Bear PBJ-B10U5 Professional Countertop Blender User Manual

: June 14, 2024
: BEAR

Table of Contents

Bear PBJ-B10U5 Professional Countertop Blender
Safety Precautions
Components and installation drawings
Marker of Blender
Buzzer Description
Functional Operation Instructions
Daily operation precautions
Care and maintenance
Common problem analysis
Warranty and Customer Service
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bear PBJ-B10U5 Professional Countertop Blender

Bear’s Words

If you love delicious smoothies, shakes or juice, Bear Countertop Blender is the best choice you need in your kitchen. This blender makes quick work of crushing ice and blending frozen fruit, leaving you with delicious drinks any time you desire.
Thank you for choosing Bear Countertop Blender.
Please read the following instructions carefully before use!

Safety Precautions

Please read this manual carefully before use.
Check whether the voltage you use is consistent with the rated voltage marked on the product.
Do not immerse the product,power cord or plug into water or other liquid to avoid fire, electric leakage or personal safety.
When using this product, adults should watch it.
Please unplug the socket after using, or before cleaning the product. Beforer emoving the mixing cup,make sure to cut off the power supply.
lf the power cord or plug is damaged,the electrical appliance fails,or the product is damaged due to other reasons,please stop using the product, and contact the customer service of the manufacturer or send the product to the nearest authorized maintenance network for inspection,maintenance, replacement and commissioning.
lf the power cord is damaged,it must be replaced by the manufacturer or authorized agent, or by a qualified technician,so as not to cause harm.
The product shall be placed on the table or flat place for use,and the power cord shall not be hung on the edge of the table or table.
Do not use the product at high temperature or near flammable gas and electric furnace.
Do not open the cup cover and contact the blade before the product stops running.
The blade is very sharp. Be careful when installing,removing and cleaning to avoid being cut by the blade.
Do not use accessories not recommended or sold by the manufacturer, including cups,blade base , etc., to avoid danger.
Do not immerse the cup into water
Before the machine is running, please make sure that the cup cover is installed in place,otherwise the machine cannot work normally.
The machine is not suitable for children,disabled people ，mental patients, people who are allergic to motor noise or are not familiar with the machine. Unless the guarantor gives full supervision and guidance to the above personnel. Children are not allowed to play with the product.Children under the age of 12 are not allowed to clean and maintain the machine to avoid danger.
This product can not be used outdoors.
This product is only suitable for household usage and similar usage.
The product and power cord shall be stored in a safe place to prevent children from pulling the power cord.
Keep this manual for future reference.

Components and installation drawings

Note: The above product pictures are for reference only, and the actual product appearance as well as color shall prevail.

Marker of Blender

Buzzer Description

When the power is turned on, it will ring once (1 second).
Every time click the button effectively, it will ring once (0.2 second). When the knob is turned to the corresponding function gear, it will ring once (0.2 second).
When the work finishes, it will ring 5 times (0.5 second ON+0.5 second OFF/1 sound) (in the application of countdown function instead of “Blend” function).
When the failure alarm goes off, it will ring 10 times. (0.2 second ON+0.3 second OFF/1 sound).
It will automatically return to the power-saving mode and ring 3 times after no operation. (0.1 second ON+0.2 second OFF/1 sound).

State Display Description

After power-on, the digital displays version number “U001”. All lights will be on for 1s after 1s to enter “standby mode” if no operation is carried out within 2 minutes. The machine automatically enters the “power-saving mode”, which means that the “ON/OFF” power light is on and all other lights are off.
Click “ON/OFF” in power saving mode to enter “standby mode”. All function lights are on and the display time is “00: 00” .

Functional Operation Instructions

“Pulse/Cleaning” Button
“Pulse/Cleaning” function: Press the “ON/OFF” key to immediately enter the standby state in the power-saving state; Press the “Pulse/Cleaning” key, and the machine will work. If you loosen your hands, power failure stops in the standby state. If you press the “Pulse/Cleaning” key in the power-saving state, it will not work.

“ON/OFF” Button

In the power-saving state, press the “ON/OFF” button to immediately enter the standby state;
In the standby state, press the “ON/OFF” button to immediately return to the power-saving state;
When performing work, press “ON/OFF”, that is stop back to standby state.

Knob Function
Turn the knob to any one of the functions of “Blend”, “Nut” “Puree”, “Salsa”, “Milkshakes”, “Juice”, “Ice Crush” and “Smoothies” with the Corresponding function light flashing (1 second/flash) and other function lights is off. Click the “ON/OFF” button to work with the corresponding working function lights always on. (The “Blend” function needs to be started with a gear selected.)

“Blend”: Select the “Blend”, which is off by default at first. Press “Speed+” or “Speed-” to select the addition and subtraction gear and click “ON/OFF” to start the work. Press “Speed+” or “Speed-” to select the addition and subtraction gear in work.
“Nut”: Select the “Nut”, and click “ON/OFF” to start work. The countdown begins with “02:27” (2 minutes 27 seconds).
“Puree”: Select the “Puree”, and click the “ON/OFF” key to start work. The countdown begins with “02:00”( 2 minutes).
“Salsa”: Select the “Salsa”, and click the “ON/OFF” key to start work. The countdown begins with “02:10” (2 minutes 10 seconds).
“Milkshakes”: Select the “Milkshakes”, and click the “ON/OFF” key to start work. The countdown begins with “01:10”(1 minute10 seconds ).
“Juice”: Select the “Juice”, and click the “ON/OFF” key to start work. The countdown begins with “01:57” for (1minute 57 seconds).
“Ice Crush”: Select the “Ice Crush”, and click the “ON/OFF” key to start work. The countdown begins with “02:00” (2 minutes).
“Smoothies”: Select the “Smoothies”, and click the “ON/OFF” key to start work. The countdown begins with “02:00” (2 minutes).
*Every time the function is finished, the alarm sounds, and “END” is displayed (Display the last 3 digits).

