MAMA S CHOICE MMC2001 Multifunctional Fruit and Vegetable Juicer User Manual

: June 15, 2024
: MAMA S CHOICE

Table of Contents

MMC2001 Multifunctional Fruit and Vegetable Juicer
Precautions for safe use
Parts and Functions
Method of Application
Maintenance and Preservation
Product Safety Indexes
Applicable Standards
Fault Analysis and Troubleshooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Masticating Juicer
User Manual
MMC2001

MAMA S CHOICE MMC2001 Multifunctional Fruit and Vegetable Juicer -
Cover Facebook: #Mama’s Choice US
Message: #Mama’s Choice US
Email: [email protected]

MMC2001 Multifunctional Fruit and Vegetable Juicer

Distinguished users, thank you for using MMC2001 Multifunctional Fruit and Vegetable Juicer from MAMA’S CHOICE. In order to better acquaint you with the correct operations of this product, please read these instructions carefully before use. Be sure to carefully read Chapter II “Safe Use Instructions and Precautions and pay special attention to the boldface part in the manual. (No further notice is made if technical specifications are altered in these instructions.)

Foreword
Thank you for using our Multifunctional Fruit and Vegetable Juicer. To correctly use and maintain this product, we have specially prepared these instructions. Please carefully read these instructions before using the product and keep it for further consulting. This manual is only applicable to the MMC2001 Multifunctional Fruit and Vegetable Juicer from MAMA’S CHOICE who reserves the right of final interpretation. All contents in these instructions are used only as references for users when using and maintaining this product. All users are welcome to consult the Customer Service Department regarding any outstanding issues. If there are deficiencies in these instructions, all users are welcome to share their opinions with us. We hope that our products make your life warm, sweet, convenient, and healthy.

Precautions for safe use

Input voltage of this product is AC120V60Hz, please confirm before use.
Disconnect the power supply before dismantling, assembling, or adjusting any part.
The product has Y type connection. If the power cable is damaged, contact our customer service department or have it replaced by a designated service center directly.
Before use, please check if the power cord, plug, fine strainer, auger, noodle extruding body, and other parts are damaged. Please stop using the product if any damage is found and contact our customer service department, or go to MAMA’S CHOICE designated maintenance shop to repair. Do not disassemble and repair yourself.
If product maintenance is necessary after use, contact our customer service department, or have the maintenance done by a designated service center directly. It is dangerous to dismantle the product by yourself.
Before switching on the power, please make sure that the removable parts are fully installed, such as the juicing body, auger, fine strainer, juicing body cover, etc.
During operation, to avoid any damage to the operator or the product, it is strictly forbidden to put fingers or sharp objects into the material inlet and directly contact the rotating parts such as the auger, etc.; it is strictly forbidden to use any object to replace the pusher rods. It is strictly forbidden to keep eyes close to the material inlet to avoid injury.
The ingredients should be cut into small pieces so that they can be put into the inlet of the juicing body. If there are fruits and vegetables with kernels, hard seeds, thick skins, or hard shells, remove them before processing.
When ingredients are put in, the force to push the ingredients should not be too great.
It is normal for the fine strainer, juicing body cover, auger, and other parts to be stained after juicing certain fruits and vegetables. It does not affect the quality of the food and will not be harmful to eaters’ health.
The product is equipped with an intelligent protection chip, making it automatically stop after 20 minutes of continuous work. At this time, please stop the operation for 20-30 minutes, and then continue to use the motor after cooling. This method is conducive to extending the service life of the product.
The product has a current limiting design. When processing harder ingredients, the motor will be locked-rotor and the current will increase. When the current exceeds 2A, the machine will make a “click” sound and the motor will stop working. This method can effectively protect the motor from over-current and extend the service life of the motor.
If the motor stops automatically due to current limiting protection or locked-rotor during operation, the power switch should be transferred to “REV” state, and the ingredients should be withdrawn. And then the power switch should be transferred to “Hard” or “Soft” state to ensure the normal use of the machine. If it is still locked-rotor, it is recommended to clean up the ingredients in the auger before continuing to use it. This method is to protect the motor.
After use, please wait until the motor and auger stop rotating and make sure that the power is disconnected before removing the detachable parts of the machine.
All parts of this product are not allowed to be disinfected with hot water over 80°C and microwave ovens to avoid thermal deformation damage. Parts and materials in contact with food ingredients are, clean, hygienic, reliable, and in line with food hygiene certifications.
Do not put the juicer body into water or other liquids, nor flush it with water or other liquids to avoid any damage to the machine body.
Do not clean the product with steel wool, abrasive cleansers, or corrosive liquids (such as gasoline or acetone).
Store the product in a place out of the reach of children. Use or play of the product by persons with disabled limbs, sensory or mental disorders, or by persons without relevant experience or knowledge (including children) is forbidden.
This product is only applicable to individual or home applications.
This product is a Class I appliance. The grounding wire of the socket must be well-grounded.

