cleaning agents to clean the scale. This scale is not waterproof, please Do Not immerse it in the water.

3. Charging the Batteries
   When the display shows “•” (low Battery), that means you need to charge the scale.
   a. Put the charging cable into the socket of the scale and plug the USB charging cable into a DC 5V adapter and plug it into an outlet. You can also plug the cable into a powered USB outlet.
   b. The bars of the “1:2:1>” will continuously fill as the scale charges. When completely charged, the ” □,” will be filled.

Troubleshooting

1. Why doesn’t the scale work? Why screen disappear in a flash?
   a. The scale may be in the low battery mode. Please charge the scale to get the better experience. Charging the scale may take up to 2 hours.

2. The scale cannot connect with App?
   a. Check that the phone’s software is iOS 8.0 or higher or Android 6.0 or higher.
   b. Download and open the newest version of the Fitdays App.
   c. Enable Bluetooth on your phone. Make sure the app has permissions for location, etc.
   d. Make sure the scale is not currently connected to any other phones or Apps.

3. No body fat data when weighing?
   a. Step on the scale with dry and bare feet.
   b. Ensure Bluetooth is enabled and working.
   c. Ensure personal data is entered when you log in to the App.

4. What does the message mean?**
   Message| Reason| Solution
   ---|---|---
   LO| Low Battery| Please charge the scale
   Err| Overload(Maximum weight capacity: 400 lb /180 kg| Step off the scale to avoid damage
   C**| An error has occurred during the using time| Please place the scale on a hard, flat surface and wait for it to be cleared before use

5. The scale readings seem unstable or inaccurate.
   a. Make sure the scale is on a hard, flat surface.
   b. Try to calibrate the scale. Please check page 7 .

Customer Support

If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Every CHWARES product comes with a 12 month warranty, please don’t hesitate to contact us if you need help. And please don’t forget to share your user experience if you are satisfied with our product. Thank you.

Email : chwares.service@yahoo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>