LABIGO LA1 Pro Electric Spin Scrubber Instruction Manual

ELECTRIC SPIN SCRUBBER
Model: KS-2619 

Thanks a lot for choosing our product! Please read this manual carefully before using and keep it for future reference.

PARTS INCLUDED

1. Main Handle
2. Power Button
3. Charging Port and Indicator Light
4. Charging Cover Bottom Extension
5. Release Button
6. Extension Handle
7. Length Adjust Button Scrubber Head| 8. Top Extension Release Button
9. Scrubber Head
10. Corner Brush
11. Dome Brush
12. Small Flat Brush
13. Large Flat Brush
14. Hook
15. Charging Adapter
---|---

SPECIFICATIONS

INSTALLATION INSTRUCTIONS

NOTE: Before assembling any component of this product, make sure the unit is turned off.

Assembly with Extendable Handle
Assembly finished, as shown in the picture.

1. Connect the Main Handle to the Extendable Handle until you hear a “CLICK”.
2. Next, connect the Scrubber Head to the Extendable Handle until you hear a “CLICK”.

Assembly without Extendable Handle
Connect the Main Handle to the Scrubber Head until you hear a “CLICK”. As the following picture shows.

Brush Head Assembly
Firmly hold the Scrubber Head with one hand and then press the selected brush on until secured.

How to pull out the brush head

Hold the connection part of the brush head and pull out vertically.

How to use the Extendable Handle

1. Turn on the adjustment button first, then adjust the length of the extendable handle.
2. Fasten the Length Adjust Button to fix the extendable handle.

How to use the hanging hook
You could install the hook into a bar or rod to hang the power scrubber.

How to charge
Open silicone Charging Cover and insert adapter for charging.
Next, plug adapter into electrical outlet.

SUGGESTION FOR USE OF ACCESSORIES

| Dome Brush: Round Brush is perfect as a concave cleaning brush for shower, tub, bathtub, sink, baseboard or toilet.
---|---
| Large Flat Brush: Large Flat Brush is used to clean large flat surface area, like hard floor, tile, wall, door, window, glass, counter, patio furniture, pool, soap scum, grim, stove, carpet, ceramic.
| Small Flat Brush: Small flat brush head ideals for cleaning smaller areas such as shower, kitchen, soap scum, grime, grease, stove, grill, counter, door.
| Corner Brush: Corner Brush is great for cleaning tile grout, edges, corners, cranny and tight places.

HOW TO CLEAN THE PRODUCT

Handle Part: Gently wipe handle part of the scrubber with a wrung soft cloth.
Brush Head: Disassemble the brush head and immerse it into the water to clean. Clean it with neutral detergent if it is difficult to clean.

CLEANING TIPS

a. For better cleaning effect, it is recommended to use the brush with detergent (such as Mold & Mildew Remover, Water Strain Remover, Oven Cleaner, Bleach Cleaner, All Purpose Cleaner).
You could use different detergents for different needs.
b. For removing stubborn stains, please soak stains into water and detergent for a while, and then use the scrubber to clean, it will shorten your cleaning time.

STORAGE

Suggestion for Storage: Store the scrubber in a ventilated and shade place. Avoid placing it in a wet place or being exposed to strong sunlight.

FAQ

1. Why doesn’t the red indicator light while charging?

A. Check if the charging socket is abnormal or power outage. B. If the indicator light is green after plugging in the adapter, the product is fully charged, just tum it on to use.

2. The charging indicator light doesn’t turn to green after charging over 5 hours.

A. Please check whether the socket and charging connection are loose, plug them tightly before charging. B. If the product is immersed in water during use, it will damage the internal circuit and cause abnormal charging. C. If neither of the above two conditions, please contact our customer service via email.

3. Why does the brush head stop spinning while working?

A. If the red light flashes for 30s and then stops, it may be that the user presses the brush head too hard to cause the prod- uct to stop automatically in the protection state. Only switch the ON/OFF button once or twice to return to normal. B. If the red light keeps flashing and doesn’t stop, it means that the product is in a low battery, and it needs to be fully charged before use. C. If not the above conditions, the product stops rotating after spinning less than 108, or the spin does not resume after pressing the ON/OFF button twice, please contact our customer service via email

4. Why does the charging indicator turn green (representing a full charge) but the brush head does not spin after being turned on?

A. Please check whether the brush head is tightly connected with the extension rod and handle. For the connection meth— od, refer to the installation guide. B. If it has been well-connected and the product has not been soaked in water before, but the scrubber does not spin after turning on or it stops spinning without pressing the brush head too hard, please contact our after—sales customer service via email.

5. Why does the brush head spin less than 90 minutes or not work after pressing ON/OFF button twice when the battery is fully charged?

Each user will use different downforce during use. If you keep pressing the brush head too hard, the working time will be less than 90 mins. In order to prolong the use time, please don’t press the brush head too hard, and frequently press it too hard will break the brush head.

WARM TIPS

1. Allow for transportation safety, the product you obtained is not fully charged. Please fully charge the product before first use.
2. Before using the scrubber, be careful not to get splashing stains into your eyes or on your skin.
3. When the battery is low, the red indicator light will flash, please charge the product in time.
4. When charging, the red indicator light is on. If there is no red light, please plug the adapter correctly, then press the power button again.
5. Please close the cover after charging to avoid water entering to cause the short circuit.
6. Please check whether there are any missing parts after receiving the product.
7. Please make sure that the scrubber is well-assembled before use.
8. Small scratches may occur when cleaning the surface of stainless steel, polished resin, artificial marble, wood, etc., please try to confirm beforehand. Please try it out in a small area and make sure that there are no abnormalities before cleaning.
9. Please do not use the charging adapter that is not supplied by the original producer.
10. It is recommended to rest the machine after working for 30 minutes.
11. Brushes are consumable which are not applicable to the warranty.
12. Please keep the power cord plug and hands dry to avoid the risk of electric shock.
13. Do not disassemble, repair or modify internal parts by yourself, please contact us if you have quality problems.
14. Always use proper eye protection when using the power scrubber with irritating substances. Rubber gloves are also recommended.
15. When changing accessories, please make sure to turn off the machine first.
16. Keep the hair, cloth or other parts of your body away from brush head to avoid convolving.

SAFETY INSTRUCTIONS

Caution: When using electrical appliances, basic safety precautions should always be followed, including the following:

1. This product is not a toy. Close supervision is required when any appliance is used by or near children. Store it out of reach of children.
2. If the charge cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard.
3. To protect against the risk of electric shock, do not put the battery charger in water or other liquid. Do not charge battery if it is wet or shows signs of corrosion.
4. Do not incinerate the battery. It can explode in a fire.
5. Do not attempt to use this charger with any other product.
6. Do not attempt to charge this product with any other charger.
7. Do not use the charger in wet or damp conditions.
8. For best results, do not charge a battery when it or the air temperature is below 40°F (5°C) or above 105°F(40°C).
9. Do not operate adaptor if it has received a sharp blow, been dropped, or otherwise damaged in any way. Do not disassemble the adaptor for any reason.
10. Do not abuse the cord. Do not carry the charger by the cord or yank the cord to disconnect.
11. Do not store or use the appliance close to high temperatures.

WARNING

1. The appliance is only to be used with the power supply unit provided with the appliance.(EC/EN 60335-1)
2. WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance. (IEC 60335-1)
3. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. (EN 60335-1)
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. (IEC 60335-1)

FCC STATEMENT

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>