Parts and Functions

MAMA S CHOICE MMC2001 Multifunctional Fruit and Vegetable Juicer - Parts and
Functions 1

Serial number	Name of parts	Function introduction
I	Power Line	Used to power on and provide power.
2	Juicer Bad y	The main parts of the machine, including the motor and other

parts. It is the source of this machine and provides power.
3| Power Switch| Control the working status of the product, including forward rotation, forward rotation, closing, and reverse rotation.
4| Button| It is used to lock the juicing body and prevent the body from loosening from the machine body during operation. When you need to remove the juicing body from the machine body, you must press and hold the button.
5| Juice Cup| Catch and collect fruit juice separated from the juicing body.
6| Pomace Cup| Catch and collect pomace separated from the juice.
7| Pusher| When ingredients are placed, gently push the ingredients so that the ingredients are in full contact with the auger to increase the juicing efficiency.
8| Hopper| It is mainly used to store juiced ingredients.
9| Juicing body| It is the main part of juicing. The ingredients are put in from the inlet on top of the juicing body and discharge the juice and pomace through the juice outlet and pomace outlet.
10| Auger| It is the main part of the juicer, which is used to convey the ingredients and grind the ingredients together with a juice strainer or squeezer.
I I| Fine strainer (with screen inside) juice.| Run in with the auger to grind the juiced ingredients and filter out the
12| Juicing body cover silicone loop| It is placed at the joint between the juicing body and the juicing body cover (to prevent the juice from flowing out from the joint) and also to adjust the tightness of the juicing body and the juicing body cover.
13| Juicing body cover| The main components of juicing connects the juicing body to play a role in security protection.

Method of Application

Before using this product for the first time, please thoroughly wash parts that touch with foods (see “Chapter V Maintenance and Preservation”)
| Operation instructions of the power switch (gear):
“0ff” state: close, stop gear
“Hard” “Soft” state: use gear for normal operation
“REV” state: when stag discharge is not smooth or locked-rotor, this gear shall be used. (Hint: when slag discharge is not smooth or locked-rotor, turn the power switch to the “REV” position for about 3 seconds, and the propeller starts to reverse. Release the power switch and stop the reverse rotation; At this time, turn the switch to the “Hard” or “Soft” position, and then resume the forward rotation to continue working.
---|---

I. Product Usage
Follow these steps to install and use the product:

| 1| Connect the juicing body to the machine body:
1. Put the central position of the inlet of the juicing body to align the position of the “unlocking sign” on the machine body (the three fasteners of the juicing body will be aligned).
2. Then rotate counterclockwise, and when you hear a “tick” sound, it shows that the juicing body is fully connected.
---|---|---
| 2| Put the larger end of the fine strainer in from the end of the auger, and align the three fasteners of the fine strainer to the three fastening slots in the juicing body. (The fine strainer is only used in conjunction with the juicing button on the back, and this function is used for juicing)
| 3| Put the larger end of the fine strainer in from the end of the auger, and align the three fasteners of the fine strainer to the three fastening slots in the juicing body.
| 4| Displace the three fastening slots on the juicing body cover from the three fastening slots on the juicing body, push into horizontally, and then rotated counterclockwise to screw tightly the juicing body cover and the juicing body.
| 5| Place the juice cup next to the machine body and its open aligns the juice mouth of the juicing body.
| 6| Put the pomace cup under the pomace outlet of the juicing body, close to the juice cup (the high end of the pomace cup shall be close to the pomace outlet, which is more conducive to pomace discharging).
| 7| Place the hopper on the upper end of the feeding barrel of the juicing body.
The hopper makes feeding ingredients more convenient, especially when processing small-grained ingredients such as grapes, strawberries, etc.
| 8| Turn on the power and get ready for work. (Make sure the switch is off before turning on the power)
| 9| Wash the fruits and vegetables, cut them into pieces that can be put into the feed inlet, and place them on the hopper for use.
Please remove kernels, hard seeds, thick or hard shell of fruits and vegetables first.
Note: Fruits such as sugar cane, guava, and mango cannot be juiced with this machine.
| 10| Turn the power switch (the indication mark on the switch surface is aligned with the “Hard” or “Soft” gear), and the product starts to work for less than 10 minutes.
.Do not touch the power switch with wet hands to avoid electric shock, electric leakage, or fire.
| 11| Put the ingredients into the feed inlet of the juicing body and push the ingredients with the pushrod.
When ingredients are put in, the force to push the ingredients should not be so great, and it is advisable that the ingredients just can be cut off. (Don’t put your fingers or other objects into the feed inlet of the juicing body! If the pomace cup or juice cup is full, should stop working and clean it before use.)
| 12| When the ingredients are processed and there is no more juice flowing out of the juicing nozzle of the juicer, turn the power switch to Off gear and disconnect the power. Please remove the juice cut from the juicing nozzle after the auger completely stopped. (The fresh juice should be drunk immediately. If it is exposed to the air for a while, its taste and nutritional value will be affected.)
Residues cannot be stored for long periods.
Do not touch the power switch with wet hands to avoid electric shock, electric leakage, or fire.

