FODEXAZY ZQ02097US 180W Moving Head Light User Manual

FODEXAZY ZQ02097US 180W Moving Head Light

Please read the instructions carefully before use

• Thank you for using our moving headlight,
• Note: the important information contained in this manual shall be installed and operated according to the requirements of the manual,
• At the same time, please keep this manual properly for future use.

1. menu
2. up
3. Down
4. Enter
5. display Screen
6. DMXIN
7. DMX OUT
8. Power Supply
9. Fuse
10. Cooling hole

Unpacking instructions

When you receive the equipment, open the package and check whether the contents are complete and intact. If not, please inform the carrier immediately and keep the package if shown damaged. Keep the packaging and all packaging materials for safe transportation of the equipment.

• 1 lamp
• 1 instruction manual
• 2 bow supports
• 1 power cord
• 2 screws (installed on the machine)

Safety instructions and operating instructions

When the power is plugged in and the switch is turned on, “RST” is displayed. Moving headlights are resetting it. Please do not operate. When the power is plugged in and the switch is turned on, “RST” is displayed. shiftThe moving headlamp is resetting. Please do not operate.

1. It must be inserted into the grounding power socket, which is only for indoor use;
2. To avoid fire or electric shock hazards, do not expose this equipment to rain or moisture. During operation, ensure that there are no flammable objects near the equipment.
3. Install the equipment in a well-ventilated place at least 50 away from any surface Cm, and make sure that the ventilation slot is not blocked.
4. Please disconnect the equipment from the power supply before any operation or maintenance.
5. The ambient temperature should not exceed 40 °C, and the maximum ambient temperature should be 45 °C. Do not. Operate the equipment at higher temperatures.
6. In case of failure, stop the equipment immediately and do not repair the equipment by yourself. Improper maintenance may cause damage and failure. Contact technical support to agree. Only use the same spare parts as the original parts to ensure that the power cord is not blocked or Damage;
7. Don’t expose your eyes to light. For sensitive people, strong light can be a sign of seizures;
8. Lamps and lanterns are only used for decoration, and are not suitable for ordinary household lighting;
9. Replace the fuse: Unplug the device from the power supply. Secure the fuse with a screwdriver Remove the silk seat from its original position. Take out the burnt fuse and replace it with Fuses with the same characteristics. Rotate the screws again and connect the device to On the power supply.
10. Warning: if the fuse is still burning after replacement, please stop Use; Please contact customer support for further instructions. Continue to use can cause serious damage;
11.  Fix the device with the screw holes on the bracket. Ensure that the equipment is firmly fixed to prevent Stop vibration and movement during operation, and always check the support equipment Whether the structure is firm enough to bear at least 10 times the weight of the equipment Equipment;
12.  The equipment must be fixed by professionals in places beyond people’s reach, and No one can pass under or above the crosswalk;
13. A scrap of products: this sign indicates that this product should not be thrown into the European common market In the household garbage of the country. In order to protect the environment and / or human health, Waste should be recycled in a responsible manner to support the sustainable recycling of resources Utilization. If you need to recycle second-hand electrical appliances, please go to the electrical appliances collection center or contact you Contact the dealer who purchased the product. They will ensure the ecological recycling of products;

Please read this manual carefully before operating this product.

Installation instructions

1. Instruct to install the bow bracket, Fix with screws after installation.
2. Indicates that the hook bracket is connected with the bowType support installation.
3. Indicate to confirm your bracket position and Whether it is installed correctly.
4. Indicate that your bracket is No, the installation was successful.

Hinweis: Hook Type Unterstützung ist nicht im Paket enthalten

Startup steps of various modes

1. Automatic mode:
   Press “menu” to find “send”, press “enter”, press “up” or “down” to select “ATO”, and press “enter” to start.

2. Sound mode:
   Press “menu” to find “send”, press “enter” to confirm, press “up” or “down” to select “sound”, and press “enter” to start. Adjust the sound sensitivity, press “menu” to find “sens” and press the “up” or “down” key to start the speed of sound sensitivity (the higher the value, the faster, the lower the speed)

3. Console mode and master-slave mode:
   DMX out to 1 lamp dmxin; No.1 lamp DMX out is connected to No.2 lamp dmxin;Press “menu” to find “add”, press “enter”, display “A001”, press “up” or “down” to select the value of the console; Setting of master-slave machine: No. 1 lamp is set as self-propelled or voice control function according to the starting mode; 2, 3, 4 **** set to DMX512 mode: DMX address code is 001

Menu functions

DMX channel functions
13CH

2

| ****

Vert ical motor

| 0—127 0—360degreetravel posit ion i ng
128—191counter clockwise from fast to slow infinite rotation
192 —255 clock noise from slow to fast infinite rotation
3| Horizontal l / vertical motor speed| 0—255 from fast to slow
4| Total dimming| 0– -255 0—100% linear dimming
5| Stro bos co pic| 0– – 2 55 from slow to fast strobe (0-20hz)
6| Red dimming| 0- –255 0—100% linear dimming
7| Green dimming| 0—255 0—100% linear dimming
8| Blue dimm ing| 0—255 0—100% linear dimming
9| White dimming| 0—255 0- – -100% linea dimming
10| Lamp bead macro function on| 0—5 no function on,6—255 macro function
11| Motor macro function| 0—15 no function, 16—127 self-propelled, 128—255 voice control
12| Macro function speed/control sensitivity| Speed from fast to slow (sensitivity from slow to fast)
13| reset| 0-249nofunction, 250-255whole machine reset(effective after 5seconds)

15CH

3

| ****

Vertica I motor

| 0—127 0—360 degree travel positioning
128—191counter clockwise from fast to slow infinite rotation
192—255 clockwise from slow to fast infinite rotation
4| Tilt Fine| 0—255
5| Horizontal/vertical motor speed| 0—255 from fast to slow
6| Total dimming| 0—255 0– -100%linear dimming
7| Stroboscopic| 0– -255 from slow to fast strobe (0- 20hz)
8| Red dimming| 0—255 0—100% linear dimming
9| Green diming| 0- –2 55 0—100% linear dimming
10| Blue dimming| 0—255 0—100% linear dimming
11| White dimming| 0—255 0—100% linear dimming
12| Lamp bead macro function| 0—5 no function, 6—255 macro function
13| Motor macro function| 0—15 no function, 16—127 self-propelled, 128—255 voice control
14| Maao function speed/ voice control sensnivny| Speed from fast to slow (sensitive it y from slow to fast)
15| reset| 0–249no function, 250–255whole machine reset (effective after 5 seconds)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>