Notes: Time display requirements: When the leftmost digit of the time display is zero, it will not be displayed. If the countdown is 1 hour and 30 minutes, it will be displayed as “1: 30”; if the time is 40 seconds, it will be displayed as “0: 40”

Note: Pay attention to the risks that may cause personal injury or property damage.

Do not lift the cup body and open the lid during the operation so as to avoid interrupting normal operation.
Do not make the product come into contact with movable components including blades, motors, etc. when the product is energized and operating, so as to avoid injury or damage to the product.
Do not open the lid to add ingredients during the product operation, otherwise it is prone to splashing, causing injury or property damage.
Correct method: Open the feeding lid in the middle of the mixing cup lid, and feed the ingredients through the hole in the lid. (Figure I)
Do not use accessories and components other than the product to avoid fire and personal injury.
Do not run the cup idly (which refers to no ingredients in the cup) or overload it.
Please wait for the blade to completely stop rotating and make sure to disconnect the power before removing the detachable parts to avoid danger.
Do not disassemble or modify the product by yourself.
Please add the ingredients as specified by the instructions or recipes (MAX 1200ml) since adding excessive amounts of ingredients may damage the motor, causing spillage or damage

Daily operation precautions

Do not lift the cup body and open the lid during the operation so as to avoid interrupting normal operation.
Please make sure that the mixing cup and other components have been installed in place before the product is connected to the power supply, so as to avoid danger.
Please confirm that the power supply of the product is 120V~ 60Hz before use.
Do not plug or unplug the power plug with wet hands, so as to avoid electric shock.
Do not use other equipment to directly heat the components of the product.
Do not place the product near high temperature, strong magnetism, flammable and explosive gas, so as to prevent damage, malfunction or fire to the device.
Please operate the product on a water platform, instead of a sloping or unstable table or carpets, towels and other fabrics, and keep away from the edge of the table, so as to prevent injury or damage to the product.
Please unplug the power plug first and then remove the ingredients blocking the blade in case the blade is stuck, so as to prevent scratches or damage to the product.
Do not move the product during operation, so as to avoid overflow of ingredients, causing electric shocks.
Please disconnect the power supply and let it cool for 1 hour before using in case the product stops working during operation, which may be caused by the motor temperature control protection.
Please disconnect the power supply before disassembling, installing, adjusting or cleaning any component of the product.
Notify the manufacturer, its maintenance department or professional personnel in similar departments to replace the power cord in case of damage, so as to avoid danger.
Do not immerse the entire glass mixing cup in water or other liquids, nor directly rinse the handle and cup base of the glass mixing cup, so as to avoid water entering the handle and the heating plate of the cup base, causing a short circuit and danger.
Do not get water into the handle of the glass mixing cup and the coupler on the main body. Use it after wiping dry in case water enters.
Please promptly unplug the power plug when no one is using the product, so as to prevent short circuit and other issues.
Do not put any components of the product in the dishwasher, microwave oven and disinfection cabinet for cleaning and disinfection, so as to avoid damage.
Store the product out of reach of children, do not allow people with impaired limbs, sensory or mental impairments to use or play with the product.
Please hand the product over to the competent department for recycling when the product or product packaging is discarded, and cut off the power cord when the product is discarded.
Use the mixing cup of the product only in conjunction with the original host.

Care and maintenance

Unplug the power plug before cleaning the product.
Please promptly clean the product after use.
Do not soak in water or other liquids or directly rinse the outside of the main body and the glass mixing cup, which can be wiped with a damp cloth, so as to prevent leakage or damage to the device. (See Figure II, III, IV.)
Please rinse the inside of the cup body and food contact accessories with clean water, and wipe them dry in case of cleaning; Be careful to avoid cutting your hands by sharp blades in case of evacuation or cleaning concerning the inside of the mixing cup.
Do not use steel wool, abrasive cleaners or corrosive liquids to clean the product.
Make sure that the product is clean and dry before storing the product.
Store the product in a dry place and avoid direct sunlight.
Quick cleaning: Add a proper amount of water to the mixing cup, install the cup lid and the feeding lid, install the mixing cup on the main body, turn on the power, and press and hold the “Inching / Cleaning” button for 5-10 seconds. After cleaning, disconnect the power supply, remove the mixing cup, pour out the water in the cup and wipe it dry.

Note: It is recommended to use dishwashing handkerchiefs and dish soap to clean them by hand in case meat and other greasy ingredients are filled in the product.

Common problem analysis

Notes

Do not disassemble the machine privately in case the problem cannot be solved, please contact the after-sales service department for after-sales repair.
Please refer to the actual product without prior notice in case the above content is inconsistent with the actual product due to changes in model or parts. Please understand!

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment) This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchas econtact. This product should not be mixed with other commercial wastes for disposal.

Warranty and Customer Service

If you are in any way dissatisfied with this product kindly return ship it to Amazon in its original box for a full replacement or refund.
All parts and materials are guaranteed for a one year period from date of purchase, against malfunction or defects in materials or workmanship.
All enquiries may be addressed to Bearwarranty@bears.com.cn and we shall respond to you as soon as possible.
If you appreciate and love our products, please stay connected with us. More surprises may be found at …