II. Tips for Fruit Selection

Select and use fresh fruits and vegetables, which contain more juice. Particularly suitable fruits include pineapple, celery sticks, apples, cucumbers, spinach, melons, tomatoes, oranges, grapes, and the like.
The thin skin of fruits and vegetables need not be peeled. Tangerine, pineapple, and other fruits and vegetables with thick skin need to be peeled. The seeds of citrus fruits should also be removed because they make the juice bitter.
When squeezing apple juice, the concentration of apple juice depends on the type of apple selected: The juicier the apple is, the clearer the juice will be, so please choose the apple type according to the concentration of juice you want.
Freshly juiced apple juice may quickly turn brown, and you can add a few drops of lemon juice to slow this process.
Leaves and leaf stems (such as lettuce) can be juiced with this machine
The nutrients of common fruits and vegetables are as follows:

Fruits/vegetables	Vitamins/mineral substances	KJ/Calorie
Apple	Vitamin C	200r 15010 (72 Caloric)
Apricot	Abundant in dietary fiber, containing calcium	30g= 8510 (20Calorie)
Beet	Good sources of folic acid, dietary fiber, vitamin C, and Good calcium

Maintenance and Preservation

Before washing this product, be sure to turn off the switch and disconnect the power supply.
Please timely wash this product after application.
The juicer body must not be washed with water. The stains on the body must be wiped with a drying rag or drying cotton cloth.
Please make sure the product is clean and dry before storage.
Please refer to the following steps to disassemble the juicer and then clean:

| 1| Take the pusher and the hopper first.
---|---|---
| 2| Hold the button near the juicing body down, and at the same time rotate the juicing body clockwise to take the body down.
If the button is not pressed, the body can’t be taken down.
| 3| After the juicing body is disassembled, take the juicing body cover, the juice fine strainer, and the auger down in proper order, and the removable parts can be cleaned with clear water.

Product Safety Indexes

Rated voltage	120V～
Rated power	150W
Rated frequency	60Hz
Continuous Working Hours	≤10 m inutes
Interval	≥20 m inutes

Applicable Standards

USA Standard: UL982

Fault Analysis and Troubleshooting

Fault phenomenon	Analysis of causes	Fault resolution

After connecting the power supply, turn on the switch, but this product cannot work.| 1. The power plug is not plugged in properly
2.The outlet is in poor contact
3. The internal cable of the main unit is off or the circuit board is damaged.| 1. Plug the power plug back in again
2. Replace the power socket and try again
3. Please send the product to the nearest maintenance shop for inspection
When this product is used initially, the motor smells terrible.| This is not an abnormal occurrence| If the product still emits this odor after repeated use, please send it to the nearest maintenance shop for inspection.
This machine stops during the application.| 1. The voltage is too low
2. Excessive or hard ingredients
3. The continuous working time is too long| 1. Check if the voltage is too low
2. Disconnect the power and remove the excess ingredients (Sugar cane cannot be juiced. Hard skin / hard core fruits and vegetables should be first removed the hard skin / hard core before juiced)
3. It is a normal phenomenon, and the motor will resume operation after a break
Noise when operating| 1. The auger and fine strainer are not fully installed, resulting in unsteady operation;
2. The start motor in the machine body breaks down.
3. Too noisy when some ingredients are juiced.| 1. Fully install the auger and fine strainer.
2. Please send it to the nearest maintenance shop for inspection.
It is difficult to unscrew the juicing body cover after juicing| 1. There is an oil stain on the surface of the juicing body cover;
2. The ingredients in the juice net are not juiced completely;| 1. Clean the surface of the juicing body cover;
2. Continue to turn on the machine, and squeeze all the ingredients, or long- press the “Reverse” key for several seconds to rotate the ingredients out of the juice strainer.

Note:
The above are analysis and resolution of common faults. As for other faults, please contact the Customer Service Department of this company or come to an appointed maintenance point of this company to change.
Be sure not to take apart or repair by yourself.

Facebook: #Mama’s Choice US
Message: #Mama’s Choice US
Email: [email protected]

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual >>